TallyGenicom 9050N - Quick Start Manual - General Safety Guidelines

Chapter 1 Introduction

Quick Start Guide

2

General Safety Guidelines

Before operating the printer, read the following instructions carefully:

z

Follow all the operating procedures provided in this manual. 

z

Follow all the hazard warnings on the printer and in the manual. Failure to do 

so can cause injury to yourself or damage to the printer.

z

Do not perform any operation or action in any way other than provided in this 

manual. When in doubt, contact your dealer or service company.

z

Keep in mind that hazard warnings in this manual or on the printer cannot 

cover every possible case, as it is impossible to predict and evaluate all circum-

stances beforehand. Be alert and use your common sense.

Safety

Precautions

This printer is available in two models, the 110 V model and the 230 V model. 

The specifications that apply to your printer depend on your machine 

configuration. To prevent fire or shock hazards, connect the power plug only to a 

properly rated power outlet.

Handling the

Printer

z

The weight of the printer without paper tray, toner cartridge, and paper is 

about 41 kg (90 lbs). Never attempt to lift the printer alone. 

z

To lift the printer, have two individuals facing each other from each side of the 

printer grasp the recessed areas on each side of the printer. Do not lift the 

printer by grasping any area other than these recessed areas.