1. DL manuals
  2. TANDBERG
  3. Conference System
  4. Codec 3000 MXP
  5. Reference Manual

TANDBERG Codec 3000 MXP Reference Manual

Summary of Codec 3000 MXP

  • Page 1

    Tandberg 3000 mxp & 6000 mxp reference guide for system integrators • designed for custom integrations • 19” mountable codecs • expandability for future applications • total management via serial port, embedded web server, snmp, telnet, xml, http / https, ftp and on screen menu • best possible call ...

  • Page 2

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php thank you for choosing tandberg! The tandberg codec 3000 mxp and codec 6000 mxp have been designed to provide you with many years of safe, reliable ...

  • Page 3

    3 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators what’s new in this version? Finding the information you need there are a number of new and altered instructions available in version f7.1 configuration commands callvideosource: new in this version. The call vi...

  • Page 4

    4 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators what’s new in this version? Finding the information you need key number1: new in this version. Enables/disables the given key on the tandberg remote control. Key number2: new in this version. Enables/disables t...

  • Page 5

    5 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators key help: new in this version. Enables/disables the given key on the tandberg remote control (trc4). Key maincam: new in this version. Enables/disables the given key on the tandberg remote control (trc4). Key p...

  • Page 6

    D 13887.08 may 2008 6 tandberg 3000 mxp & 6000 mxp reference guide for system integrators finding the information you need what’s new in this version? ............................................... 3 configuration commands .............................................. 3 command instructions .........

  • Page 7

    D 13887.08 may 2008 7 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command help ............................................................48 how to get an overview of supported commands .........48 xacli – command-type – issuing a command ................... 49 issuing a com...

  • Page 8

    D 13887.08 may 2008 8 tandberg 3000 mxp & 6000 mxp reference guide for system integrators camerahalt .............................................................. 144 cameramove............................................................. 145 cameraposition ............................................

  • Page 9

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php this reference guide for system integrators and the products to which it relates contain information that is proprietary to tandberg and its licenso...

  • Page 10

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php the specifications for the products and the information in this document are subject to change at any time, without notice, by tandberg. Every effor...

  • Page 11

    D 13887.08 may 2008 11 tandberg 3000 mxp & 6000 mxp reference guide for system integrators license agreements copyright notices for third-party software on the tandberg mxp systems are listed below: the non-commercial third party code is distributed in binary • form under the terms of non-copyleft s...

  • Page 12

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php for your own protection, please read the overleaf safety instructions completely, before operating the equipment and keep this manual for future ref...

  • Page 13

    D 13887.08 may 2008 13 tandberg 3000 mxp & 6000 mxp reference guide for system integrators for your protection please read these safety instructions completely before you connect the equipment to the power source. Carefully observe all warnings, precautions and instruc- tions both on the apparatus a...

  • Page 14

    D 13887.08 may 2008 14 tandberg 3000 mxp & 6000 mxp reference guide for system integrators thank you for buying a product which contributes to a reduc- tion in pollution, and thereby helps save the environment. Our products reduce the need for travel and transport and thereby reduce pollution. Our p...

  • Page 15

    D 13887.08 may 2008 15 tandberg 3000 mxp & 6000 mxp reference guide for system integrators china rohs table environmental issues.

  • Page 16

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php what’s in the shipping box? This part of the reference guide for system integrators presents the contents of the shipping box to ease your acceptanc...

  • Page 17

    17 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators remote control batteries for remote control cd with user documentation rack mounting kit (i) rack mounting kit (ii) codec 3000 mxp user registration card power supply up to 4 mains cables (depending on region)...

  • Page 18

    18 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators what’s in the shipping box? Contents of the 6000 mxp codec shipping box remote control batteries for remote control cd with user documentation rack mounting kit (i) rack mounting kit (ii) codec 6000 mxp user r...

  • Page 19

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php interfaces and sockets – codec 3000 mxp this part of the manual provides an in-depth presentation of the rear panel sockets and interfaces of the co...

  • Page 20

    20 interfaces and sockets – codec 3000 mxp d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators audio sockets video sockets dc power socket and on/off switch network interface sockets pc card camera isdn bri net socket camera audio sockets video sockets dc power so...

  • Page 21

    21 interfaces and sockets – codec 3000 mxp d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators microphone inputs nos. 1–2 . Two balanced microphone inputs for electret microphones balanced, 24v phantom powered via xlr connectors. Use audio input no. 3 to connect t...

  • Page 22

    22 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp audio inputs 3 & 4 signal levels signal levels clipping levels nominal level input menu level setting [db] [vpp] [dbu] [dbu] 0.0 15.5 17.0 –1.0 1.5 13.0 15.5 –2.5 3.0 11...

