1. DL manuals
  2. Tamiya
  3. Toy
  4. T55A
  5. User manual

Tamiya T55A User manual

Summary of T55A

  • Page 1

    1) this kit is designed for experienced model makers. It may be do not apply cement modelling knife 4) visit www.35rctank.Com for addition tips and update information. If you have the required skills and tools. Difficult for beginners. Please read this manual thoroughly to see 3) keep room well vent...

  • Page 2

    Lower hull 1 copyright 2017 www.35rctank.Com page 2 make round holes with a circular file lower hull lower hull inside to make room for torsion bars, remove 0.5mm 4mm remove a3 remove 4mm make slot for sprocket set screw 2 torsion bars torsion bar mount (l) 4.5mm spacer 4.5mm spacer torsion bar moun...

  • Page 3

    3 2 torsion bars gearbox copyright 2017 www.35rctank.Com page 3 drill 1.2 x 8mm deep hole 8 a12, a13, a36, a37 cut 0.3mm slot metal torsion bar insert torsion bars into slot insert torsion bars into slot.

  • Page 4

    6 speaker copyright 2017 www.35rctank.Com page 4 4 sprocket and wheels do not insert polycap remove a10 for smooth wheel rotation, enlarge hole with 4.2 drill 4.2 5 turrret ring gear turret ring gear attach b9 temporary for alignment turret ring gear upper hull b9 b9 remove 1mm ps partition plate fo...

  • Page 5

    7 connecting upper and lower hull copyright 2017 www.35rctank.Com page 5 16 5 5 5 13 1mm ps plate 1mm ps plate x4 x4 attach to lower hull 8 main gun remove alignment mark metal barrel drill 2.5mm through hole enlarge hole for recoil spring.

  • Page 6

    8 main gun copyright 2017 www.35rctank.Com page 6 c15 turret servo assembly recoil spring insert barrel and secure set screw 9 turret servos drill 4.5mm screw holes m2x5 attach to upper turret 10 main gun led press fit here, do not apply adhesive led expose during recoil.

  • Page 7

    Acu connections secure acu with m1.7 screws keep cables away from moving parts 12 attach turret 13 install mtc-2 mini tank controller secure mtc-2 by m2 x 5 screws copyright 2017 www.35rctank.Com page 7 11 m2x5 acu mount secure cables with adhesive tape notice cable positions mtc-2 mount mtc-2 power...

  • Page 8

    14 lower hull connections micro receiver spektrum 2.4g ar6110e 1 cell 3.7v lipo battery carboard copyright 2017 www.35rctank.Com page 8 16 using lipo battery 2) make sure battery is small enough to put inside the lower hull. 3) solder connector for mtc-2 as shown. Keep original connector for chargin...