Talon Tools AC211114 User Manual

Summary of AC211114

  • Page 1

    Model no. Ac211114/ac211114a/ac21111n4/ac211116/ac211116a user manual electric chain saw 6096-2111xx warning • please read beware of kickback. Hold chain saw firmly with both hands when using. For your own safe- ty, please read and follow the safety precautions in this manual before attempting to op...

  • Page 2

    Au 3 19. Warning! The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury. 20. Have your tool repaired by a qualified person this electric tool is in accordance with the relevant safety requirements. Repairs should only b...

  • Page 3

    5 au 1. Rear handle 2. Oil tank cap 3. Trigger 4. Sprocket cover 5a. Bar retaining nuts (ac211114/211114a) 5b. Chain tensioning ring (ac211116/ac211116a/ ac21111n4) 6. Electric motor 7. Electric cord 8. Chain brake lever / hand guard 9. Trigger lock / button 10. Front handle 11. Guide bar 12. Saw ch...

  • Page 4

    Au 7 • guide bar / saw chain installation (model : ac211116/ac211116a/ ac21111n4) to install guide bar & saw chain: 1. Place power unit on flat surface. 2. To remove the side cover (a), turn the knob (b) count- er-clockwise. (fig. 4a) 3. Screw (c) the tension plate (d) on the bar. (fig. 4b) 4. Sprea...

  • Page 5

    9 au the chain brake is disengaged (chain can move) when the brake is pulled back and locked. This is the normal running position (fig. 9a). The chain brake is engaged (chain cannot move) when the brake is in forward position (fig. 9b). Note: the motor will not start if the chain brake is in the eng...

  • Page 6

    • guide bar maintenance most guide bar problems can be prevented merely by keeping the chain saw well maintained. Incorrect filing and non-uniform cutter and depth gauge settings cause most guide bar problems, primarily result- ing in uneven bar wear. As the bar wears unevenly, the rails widen, whic...

  • Page 7

    Any service must only be carried out by a qualified tech- nician at an authorized service centre. 1. Place switch in “off” position and unplug the power supply before the appliance is serviced, cleaned or maintenance is performed. 2. Keep air intake clean and air vents free of debris to avoid overhe...