  • Page 23

    23 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp single s-video output mini-din socket s-video input mini-din socket aux. Camera single dual composite video output rca sockets composite video input rca sockets doc. Cam...

  • Page 24

    24 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp camera socket s-video mini-din pin-out external view of socket pin 1: ground (luminance) pin 2: ground (chrominance) pin 3: luminance (y) pin 4: chrominance (c) 1 3 4 2 ...

  • Page 25

    25 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp rj-45 connector pin-out isdn bri interface. Isdn i.420 (rj-45 jack) basic rate interface s/t (2b + d), 128 kbps per isdn i/f. Use any standard bri cable to connect the c...

  • Page 26

    26 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp v35 dte → dce pin signal name direction description 1 fgnd ↔ frame gnd on equipment 11 sd(a) → send data / transmit 12 sd(b) → send data / transmit 13 rd(a) ← receive da...

  • Page 27

    27 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp ethernet lan (rj-45 jack) interface (10/100 mb). Up to 4 or 6 mbps, depending on the bandwidth op- tion installed. Use any standard ethernet cable to connect the codec t...

  • Page 28

    28 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 3000 mxp power cord socket. Accepts 12 v dc / 4.3 a power switch caution! This equipment must be earthed! Power socket & on/off switch.

  • Page 29

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php interfaces and sockets – codec 6000 mxp this part of the manual provides an in-depth presentation of the rear panel sockets and interfaces of the co...

  • Page 30

    30 interfaces and sockets – codec 6000 mxp d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators audio sockets video sockets rear panel socket– and interface groups network interface sockets power socket and on/off switch.

  • Page 31

    31 interfaces and sockets – codec 6000 mxp d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators audio sockets microphone inputs nos. 1–3 . Three balanced microphone inputs for electret microphones balanced, 24v phantom powered via xlr connectors. The phantom poweri...

  • Page 32

    32 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp audio signal levels in vpp and dbu audio inputs 4, 5 & 6 signal levels signal levels clipping levels nominal level input menu level setting [db] [vpp] [dbu] [dbu] 0.0 15...

  • Page 33

    33 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp dvi-i pin-out pin assignment pin assignment pin assignment 1 t.M.D.S. Data 2– 9 t.M.D.S. Data 1– 17 t.M.D.S. Data 0– 2 t.M.D.S. Data 2+ 10 t.M.D.S. Data 1+ 18 t.M.D.S. D...

  • Page 34

    34 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp net interface socket net interface socket . 1 × x.21 / v.35 / rs449 with 1 × rs366 call control up to 2 mbps hd d-sub 26 pin-out external view of socket 9 1 10 19 18 26 ...

  • Page 35

    35 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp network interface sockets isdn bri interface. Isdn i.420 (rj-45 jack) basic rate interface s/t (2b + d), 128 kbps per isdn i/f. Use any standard bri cable to connect the...

  • Page 36

    36 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp camera sockets s-video mini-din pin-out external view of socket pin 1: ground (luminance) pin 2: ground (chrominance) pin 3: luminance (y) pin 4: chrominance (c) 1 3 4 2...

  • Page 37

    37 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp data ports usb interface. For future use. Data ports data port 1 data port 2 pin signal name direction signal name direction 1 carrier detect, cd from dce carrier detect...

  • Page 38

    38 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators interfaces and sockets – codec 6000 mxp power socket & on/off switch power cord socket accepts 100–240 v 50–60 hz 1 a max. Power switch caution! This equipment must be earthed!.

  • Page 39

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php about the tandberg api the heart of the api is the tandberg api-engine. This is where all information is stored and processed. The api- engine can b...

  • Page 40

    40 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators introduction about the tandberg api the heart of the api is the tandberg api-engine. This is where all information is stored and processed. The api-engine can be accessed by an easy-to-use command line interfa...

  • Page 41

    41 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators example showing serial port configurations of a tandberg 6000 mxp codec, using the standard xacli formatting for configurations: xconfiguration serialport *c xconfiguration serialport 1 baudrate: 57600 *c xcon...

  • Page 42

    42 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators the rs 232 port is a 9-pin, female, d-sub connector located on the back of the tandberg mxp. The port is configured as a dce (data communications equipment). The rs 232 port is default set to 9600 baud, 8 data...

  • Page 43

    43 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators ? - user commands - about dumph221 layout-keyboard prisearch access duovideo localdn protect aim echoctrl los-duration rinfo alrtvol enable los-inhibit rnumber ansdelay encmode los-initial screensaver audioagc...

  • Page 44

    44 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – main types of commands about the tandberg api about main types of commands the xacli is divided into three main types of commands (and a fourth – see below), reflecting the information types supported ...

