Tamco Ranger Instruction Manual & Parts Catalogue - Electronic Speed Controller

Electronic Speed Controller

Basic Wiring Diagram

Specification 

input voltage

（V）

6V-8.4V DC

BEC output voltage

（V）—current（A）

6V—2A

Output Current 

Operating Current 40A Max 320A, 

          Backward 160A

Motor

Above  540 17T

ESC Size  

                          46.51 x 32.36 x 37.10mm 

Operational Notes

Turn on Transmitter and connect battery. 

Turn on the low voltage switch followed by the power switch, this will produce a red light and a

audible sound from the motor.

The ESC has a low voltage protection function, if the voltage of the battery drops to low the power 

will cut off, if this happens turn off the car and transmitter and recharge battery.

If you remove have to remove the ESC unit for service or repair, please ensure you re connect the 

battery connectors correctly by matching the polarities/colours.

Please Note. – The ESC and Motor can become hot if used constantly, if this happens disconnect battery 

and ESC and allow them to cool down before continuing.

Receiver

Steering 

Servo

E.S.C

Battery Pack

Motor