1. DL manuals
  2. TallyGenicom
  3. Printer
  4. Intelliprint ML320
  5. User Manual

TallyGenicom Intelliprint ML320 User Manual

Summary of Intelliprint ML320

  • Page 1

    Dec 98 publication no. Gek-89570 high capacity feeder (hfc) setup guide 1 high capacity feeder (hcf) setup guide the optional hcf unit allows for high volume printing. 1. Unpack the high capacity feeder from the shipping container 2. Ensure that the printer power switch is set to the off [ o ] posit...

  • Page 2

    Publication no. Gek-89570 dec 98 2 high capacity feeder (hfc) setup guide 3. Disconnect the power cord from the wall outlet. 4. Lock the two front casters of the hcf unit..

  • Page 3

    Dec 98 publication no. Gek-89570 high capacity feeder (hfc) setup guide 3 5. With the assistance of another person, gently lower the printer onto the hcf unit while noting the alignment. 6. Pull tray 2 of the main unit all the way out until it stops. Then lift it up slightly and com- pletely remove ...

  • Page 4

    Publication no. Gek-89570 dec 98 4 high capacity feeder (hfc) setup guide 7. Locate the two supplied connecting parts and screws. 8. Using one of the thumbscrews, tighten the right connecting part to the printer as indicated. 9. Using the other thumbscrew, similarly secure the left connecting part t...

  • Page 5

    Dec 98 publication no. Gek-89570 high capacity feeder (hfc) setup guide 5 10. Insert trays 2 and 3 back into the printer and hcf unit respectively. 11. Remove the tape securing the connecting cable of the hcf unit. Securely plug the hcf cable into the tray connector on the printer..

  • Page 6

    Publication no. Gek-89570 dec 98 6 high capacity feeder (hfc) setup guide 12. Connect the power cord to the wall outlet. 13. Turn the printer power switch to the on [ i ] position. The installation of the optional high capacity feeder (hcf) is now complete. ◆ ◆ ◆.