  • Page 45

    45 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators all configurations are organized in a hierarchic tree structure. To get an overview of accessible top-level configuration elements within a configuration-type command, type ? Or help after the configuration-ty...

  • Page 46

    46 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – configuration type operation about the tandberg api three operations can be performed on configurations: configuration help • configuration read • configuration set (write) • about configuration operat...

  • Page 47

    47 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators integer values: defines the valid range for an integer input. X = min value, y = max value. Literal values: defines the possible values for a given configuration. String values: defines that the valid input fo...

  • Page 48

    D 13887.08 may 2008 48 tandberg 3000 mxp & 6000 mxp reference guide for system integrators to get an overview of the supported command-type commands, type ? Or help after the com- mand-type command (xcommand) . Tip! To list all supported configurations with corresponding valuespace: xcommand ?? Xcom...

  • Page 49

    D 13887.08 may 2008 49 tandberg 3000 mxp & 6000 mxp reference guide for system integrators when issuing a command, the system will return a set of return values. The response will by default be on the same format as the standard xacli status format. The other supported status formats (completepath/x...

  • Page 50

    D 13887.08 may 2008 50 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – command-type commands – parameter value types about the tandberg api the system supports the following value types: integer values • literal values • string values • e164 string values (strings only co...

  • Page 51

    51 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators example xhistory ? - history - call [1..20] ok xevent ? - event - authenticationfailure messageboxresult calldisconnected packetlossdownspeed callstatisticsip [1..11] sstring callsuccessful systemactivity down...

  • Page 52

    52 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – status type commands – default formatting about the tandberg api xacli supports three different formattings for status information: default xacli formatting, provides good human • readability, compact ...

  • Page 53

    53 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators example xpreferences completepath on ok xstatus call 1 *s call 1 (status=synced, type=vtlph, protocol=h323, direction=outgoing, logtag=2): *s call 1 callrate: 768 *s call 1 remotenumber: “558458” *s call 1 mut...

  • Page 54

    54 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – status type commands – xml formatting about the tandberg api the following should be observed: to be used when the control application is using an xml • parser xml formatting is used when polling for i...

  • Page 55

    55 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – status type commands – addressing status information about the tandberg api you address status information by supplying a status-type command followed by an address-expression (xpath or tandberg simple...

  • Page 56

    56 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators exposure options should be used to limit the amount of information returned. By adding an exposure option after the address expression (xpath or tandberg simplepath), the system can be instructed to return par...

  • Page 57

    57 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – special commands – xfeedback (i) about the tandberg api the special command xfeedback lets the user register user defined xpath expressions (with pos- sible exposure options) to monitor changes in the ...

  • Page 58

    58 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – special commands – xfeedback (ii) about the tandberg api example. User wants to know when calls are connected and when calls are disconnected, without monitoring any call data changes when the call is ...

  • Page 59

    59 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators a command of great importance, xpreferences lets the user/control application individually configure the telnet/ rs 232 session in use. When parsing data sent from the co- dec using a control system it is impo...

  • Page 60

    60 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – special commands – xpreferences (ii) about the tandberg api xpreferences xmlstatusfeedback if xmlstatusfeedback is set to on, all status feedback will be returned in xml-format instead of the default x...

  • Page 61

    61 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators xacli – special commands – xpreferences (iii) about the tandberg api xpreferences completepath used to enable complete path formatting for all status-type data. If set to on, the complete path to a status elem...

  • Page 62

    62 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators as an alternative to the xacli output format, xml format is supported through the root command xgetxml. The xgetxml takes an xpath expression as parameter and the elements (or complete document) matching the e...

  • Page 63

    63 d 13887.08 may 2008 tandberg 3000 mxp & 6000 mxp reference guide for system integrators txas is a service provided by tandberg units for transmit- ting and receiving (transceiving) information encoded in xml format. The api uses http(s) as the transport mechanism and con- nects to the normal web ...

  • Page 64

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php this part of the manual describes the configuration information available. There are two types of configuration-type commands available: • xconfigur...

  • Page 65

    65 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 configuration-type commands understanding the table layout 65 tandberg 3000 mxp & 6000 mxp reference user guide for system integrators d 13887.06 november 2007 additionalcamera type: this configuration enables ...

  • Page 66

    66 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 additionalcamera type: this configuration enables improved support for some non-tandberg cameras. When using one of the cameras listed below, set the configuration accordingly. Software version f5 offers camer...

  • Page 67

    67 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 audio automute: when automute is set to on, the microphones will be turned off (muted) automatically at boot and at end of calls. When automute ...

  • Page 68

    68 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 audio stereo: turns stereo i/o mode on or off. Example: xconfiguration audio stereo: on stereo settings output response codec 3000 mxp output re...

