Thank you for purchasing a tanacom 500s. To take full advantage of the reels many useful functions, please read this manual carefully before using. Retain this manual for future reference. Operating manual reference reference.
Index caution precautions power source how to connect the reel to the power source about the power source battery indicator maintenance about maintenance maintenance procedure handling and maintenance of the power cord maintenance of the power cord other maintenance points names of the buttons and t...
End of the line do not allow end of line to be wound onto the spool.This may cause synchronization with the levelwind to be lost, a condition that can damage the levelwind due to the reelʼs high power output. Should this happen, line should be removed from spool and rewound. After each trip, attach ...
2 power source how to connect the reel to the power source about the power source battery indicator 1. Attach the cord clips to the battery. Red covered clip is the plus (+), and the black covered clip is the minus (-). 2. Insert the connector into the reel. After this, the display appears as below....
3 maintenance about maintenance maintenance procedure this is a washable reel. Wash away salt residue and grit after fishing 1. Wash the reel with a dish washing detergent and a soft sponge. Do not use solvents. Do not use soap or other detergents. Other soaps or solutions may damage the reel both e...
4 handling and maintenance of the power cord maintenance of the power cord follow the restrictions below to avoid cord problems. Do not cut or connect your cord by yourself as it can cause unintended problems. - wipe the power cord with a damp cloth and dry it well. - pay special attention to drying...
5 names of the buttons and the display 4 mode display mode button depth counter reset button 1 2 3 5 chumming timer (power indicator, time to wind up, timer display) reset mode.
6 names of the buttons and the display auto line feeding is employed. Default setting is off. Pressing the reset button makes this indicator appear. (if the reset button is not pressed, auto stop will work at 5.0m from the broadside.) if the supply voltage drops, the indicator will blink. (pressing ...
7 names and functions of each part free spool adjustment waterproof tournament drag power lever clutch level wind finger guard handle enclosed items manual cd-r power cord storage bag levelwind threader 1 2 3 5 4 6 loosen tighten loosen tighten.
8 - it adjusts brake tension on the spool to prevent backlash or line slack caused by dropping the line with hook and sinker. - you can freely adjust winding power, or winding speed, from zero (on/off) to maximum, in 32 steps, by using the lever. - tilting the lever forward adds power and speeds up ...
9 line data input (when line length is known) this method is used when the line length is known before winding. In the example below, pe 6 – 280m is wound. 1. Run line through the levelwind guide and tie it onto the spool. The levelwind threader makes this process easier. Make sure to tie the line o...
10 attention 1. Do not wind the end of the line onto the spool because it causes incorrect length calculation. Move the power lever to off position, and wind manually when nearing the end of the line. Off 9 10 12 10. Press reset button for 2 seconds, until the display shows 300 . (300 is the default...
11 line data input (with backing line) this method requires use of daiwa braided line that is color coded to show length and has a total length greater than 100 m. Levelwind guide backing line main line pin power lever backing line tie 1. Run the backing line through the levelwind guide and tie it o...
12 line data input (with backing line) 9. Wind on another 100 m of line, keeping line tension at the suggested level. 8. When the line length input screen appears, press the mode button again to let the back line 1 input screen appear. With the power lever moved forward, p2 changes into a tension in...
13 line data reset (allows new depth setting) this method is used for data re-input which is to be made after the main line is wound on to the spool. This method requires a main line of 100m or longer specific length. 1. Turn on the electricity. Or 2 3 p3 line data reset 2. Press the mode button for...
14 line data input (inputting the drawer) 5 7 5. Press the reset button for 2 seconds. This will show the digits 100 in the lower area of the counter. 6. Pull an additional 50m of line from the spool. 7. Press the reset button for 2 seconds to show 100.0 on the upper counter. 8. Wind up the 100m of ...
15 functional setting operation (1. Mode setting display) 1.There are many useful functions in the mode 2.Use the power lever to change numerical values on the setting displays for each function. Complete your adjustments and lock in the values by pressing the mode button . How to set the many funct...
16 surface depth setting attention 1. When new line is wound up, or when line has been pulled under heavy tension, line stretch may cause a gap in the depth reading at the surface. Simply reset the surface setting with the reset button . Before you begin fishing, make sure the counter is set to zero...
17 functional setting operation (3. Auto stop function) auto stop auto stop automatically brings your terminal rig to the surface, stopping consistently at your pre-set depth preference. It eliminates the need to constantly monitor depth as it comes up. - in the electric winding mode, the winding st...
18 2 auto stop setting the auto stop depth may be set to meet your own specific needs. - auto stop adjusts to operate at depths from 1 m to 5 m (in 10 cm increments). - it prevents accidentally winding swivels, terminal rigs etc. Into the rod tip and stops your rig at a consistent depth for convenie...
19 line feeding function the line feeding function lets out line with the motor assisting the spool. - the line feeding mechanism begins to work at a depth of 2.5 m below the pre-set auto stop depth. - if line feeding stops while a rig is falling, it will not start again unless you wind up the line ...
20 chumming timer this function provides a useful timer. Attention pressing the mode button while the timer is in operation re-starts the timer from 0.0 . Functional setting operation (5. Chumming timer ) - this function displays the time passed after the presentation of your bait or lure. It can be...
21 useful functions various alarms many kinds of information are indicated by audible alarms. Display light backlighting of the display provides easy reading for early morning or night fishing. Power lever alarm - placing the power lever at max or off positions evokes an alarm. Auto stop alarm - whi...
22 reel specifications reel specification list counter display 20 40lb-470m(510yds) 50lb-350m(380yds) 60lb-300m(325yds) 0.50mm-230m(250yds) 0.55mm-190m(205yds) number of ball bearings range of acceptable voltage max winding speed (no load) no load stall max no load depth display range -hi speed (no ...
23 parts list tanacom 500s tanacom 500s no, parts name parts no, no, parts name parts no, no, parts name parts no, there may sometimes be a difference between the purchased reel and the dismantled parts chart or the parts list above due to the adjustment process etc. We appreciate your understanding...
24 trouble shooting 17 8 2 2 4 2 2 16 18 16 16 9-14 symptom possible causes to do ref. Page motor does not respond to the power lever counter display does not appear. The reel jigs on its own. Auto stop function does not work there are counter errors. Did not pull the lever to off position. Unstable...
Reference/référence/hinweis instrucciones/riferimenti http://www.Daiwa-france.Fr/ http://www.Daiwa-cormoran.Info/ daiwa sports limited netherton industrial estate, wishaw ml2 0ey, lanarkshire,scotland, u.K. 01698-355-723 http://www.Daiwasports.Co.Uk/ company name address tel no. Web address company ...
