Talon Tools AT2307A User Manual
MODEL NO. AT2307A
CAUTION
Read all safety instructions carefully before attempting to operate. Retain for future reference.
SAFETY
OPERATION
MAINTENANCE
Electric Line Trimmer
USER MANUAL
DOUBLE INSULATED
1
GENERAL SAFETY RULES
GB
WARNING!
When using electric tools, basic safety precautions, including the following, should always be followed to
reduce the risk of fire, electric shock and personal injury.
Read all these instructions before operating this product and save these instructions.
Meaning of symbols marked on the product
Read the user manual before using the machine
Wear safety goggles to protect your eyes
Wear ear protector to protect against noise
Wear gloves to protect your hands
Wear safety boots to protect against electric shock
Take care not to expose this tool to rain
Wear dust mask to protect against dust
Disconnect from supply immediately, if the supply cable is damaged
•
Keep work area clean
Cluttered areas and benches invite injuries.
•
Consider work area environment
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well
lit. Do not use power tools where there is risk to
cause fire or explosion.
•
Keep children away
Do not let visitors touch the tool or extension cord. All
visitors should be kept away from area.
•
Store idle tools
When not in use, tools should be stored in a dry, high
or locked up place, out of reach of children.
•
Do not force the tool
It will do the job better more safely at the rate for
which it was intended.
•
Use the right tool
Do not force small tools or attachments to do the job
of a heavy duty tool. Do not use tools for purposes
not intended.
•
Dress properly
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
•
Use safety glasses
Also use face or dust mask if the cutting operation is
dusty.
•
Do not abuse the cord
Never carry the tool by the cord or yank it to discon-
nect it from the socket. Keep the cord away from
heat, oil and sharp edges.
•
Do not overreach
Keep proper footing and balance at all times.
•
Maintain tools with care
Keep cutting tools sharp and clean for better and
safer performance. Follow instructions for lubrication
and changing accessories. Inspect tool cord periodi-
cally and if damaged have it repaired by an author-
ized service facility. Inspect extension cords periodi-
cally and replace, if damaged. Keep handles dry,
clean and free from oil and grease.
•
Disconnect tools
When not in use, before servicing and when chang-
ing accessories such as blades, bits and cutters.
•
Avoid unintentional starting
Do not carry a plugged-in tool with a finger on the
switch. Ensure switch is off when plugging in.
•
Use outdoor extension leads
When tool is used outdoors, use only extension cords
intended for outdoor use.
•
Stay alert
Watch what you are doing. Use common sense. Do
not operate tool when you are tired.
•
Check damaged parts
Before further use of the tool, a guard or other part
that is damaged should be carefully checked to
determine that it will operate properly and perform its
intended function. Check for alignment of moving
parts, free running of moving parts, breakage of
parts, mounting and any other conditions that may
affect its operation. A guard or other part that is dam-
aged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated
in this instruction manual. Have defective switches
replaced by an authorized service facility. Do not use
the tool if the switch does not turn it on and off.
•
Warning!
The use of any accessory or attachment, other than
those recommended in this instruction manual, may
present a risk of personal injury.
•
Have your tool repaired by a qualified person
This electric tool is in accordance with the relevant
safety requirements. Repairs should only be carried
out by qualified persons using original spare parts,
otherwise this may result in considerable danger to
the user.
•
Plug and Socket
Please choose a plug and socket that matches the
plug on the unit.
6096-230702