  • Page 69

    69 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 audio inputs line [1..X] 6000 mxp: x=3 3000 mxp: x=2 for 3000 mxp, line 1: mode: turns the input on or off. If set to microphone, the audio on t...

  • Page 70

    70 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 audio feedback mode: this configuration alters how fast the audio feedback will react. Set to normal to allow for some distortion before the fee...

  • Page 71

    71 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 callvideosource: the call video source is the default call video source you would prefer to use in a call.. Example: xconfiguration callvideosou...

  • Page 72

    72 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 camera [1..13] gamma mode: auto is the default and the recommended setting. However, in severe light conditions, you may switch mode to manual a...

  • Page 73

    73 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 cameraswupgrade: if set to auto the camera software will be automatically upgraded by the codec. If set to off, camera software upgrade must be ...

  • Page 74

    74 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 conference sip uri: the sip uri is the address to use when calling the system using sip. Example: xconfiguration conference sip uri: mysip_uri c...

  • Page 75

    75 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 conference aac-ld-128-threshold: the system will not transmit aac-ld-128 unless the call rate is equal to or above the specified threshold. Exam...

  • Page 76

    76 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 conference downspeed: determines whether or not to allow downspeeding. Example: xconfiguration conference downspeed: on conference fallbacktotel...

  • Page 77

    77 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 conference ipdualstreamrate: when setting up an ip call the bandwidth can be controlled by the user. The ipdualstreamrate is expressed in percen...

  • Page 78

    78 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 directory calllog: enable/disable call logs for placed calls, missed calls and received calls in the phone book. Example: xconfiguration directo...

  • Page 79

    79 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 externalmanager protocol: enables/disables secure management. Example: xconfiguration externalmanager protocol: http externalnetwork clocking: d...

  • Page 80

    80 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 externalservices protocol: enables/disables secure management. Example: xconfiguration externalservices protocol: http fecc mode: sets whether o...

  • Page 81

    81 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 g703 interface maxchannels: indicates the maximum number of channels the codec is allowed to use on the e1/t1 interface. When e1 is selected, ma...

  • Page 82

    82 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 h323gatekeeper avaya annexh: set annexh to on to enable avaya strongest level of encryption (h.235.5 with avaya extensions). When set to off, th...

  • Page 83

    83 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 h323gatekeeper authentication password: please see above. Note! The password will not be listed when polling. Example: xconfiguration h323gateke...

  • Page 84

    84 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 ieee802.1x mode: enables/disables 802.1x authentication example: xconfiguration ieee802.1x mode: on the system may be connected to an ieee 802.1...

  • Page 85

    85 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 imux custom bw64r suffix: defines the suffix to be used with the rs366 custom imux at this restricted bandwidth. Example: xconfiguration imux cu...

  • Page 86

    86 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 imux custom bw256 suffix: defines the suffix to be used with the rs366 custom imux at this bandwidth. Example: xconfiguration imux custom bw256 ...

  • Page 87

    87 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 imux custom bw384r suffix: defines the suffix to be used with the rs366 custom imux at this restricted bandwidth. Example: xconfiguration imux c...

  • Page 88

    88 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 imux custom bw1152 suffix: defines the suffix to be used with the rs366 custom imux at this bandwidth. Example: xconfiguration imux custom bw115...

  • Page 89

    89 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 imux custom bw1920r suffix: defines the suffix to be used with the rs366 custom imux at this restricted bandwidth. Example: xconfiguration imux ...

  • Page 90

    90 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 ipmedia maxvideotxrate: the maxvideotxrate (kbps) defines the desired maximum transmitted call rate for ip calls. This is to be able to limit th...

  • Page 91

    91 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 isdn paralleldial: when set to on, channels will be dialed and connected in parallel when setting up a bonding call. When set to off, channels w...

  • Page 92

    92 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 isdn pri nsftelephony number: defines what service facility to use for telephony if the nsftelephony mode is set to on. Example: xconfiguration ...

  • Page 93

    93 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 isdn pri l2windowsize: max. No. Of outstanding iframes (isdn layer 2) example: xconfiguration isdn pri l2windowsize: isdn pri interface maxchann...

  • Page 94

    94 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 isdn bri alert: if set to on, the system will respond with an alert message to all incoming setup messages. If set to off (default) the system w...

  • Page 95

    95 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 key number2: enable or disable the given key on the tandberg remote control, and using configuration instead of commands. Example: xconfiguratio...

  • Page 96

    96 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 key connect: enable or disable the given key (green call key) on the tandberg remote control, and using configuration instead of commands. Examp...

  • Page 97

    97 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 key micoff: enable or disable the given key (yellow mic off key) on the tandberg remote control, and using configuration instead of commands. Ex...

