Owner’ owner’ owner’ owner’ owner’s man s man s man s man s manual ual ual ual ual model numbers: ecs-3301/3351 ecs-3301/3351 ecs-3301/3351 ecs-3301/3351 ecs-3301/3351 chainsaws chainsaws chainsaws chainsaws chainsaws p/n 00127 date 04-23-01 supplier to the outdoor power equipment industry ism, inc....
Www.Tanakapowerequipment.Com 1 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 before using this unit: • read the operator’s manual carefully. • check that the cutting equipment is correctly assembled and adjusted. • start the unit and check the carburetor adjustment. See “maintenance”. One-hand...
Www.Tanakapowerequipment.Com 2 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351.
Www.Tanakapowerequipment.Com 3 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 2. Warnings and safety instructions operator safety warning! The tree-service chain saws are designed especially for tree care and surgery. Only persons trained in tree care and surgery may use this saw. Observe all l...
Www.Tanakapowerequipment.Com 4 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 3. Assembly procedures warning! Never try to start engine without side case securely fastened. 1 . Remove chain bar clamp nuts. 2. Remove the side case (1) while pinching the rear part of the side case (1) .(fig.1 -1)...
Www.Tanakapowerequipment.Com 5 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 4. Operating procedures fuel (fig. 2-1) warning! The chainsaw is equipped with a two-stroke engine. Always run the engine on fuel, which is mixed with oil. Provide good ventilation, when fueling or handling fuel. Fuel...
Www.Tanakapowerequipment.Com 6 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 chain oil (fig. 2-1 b) fill the chain oil reservoir (2). Always use good quality chain oil. When the engine is running, the chain oil is automatically discharged. Adjustment of chain oil supply the chain oil quantity ...
Www.Tanakapowerequipment.Com 7 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 chain brake operation (optional) (fig. 2-5) chain brake (1) is designed to activate in an emergency such as kick-back action. Please check to verify that it works properly before use. Application of brake is made by m...
Www.Tanakapowerequipment.Com 8 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 warning! Never use the saw with only one hand. You cannot control the saw properly and you may lose control and injure yourself severely. Keep the saw body close to your body to improve control and reduce strain. When...
Www.Tanakapowerequipment.Com 9 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 warning! Always observe the general conditions of the tree. Look for decay and rot in the trunk which will make it more likely to snap and start to fall before you expect it. Look for dry branches, which may break and...
Www.Tanakapowerequipment.Com 10 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 limbing limbing is removing the branches from a felled tree. Warning! A majority of kickback accidents occur during limbing. Do not use the nose of the guide bar. Be extremely cautious and avoid contacting the log, o...
Www.Tanakapowerequipment.Com 11 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 thick log, larger than guide bar length begin by cutting on the opposite side of the log. Pull the saw towards you followed previous procedure. (fig. 2-7j) if the log is lying on the ground make a boring cut to avoid...
Www.Tanakapowerequipment.Com 12 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 in the carburetor, fuel is mixed with air. When the engine is test run at the factory, the carburetor is basically adjusted. A further adjustment may be required, according to climate and altitude. The carburetor has...
Www.Tanakapowerequipment.Com 13 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 cleaning the air filter remove the air filter cover and the filter (1). Rinse it in warm soap suds. Check that the filter is dry before reassembly. An air filter that has been used for some time cannot be cleaned com...
Www.Tanakapowerequipment.Com 14 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 guide bar (fig. 3-5) before using the machine, clean the groove and oiler port (1) in the bar with the special gauge offered as an optional accessory. Oiler port (fig. 3-4) clean the chain oiler port (1) whenever pos...
Www.Tanakapowerequipment.Com 15 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 lowering depth gauges with a file 1) if you sharpen your cutters with a file holder, check and lower the depth. 2) check depth gauges every third sharpening. 3) place depth gauge tool on cutter. If depth gauge projec...
Www.Tanakapowerequipment.Com 16 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 maintenance schedule below you will find some general maintenance instructions. For further information please contact your service dealer. Daily maintenance • clean the exterior of the unit. • clean the chain oil fi...
Www.Tanakapowerequipment.Com 17 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 6. Specifications.
Www.Tanakapowerequipment.Com 18 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 declaration of conformity declaration de conformit6 dichiarazione di conformita konformitiitserkliirung declaraci6n de conformidad konformitetsdeklaration tanaka kogyo co., ltd., 3-4-29 tsudanuma, narashino, chiba, j...
Www.Tanakapowerequipment.Com 19 custsvc@tanaka-ism.Com owner’s manual ecs-3301/3351 important notice this information is for the us and canadian markets only. Only use replacement bars and chains specified by the manufacturer other equivalent.(see the chart below) bar & chain usa and bar & chain can...
