1. DL manuals
  2. TANDBERG
  3. Media Converter
  4. E5714 DSNG Voyager
  5. Instruction Manual

TANDBERG E5714 DSNG Voyager Instruction Manual

Other manuals for E5714 DSNG Voyager: Reference Manual
Manual is about: DSNG, DENG Voyager Encoder Build Version 2.1.0 to 3.1.0 (and later) M2/VOY/E5714, M2/VOY/E5740-xxx, M2/VOY/E5715, M2/VOY/E5750 and Options

Summary of E5714 DSNG Voyager

  • Page 1

    St.Tm.E10076.3 issue 3 english (uk) instruction manual e5714/e5740-xxx dsng, e5715/e5750 deng voyager encoder build version 2.1.0 to 3.1.0 (and later) m2/voy/e5714, m2/voy/e5740-xxx, m2/voy/e5715, m2/voy/e5750 and options.

  • Page 2

    Preliminary pages page ii instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 issue 3 first published in 2002 by: t andberg t elevision l td r egistered a ddress : u nit 2 s trategic p ark , c omines w ay , h edge e nd , s outhampton , h ampshire , so30 4da register...

  • Page 3: List of Contents

    Preliminary pages instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page iii st.Tm.E10076.3 list of contents chapter 1: introduction to the basic encoder gives a general description of the equipment and its main features and functions. Identifies the controls, indicators and con...

  • Page 4: About This Manual

    Preliminary pages page iv instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 about this manual this manual provides instructions and information for the installation, operation of the encoder. This manual should be kept in a safe place for reference for the life of...

  • Page 5: Acknowledgements

    Preliminary pages instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page v st.Tm.E10076.3 acknowledgements general all best endeavours have been made to acknowledge registered trademarks and trademarks used throughout this manual. Any notified omissions will be rectified in the ...

  • Page 6: Heed Warnings

    Preliminary pages page vi instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 warnings, cautions and notes heed warnings all warnings on the product and in the operating instructions should be adhered to. The manufacturer can not be held responsible for injuries or ...

  • Page 7: Contact Information

    Preliminary pages instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page vii st.Tm.E10076.3 contact information tandberg television customer services support services our primary objective is to provide first class customer care that is tailored to your specific business and ope...

  • Page 8: Technical Training

    Preliminary pages page viii instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 technical training training courses tandberg television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies. T...

  • Page 9: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-1 st.Tm.E10076.3 chapter 1 1. Introduction to the basic encoder contents 1.1 scope of this manual................................................. 1-3 1.1.1 who should use this manual ...................... 1-3 1.1.2 build...

  • Page 10

    Introduction to the basic encoder page 1-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 1u chassis..................................................1-18 2u chassis..................................................1-18 1.4.5 boards in the basic encoder...........

  • Page 11: 1.1

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-3 st.Tm.E10076.3 1.1 scope of this manual 1.1.1 who should use this manual this manual is written for operators/users of the 1u and 2u voyager encoders to assist in the installation, opera...

  • Page 12

    Introduction to the basic encoder page 1-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 there are vacant slots for option modules; one in the e5714 and e5715; three in the e5760; four in the e5740; five in the e5750. These slots can be occupied by any combina...

  • Page 13: 1.2

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-5 st.Tm.E10076.3 information label there are two information labels which identify the configuration of the unit. Figure 1.3 and figure 1.4 are typical examples. Figure 1.3: information la...

  • Page 14: 1.2.2

    Introduction to the basic encoder page 1-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the e5714 and e5740 contain the same high performance encoder. The e5714 is a 1u chassis housing the encoder and a qpsk satellite modulator. The e5740 is a 2u chassis hous...

  • Page 15: 1.2.3

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-7 st.Tm.E10076.3 e5714 the satellite modulator within the e5714 supports qpsk modulation in accordance with en 300 421 (dvb-s). It provides a main and monitoring if output. The if frequenc...

  • Page 16: 1.3

    Introduction to the basic encoder page 1-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 1.3 summary of features 1.3.1 video encoding mpeg-2 encoding the encoder processes a broadcast-standard video signal into a compressed encoded bit-stream in accordance wit...

  • Page 17

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-9 st.Tm.E10076.3 · fully exhaustive motion estimation · an internal frame synchroniser (see internal frame synchroniser on page 1-10) · support for active format descriptor (afd) (see chap...

  • Page 18: 1.3.2

    Introduction to the basic encoder page 1-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 1.4: video coding resolutions 625 line modes 525 line modes 720 pixels x 576 lines 720 pixels x 480 lines 704 pixels x 576 lines 704 pixels x 480 lines 640 pixels x...

  • Page 19

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-11 st.Tm.E10076.3 audio inputs the standard audio input is: · audio in – 15-way male d-type - software selectable balanced analogue or digital aes/ebu, with aes/ebu on left only. A break-o...

  • Page 20

    Introduction to the basic encoder page 1-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 test tones the equipment can be configured to generate a test tone for alignment purposes. Refer to annex b, technical specification for level and frequency. Audio variab...

  • Page 21: 1.3.3

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-13 st.Tm.E10076.3 table 1.6: dolby digital audio encoding bit-rates bit-rate (kbit/s) single channel mono (1/0) dual channel stereo (2/0) 56 3 - 64 3 - 80 3 - 96 3 3 112 3 3 128 3 3 160 3 ...

  • Page 22: 1.3.4

    Introduction to the basic encoder page 1-14 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 vbi user data closed caption data, together with other formats such as vitc and afd, can be transmitted in the user data field of the video or relevant part of the video ...