  • Page 98

    98 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 key farend: enable or disable the given key on the tandberg remote control (trc4), and using configuration instead of commands. Example: xconfig...

  • Page 99

    99 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 kiosk languagemenu english: enables (on) or diables (off) language menu in english. Example: xconfiguration kiosk languagemenu english: on kiosk...

  • Page 100

    100 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 kiosk oneclickconnect: if turned on, you can make a call with a single click on the green call button on the remote control. The system will ca...

  • Page 101

    101 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 los initial: specifies the maximum number of seconds to wait for h.221 frame alignment during call setup before asserting the los signal. Examp...

  • Page 102

    102 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 netprofile [1..7] callprefix: a call prefix can be added to each netprofile. If a call prefix is added, this prefix will automatically be added...

  • Page 103

    103 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 osd mode: enables/disables the on screen display (osd). If set to off there will be no graphics displayed on the monitors. Example: xconfigurat...

  • Page 104

    104 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 osd menu inputeditor language: when the input editor language is set to chinese, korean or japanese the user will be able to enter chinese/kore...

  • Page 105

    105 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 osd icon warning: enables/disables the warning icon. Example: xconfiguration osd icon warning: on osd mcustatusline mode: if set to on the mult...

  • Page 106

    106 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 preset [1..15] name: defines the preset name. Example: xconfiguration preset 1 name: anyname presets should never be modified manually, except ...

  • Page 107

    107 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 preset [1..15] camera brightness level: interpretation of the settings chosen will depend on the camera type you use. If in doubt, consult your...

  • Page 108

    108 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 qos precedence telephony audio: example: xconfiguration qos precedence telephony audio: auto configures the different quality of service (qos) ...

  • Page 109

    109 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 qos precedence videotelephony data: example: xconfiguration qos precedence videotelephony data: auto configures the different quality of servic...

  • Page 110

    110 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 remoteswupgrade mode: if set to on, software can be upgraded from a far end system. Example: xconfiguration remoteswupgrade mode: on remoteswup...

  • Page 111

    111 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 serialport [1] direct buffer: note! Port 1 only specifies the size of the buffer used in direct mode. Try setting this value higher if you need...

  • Page 112

    112 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 sip server type: enables sip extensions and special behaviour for a sip server vendor. Auto: should be used when registering to standard sip se...

  • Page 113

    113 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 snmp systemcontact: defines the snmp system contact. Example: xconfiguration snmp systemcontact: snmp systemlocation: defines the snmp system l...

  • Page 114

    114 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 streaming streaming port: specifies the port, which the codec shall stream to. If several codec’s are streaming to the same ip-address, differe...

  • Page 115

    115 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 strictpassword — systemunit strictpassword: if set to on, the system requires that the systemunit password is minimum 8 characters long and tha...

  • Page 116

    116 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 systemunit cont... — time systemunit displayname: the display name part of the sip address (uri) example: xconfiguration systemunit displayname...

  • Page 117

    117 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 time cont... — video time timeformat: specifies the time format to use. Example: xconfiguration time timeformat: 24h time daylightsavings: enab...

  • Page 118

    118 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 video cont... Video inputs source [1..6] quality: when encoding and transmitting video there will be a tradeoff between high resolution and hig...

  • Page 119

    119 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 video cont... Video outputs formatpcwidescreen: note! Applies to wide screen monitors only) pc picture format setting only takes effect when tv...

  • Page 120

    120 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 video cont... Video outputs letterbox: this setting will only take effect on video displayed in full screen. When set to on, the system will us...

  • Page 121

    121 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration-type commands – xconfiguration / configuration.Xml d 13887.08 may 2008 video cont... — vnc video outputs dvi [1..X] x = 2 on 6000 mxp x = 1 on 3000 mxp mode: turns on/off the dvi outputs. Note! We recommend that yo...

  • Page 122

    122 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 localentry [1..200] name: the local entry’s name. Example: xdirectory localentry 26 name: john doe defines entries stored locally on the codec. Note! To add new entries and remove existing entries, the comman...

  • Page 123

    123 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 globalentry [1..400] name: the global entry’s name. Example: xdirectory globalentry 26 name: john doe defines global entries to be stored locally on the codec. Global entries should be used by an centralized ...

  • Page 124

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php you may reset configuration settings to their default values. Whether a specific configuration command will be affected by the reset command depends...

  • Page 125

    125 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 configuration storage levels understanding the table layout 85 tandberg 3000 mxp & 6000 mxp reference user guide for system integrators configuration storage levels d 13887.X3 august 2006 storage level: config...

