Talon Tools AM3065 Owner's Manual

Summary of AM3065

  • Page 1

    Rotary lawnmower owners manual safety operation assembly maintenance model no. Am3065 model no. Am3065 lawn mower warranty the benefits conferred by this warranty are in addition to all other conditions and warranties in respect of this product which the consumer may have taken under the trade pract...

  • Page 2

    Congratulations on your purchase of a quality talon product. This manual covers the operation and maintenance of the talon walk behind mowers. Please read and understand this manual before using your new mower. If assistance is required, please contact talon tools australia or any talon tools mower ...

  • Page 3

    • inspect the area where the equipment is to be used and remove all stones, sticks, wire, bones and other foreign, hard objects before mowing; they could be thrown by the blade. • never mow while barefoot or wearing open toe sandals or thongs. Wear long trousers and heavy-duty shoes. It is advisable...

  • Page 4

    General, plastic containers are unsuitable. • stop the engine and disconnect the spark plug lead before inspecting the mower if: (a) the mower begins to vibrate abnormally, or (b) after striking a foreign object. • check the catcher for wear and tear, and replace any worn or broken parts. • to reduc...

  • Page 5

    Au 8 handle assembly 1. Position the middle handle section (a) over the handle bracket (b) attached to the deck so that the screw holes on both handles line up. (fig. 2a) 2 . To attach the middle handle section to the handle bracket you will requie two 51mm screws(c), two knobs (d), 2 square inset c...

  • Page 6

    Fuel use only clean fresh petrol at all times, preferably unleaded, with an octane rating of at least 91. Four stroke (cycle) engines use straight fuel. Fuel filling 1. Position the mower on a level surface in a well-ventilated area. 2. Clean around the fuel tank. 3. Remove the fuel tank cap. 4. Pla...

  • Page 7

    Ensure that the engine has been prepared correctly and that the fuel tap is turned on. We recommend that you check the oil level before every mowing session. Cold starting 1. Set the engine control to the “choke” position. 2. Turn the fuel tap to the “on” position. (fig. 7) 3. Stand to the right of ...

  • Page 8

    Turn mower off before adjusting cutting height. The single point cut height control adjusts all four wheels simultaneously. To operate, steady the mower by grasping the handle with one hand, pull the lever outwards from the mower with the other hand, and move it to the desired setting. For heavy or ...

  • Page 9

    Check the blade mounting bolts at frequent intervals for proper tightness. Check the blade condition frequently, particularly if the mower has hit a foreign object or is vibrating. Sub-standard cutting and catching will result from a neglected blade. Your authorised dealer can replace blades as nece...

  • Page 10

    Deck cleaning wipe deck with a damp cloth. Under deck wash connector 1. Attach click on hose fitting to the connector. (fig.11) 2. Start mower and set engine speed control to fast. 3. Turn hose on. 4. Allow approximately one minute to clean the underside of the deck. 5. Turn off hose and stop engine...

  • Page 11

    • the best time to mow your lawn is the early afternoon. By this time the grass has had a chance to dry out. Also the sensitive newly cut grass area isn’t exposed to the direct sun. • for healthy growth, grass should not be cut too short. Using the lowest settings can result in destruction of the cr...