Warning • please read for your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your trimmer before each use. Model no. Aka104 safety operation mainten...
Cultivator attachment warranty the benefits conferred by this warranty are in addition to all other conditions and warranties in respect of this product which the consumer may have taken under the trade practices act 1974 or by any legislation of a state or territory of australia. This product is wa...
2 general safety rules au warning! When using gas tools, basic safety precautions, including the following, should always be followed to reduce the risk of serious personal injury and/or damage to the unit. Read all these instructions before operating this product and save these instructions. Meanin...
3 au 1. Warning: to reduce the risk of electrical shock, use only extension cords approved for outdoor use. 2. Cords sets: make sure your cord set is in good condition. When using a cord set, be sure to use a cord that is heavy enough to carry the current that your unit will draw. An undersized cord...
4 au 1. Tine guard 2. Tines 3. Gear box 4. Shaft general identification specifications blade width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210mm weight with motor . . . . . . . . . ...
Au 5 • installing the attachment note: to make installing or removing the attachment easier, place the unit on the ground or on a work bench. 1. Turn the knob (a) counterclockwise to loosen (fig. 1a). 2. While firmly holding the attachment (b), push it straight into the quick-change coupler (c) unti...
Au 6 • maintenance and storage 1. Keep machine, attachments and accessories, including where appropriate the battery, in safe working condi- tion. If appropriate, remove the battery to protect it from frost and properly charge it if necessary. 2. Check shear bolts, engine mounting bolts and other bo...