  • Page 126

    126 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 3 additionalcamera type: 1 alertspeaker mode: 1 alerttone telephony: 1 alerttone videotelephony: 1 alerttone volume: 1 allowlatency: 1 audio agc aux:...

  • Page 127

    127 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 audio microphones mode: 1 audio outputs line [1..3] level: 1 audio outputs line [1..3] mode: 1 audio outputs line 1 type: 1 audio stereo: 1 audio s...

  • Page 128

    128 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 camera [1..13] whitebalance mode: 1 cameradvi mode: 1 camerasleep mode: 1 cameraswupgrade: 1 cameratracking speed: 2 conference aac-ld: 2 conferenc...

  • Page 129

    129 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 2 conference h264: 2 conference h264rcdo: 3 conference h323alias e164: 3 conference h323alias id: 1 conference h331: 2 conference ipdualstreamrate 1 ...

  • Page 130

    130 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 3 externalnetwork dtrpulse: 3 externalservices address: 3 externalservices mode: 3 externalservices path: 1 fecc mode: 1 feedbackfilter call: 1 feedb...

  • Page 131

    131 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 http mode: 1 https mode: 1 idreport h323: 3 ieee802.1x anonymousidentity: 3 ieee802.1x eap-md5: 3 ieee802.1x eap-peap: 3 ieee802.1x eap-ttls: 3 iee...

  • Page 132

    132 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 ircontrol numberkeymode: 1 ircontrol mode: 3 isdn bri alert: 3 isdn bri autoactivation: 3 isdn bri chanid: 3 isdn bri interface [1..6] directorynum...

  • Page 133

    133 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 3 isdn pri l2windowsize: 3 isdn pri nsftelephony mode: 3 isdn pri nsftelephony number: 3 isdn pri nsfvideotelephony mode: 3 isdn pri nsfvideotelephon...

  • Page 134

    134 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 logo: 1 los duration exponent: 1 los duration offset: 1 los inhibit: 1 los initial: 1 los polarity: 1 los retry: 1 mainvideosource: 3 mcu multisite...

  • Page 135

    135 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 osd icon badnetwork: 1 osd icon encryption: 1 osd icon micoff: 1 osd icon onair: 1 osd icon telephone: 1 osd icon volumeoff: 2 osd mcustatusline mo...

  • Page 136

    136 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 preset [1..15] camera brightness level: 1 preset [1..15] camera brightness mode: 1 preset [1..15] camera focus: 1 preset [1..15] camera pan: 1 pres...

  • Page 137

    137 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 rtp mtu: 1 rtp ports: 1 screensaver delay: 1 screensaver mode: 1 selfviewonstartup: 3 serialport [1..2] baudrate: 3 serialport [1..2] databits: 3 s...

  • Page 138

    138 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 startupvideosource: 1 stillimagesource: 3 streaming address: 3 streaming allowremotestart: 3 streaming announcements: 3 streaming hops: 3 streaming...

  • Page 139

    139 tandberg 3000 mxp & 6000 mxp reference guide for system integrators configuration storage levels d 13887.08 may 2008 storage level: configuration: 1 video inputs source [1..6] name: 2 video inputs source [1..6] quality: 1 video outputs allowhd720p: 1 video outputs allowwxga: 1 video outputs dvi ...

  • Page 140

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php this part of the manual describes the command information available. Command information tables.

  • Page 141

    141 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 command information understanding the table layout 3 tandberg 3000 mxp & 6000 mxp reference user guide for system integrators status information d 13887.X3 august 2006 required parameters are identified by an ...

  • Page 142

    142 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – see the column exampl...

  • Page 143

    143 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 144

    144 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 145

    145 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 146

    146 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 147

    147 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 148

    148 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 149

    149 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 150

    150 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 151

    151 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 152

    152 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 153

    153 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 154

    154 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 155

    155 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 156

    156 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 157

    157 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 158

    158 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 159

    159 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 160

    160 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 161

    161 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 162

    162 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 163

    163 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 164

    164 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command information d 13887.08 may 2008 required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – s...

  • Page 165

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php this part of the manual describes the status information available. There are three types of status information available: • xstatus / status.Xml • ...

  • Page 166

    166 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 understanding the table layout 20 tandberg 3000 mxp & 6000 mxp reference user guide for system integrators status information d 13887.X3 august 2006 conference (type = idle / pointtopoint / pointtomultisite /...

  • Page 167

    167 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences audio audiomodule: none / nami / namii / digital nam / mdnam inputs m...

  • Page 168

    168 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences bri [1..6] (ready= unknown ...

  • Page 169

    169 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences example: *s bri 1 (ready=tr...

  • Page 170

    170 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences call [1..10] (status= disco...

  • Page 171

    171 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = inactive the fo...

  • Page 172

    172 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = dialing / alert...

