Tamron A005 Specification

Summary of A005

  • Page 1

    R sp 70-300mm f/4-5.6 di vc usd for canon and nikon (model a005) sp 70-300mm f/4-5.6 di usd for sony (model a005) thank you for purchasing the tamron lens as the latest addition to your photographic equipment. Before using your new lens, please read the contents of this owner’s manual thoroughly to ...

  • Page 3

    Attaching and removing the lens * how to mount the lens remove the rear cap of the lens. Align the lens attachment mark (14) on the lens barrel with its counterpart on the camera mount and insert the lens. For nikon models, align the lens attachment mark with the dot on the camera and rotate the len...

  • Page 4

    Vc mechanism (ref. Fig. 1, 5 & 6) (mounted for nikon and canon models) vc (vibration compensation) is a mechanism that reduces the image blur caused by hand-held shooting. When using the vc, pictures can be taken at shutter speeds up to a maximum of 4 stops slower than the speed when the vc is not u...

  • Page 5

    Lens hood (ref. Fig. 1, 7 & 9) a bayonet-type lens hood is provided as standard equipment. We recommend shooting with the hood attached whenever possible as the lens hood eliminates stray light, which is harmful to the picture. However, please be aware of the precautions stated in the next section w...

  • Page 6

    -certain models may indicate the maximum and minimum aperture values of the lens in approximate numbers. This is inherent to the design of the camera and not an indication of an error. To ensure long-term satisfaction -avoid touching the glass element surface. Use photographic lens cloths or blowers...