Tcc-1200 operation manual Ⅰ .Machine specifications ： (1) power requirement ： 220v/50hz (2) rated current ： 12a~14a (3) consumption power ： 3000w Ⅱ .Functions and operation instructions (1) hot lamination ： a. Use hot laminating film, feed the film onto the rods as picture (a). B. Turn on the machin...
Warning: shutting down the machine before reaching 50 ℃ does serious and permanent damage to the rollers, voiding all warranty. (2) cold lamination ： a. Use cold laminating film. B. Fix the leading edge of release liner on the receiving roller by using a tape. Please see picture (b). C. Turn the mac...
(4) step motion: (a) when the motor speed on the control panel is “0”: the motor will run if you step on the pedal. The motor will stop running once your foot leaves the pedal. (b)when the motor speed on the control panel is not “0”: it means that the motor runs according to the speed you set. If yo...