  • Page 173

    173 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences protocol: g711 / g722 / g72...

  • Page 174

    174 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences example (see previous page ...

  • Page 175

    175 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = dialing / alert...

  • Page 176

    176 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences packetsdropped*: appears wi...

  • Page 177

    177 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = dialing / alert...

  • Page 178

    178 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = active the foll...

  • Page 179

    179 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = on the followin...

  • Page 180

    180 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences example: *s call 1 (status=...

  • Page 181

    181 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences totalpackets: 817 packetlos...

  • Page 182

    182 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences camera [1..13] (connected =...

  • Page 183

    183 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences cameraswupgrade (status = n...

  • Page 184

    184 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences cameratracking (status = on...

  • Page 185

    185 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences conference (type = idle / p...

  • Page 186

    186 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences if status = on the followin...

  • Page 187

    187 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences example: *s conference (typ...

  • Page 188

    188 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences callref: 0..11 floor: none ...

  • Page 189

    189 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences view: mcuid: 1.. Terminalid...

  • Page 190

    190 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences continued from the previous...

  • Page 191

    191 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences ethernet: macaddress: speed...

  • Page 192

    192 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences externalmanager: address: p...

  • Page 193

    193 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences externalnetwork (ready = tr...

  • Page 194

    194 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences farendinformation : fecc (s...

  • Page 195

    195 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences example: *s farendinformati...

  • Page 196

    196 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences feedback [1..3] (status = o...

  • Page 197

    197 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences g703 (ready = true / false ...

  • Page 198

    198 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences h323gatekeeper (status = re...

  • Page 199

    199 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences ip address: subnetmask: gat...

  • Page 200

    200 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences ntp: address: example: *s n...

  • Page 201

    201 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences pri (ready = true / false )...

  • Page 202

    202 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences example: *s pri (ready=true...

  • Page 203

    203 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences channel 10 (type=bchannel, ...

  • Page 204

    204 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences remoteswupgrade (status = n...

  • Page 205

    205 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences screensaver (status = on / ...

  • Page 206

    206 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences sip server (status = inacti...

  • Page 207

    207 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences softwareupgrade (status = n...

  • Page 208

    208 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences switch (connected = true / ...

  • Page 209

    209 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences systemunit: producttype: pr...

  • Page 210

    210 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences dataports: audioinputs: set...

  • Page 211

    211 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences virtualmonitor virtualmonit...

  • Page 212

    212 tandberg 3000 mxp & 6000 mxp reference guide for system integrators status information – xstatus /xstatus.Xml d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences warning warning [1..10] (st...

  • Page 213

    213 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences call [1..20] type = na / tlph / vtlph protocol = na / isdn / h320 / h...

  • Page 214

    214 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences the disconnectcause may show as a result of the xhistory call command...

  • Page 215

    215 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences call - disconnectcausevalue (1:3) the disconnectcausevalue may show a...

  • Page 216

    216 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences cause no. 31 - normal, unspecified this cause is used to report a nor...

  • Page 217

    217 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences cause no. 81 - invalid call reference value this cause indicates that...

  • Page 218

    218 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences authenticationfailure service: remoteipaddress: uptime: example: poll...

  • Page 219

    219 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences calldisconnected: callref: logtag: example: polling: *e calldisconnec...

  • Page 220

    220 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences callsuccessful: callref: logtag: protocol: direction: callrate: remot...

  • Page 221

    221 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences downspeedingfinished: callref: logtag: rate: example: polling: *e dow...

  • Page 222

    222 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences messageboxresult: button: example: polling: *e messageboxresult: butt...

  • Page 223

    223 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences packetlossdownspeed: callref: logtag: example: polling: *e packetloss...

  • Page 224

    224 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences sstring: example: polling: *e sstring: / *e/end feedback: *e sstring:...

  • Page 225

    225 tandberg 3000 mxp & 6000 mxp reference guide for system integrators d 13887.08 may 2008 status information followed by a * will not be shown unless detailed level has been set to 2 – see xacli – special commands – xpreferences systemactivity: service: remoteipaddress: uptime: description: exampl...

  • Page 226

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php controlling external cameras assume you have your cameras connected to an external control system, and that you want to be able to control these cam...

  • Page 227

    D 13887.08 may 2008 227 tandberg 3000 mxp & 6000 mxp reference guide for system integrators a ssume you have your cameras connected to an external control system, and that you want to be able to control these cameras using the tandberg remote or from the remote site using fecc (far end camera contro...

  • Page 228

    D 13887.08 may 2008 228 tandberg 3000 mxp & 6000 mxp reference guide for system integrators the tandberg wave ii camera uses a rs-232 control interface that resembles the sony visca protocol. Rs232 parameters the communication parameters for the rs232 interface must be set to: 9600 bits per second •...

  • Page 229

    D 13887.08 may 2008 229 tandberg 3000 mxp & 6000 mxp reference guide for system integrators commands controlling external cameras > interfacing to the tandberg wave ii camera command message comment autofocus on 81 01 04 38 02 ff manual focus on 81 01 04 38 03 ff focus in start 81 01 04 08 02 ff foc...

  • Page 230

    D 13887.08 may 2008 230 tandberg 3000 mxp & 6000 mxp reference guide for system integrators command message comment bright exp on 81 01 04 3e 02 ff bright exp off 81 01 04 3e 03 ff bright exp inc 81 01 04 0e 02 ff bright exp dec 81 01 04 0e 03 ff bright exp reset 81 01 04 0e 00 ff wb auto 81 01 04 3...

  • Page 231

    D 13887.08 may 2008 231 tandberg 3000 mxp & 6000 mxp reference guide for system integrators this document describes how to communicate with the precision hd camera using the visca protocol. The wave 2 interface was specified on the previous pages. The precision hd camera uses the same interface, wit...

  • Page 232

    We recommend that you check out the tandberg web site regularly for updated versions of this manual: http://www.Tandberg.Com/support/ documentation.Php tandberg video switch the tandberg video switch (tvs) is a rack-mountable hardware option for tandberg 6000 mxp and 3000 mxp codecs that delivers th...

  • Page 233

    D 13887.08 may 2008 233 tandberg 3000 mxp & 6000 mxp reference guide for system integrators tandberg video switch unpacking the video switch 1 unpack the unit. 2 mount the rack ears and/or rubber feet and mount it in the rack, if applicable. Put the video switch power supply here when rack mounting....

  • Page 234

    D 13887.08 may 2008 234 tandberg 3000 mxp & 6000 mxp reference guide for system integrators connecting the video switch (i) tandberg video switch 3 audio out data net pc card 1. Single 2. Single video out video in 3. Dual 2. Aux 3. Doc 4. Vcr vcr ethernet pc dvi-i in dvi-i out 1 2 4 audio in 1 mic.1...

  • Page 235

    D 13887.08 may 2008 235 tandberg 3000 mxp & 6000 mxp reference guide for system integrators tandberg video switch connecting the video switch (ii) 4 this diagram shows the additional connections needed to expand from using up to four tandberg precision hd cameras (see previous page) to also include ...

  • Page 236

    D 13887.08 may 2008 236 tandberg 3000 mxp & 6000 mxp reference guide for system integrators the codec must be equipped with software version f6.1 or higher to support the use of the video switch. Tandberg video switch connecting the video switch (iii) 5 this diagram shows the connections needed to u...

  • Page 237

    D 13887.08 may 2008 237 tandberg 3000 mxp & 6000 mxp reference guide for system integrators tandberg video switch installation of the video switch basic functionality physical inputs refer to explicit codec input and explicit switch input. These can only be controlled from the command interface. The...

  • Page 238

    D 13887.08 may 2008 238 tandberg 3000 mxp & 6000 mxp reference guide for system integrators tandberg video switch communicating with the video switch visca standard commands command set command packet comments cam_if_clear 8x 01 00 01 ff clear command buffer. Stop any current operation in progress. ...

  • Page 239

    D 13887.08 may 2008 239 tandberg 3000 mxp & 6000 mxp reference guide for system integrators tandberg video switch communicating with the video switch configuration commands messages starting with 8x-01-40- are configuration commands. Command command packet comments sw_port_0_cfg 8x 01 40 00 ... Ff c...

  • Page 240

    D 13887.08 may 2008 240 tandberg 3000 mxp & 6000 mxp reference guide for system integrators disclaimer and safety instructions tandberg video switch disclaimer the information in this document is furnished for informational purposes only, is subject to change without prior notice, and should not be ...

  • Page 241

    D 13887.08 may 2008 241 tandberg 3000 mxp & 6000 mxp reference guide for system integrators product declaration tandberg video switch a 㑻ໄᯢ( a class product declaration) ᴀѻકЎ a 㑻 iteˈ೼݊Փ⫼䇈ᯢ,䫁⠠ㄝᰒ㨫ԡ㕂ЁᏆࣙ৿བϟݙ ᆍⱘໄᯢ (we declare here that the subject product is a class ite product, and the following statem...

  • Page 242

    Philip pedersens vei 22, 1366 lysaker, norway telephone: +47 67 125 125 fax: +47 67 125 234 video: +47 67 117 777 e-mail: tandberg@tandberg.Com.