  • Page 23: 1.3.5

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-15 st.Tm.E10076.3 1.3.5 outputs three asi-c (copper) outputs supplying a dvb and atsc 18 mpeg-2 transport stream are supplied as standard. 1.3.6 if modulation e5714 the internal satellite ...

  • Page 24: 1.4

    Introduction to the basic encoder page 1-16 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 1.4 guided tour 1.4.1 enclosure there are two sizes of enclosure, 1u and 2u versions. The enclosure is used as a stand-alone unit. All inputs and outputs are via rear pan...

  • Page 25: 1.4.4

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-17 st.Tm.E10076.3 power supply stand-by switch the use of this switch puts the encoder into stand-by mode. It powers down the supply rails of the display and internal circuits within the u...

  • Page 26

    Introduction to the basic encoder page 1-18 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 1u chassis figure 1.10: e5714 (1u) rear panel component parts and connectors figure 1.11: e5715 (1u) rear panel component parts and connectors 2u chassis figure 1.12: e57...

  • Page 27: 1.4.5

    Introduction to the basic encoder instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 1-19 st.Tm.E10076.3 figure 1.13: e5750 (2u) rear panel component parts and connectors 1.4.5 boards in the basic encoder the basic encoder contains two boards mounted horizontally in the encl...

  • Page 28

    Introduction to the basic encoder page 1-20 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 29: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-1 st.Tm.E10076.3 chapter 2 2. Installing the equipment contents 2.1 introduction ............................................................... 2-3 2.1.1 read this first! ............................................ 2-3 2...

  • Page 30

    Installing the equipment page 2-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 if out 2 ......................................................2-21 2.7 powering up/down..................................................2-21 2.7.1 before powering up................

  • Page 31: 2.1

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-3 st.Tm.E10076.3 2.1 introduction 2.1.1 read this first! The encoder must be handled carefully and thoughtfully to prevent safety hazards and damage. It is usually supplied as part of a system inst...

  • Page 32: 2.2

    Installing the equipment page 2-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 fcc this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reas...

  • Page 33: 2.3.2

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-5 st.Tm.E10076.3 figure 2.1: fitting the encoder into a rack 2.3.2 cable routing power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or ...

  • Page 34

    Installing the equipment page 2-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the unit is designed for stationary or fixed use only. Ensure it is firmly and safely located and has an adequate through-flow of air. Allow at least 50 mm free air-space at each s...

  • Page 35: 2.4

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-7 st.Tm.E10076.3 2.4 ac mains operating voltage and earthing 2.4.1 ac power supply caution... This product should be operated only from the type of power source indicated on the marking label. If y...

  • Page 36: 2.5

    Installing the equipment page 2-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the unit has a technical earth terminal (marked with ) located at the rear panel. Its use is recommended. This is not a protective earth for electric shock protection. The terminal...

  • Page 37: 2.5.2

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-9 st.Tm.E10076.3 the internal dc power supply module used in this equipment is designed for use on dc supplies ranging from 12 to 36 volts dc. (see annex b, technical specification for a full power...

  • Page 38: 2.6

    Installing the equipment page 2-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 warning … the power-supply cable should be routed so that it is not likely to be damaged or trapped by items placed upon or against it, paying particular attention to the cable at...

  • Page 39

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-11 st.Tm.E10076.3 figure 2.4: e5715 (1u) rear panel component parts and connectors figure 2.5: e5740-if (2u) rear panel component parts and connectors figure 2.6: e5740-l-band (2u) rear panel compo...

  • Page 40: 2.6.2

    Installing the equipment page 2-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 2.7: e5750 (2u) rear panel component parts and connectors 2.6.2 connecting up the basic encoder once the unit has been installed in its intended operating position, it is r...

  • Page 41: 2.6.3

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-13 st.Tm.E10076.3 do not move or install equipment whilst it is still attached to the mains supply. Ensure esd precautions are observed whilst interconnecting equipment. Note… see chapter 3 for inf...

  • Page 42: 2.6.6

    Installing the equipment page 2-14 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 2.4: h sync connector pin signal centre video input screen ground impedance 75 w comp video a 75 w bnc connector provides a high quality analogue video input to the unit. Se...

  • Page 43: 2.6.7

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-15 st.Tm.E10076.3 table 2.6: audio in connector pin signal pin signal analogue digital analogue digital 1 left channel a (+) aes/ebu (a) (+) 9 left channel a (-) aes/ebu (a) (-) 2 not connected 10 ...

  • Page 44

    Installing the equipment page 2-16 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 ethernet #1 and #2 an 8-way, rj-45 connector provides a 10baset ethernet interface for communications with the mem for control and monitoring. The encoder has a single switched et...

  • Page 45: 2.6.9

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-17 st.Tm.E10076.3 remote control a 9-way, d-type male connector provides an rs-232/rs-485 port for remote control of the encoder (see serial protocol option). This connector is wired as a dte. Tabl...

  • Page 46

    Installing the equipment page 2-18 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 notes… 1. Signal names are with respect to a dte in accordance with the rs-232 specification. 2. Remote pin numbers only apply to a 9-way d-type connector. 3. 25-way connectors ha...

  • Page 47

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-19 st.Tm.E10076.3 2.6.10 satellite modulator if output (e5714 and e5740 if) if out (main) 75 w bnc socket provides an if output. Table 2.13: if out connector (main) item specification connector typ...

  • Page 48

    Installing the equipment page 2-20 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 l-band out (main) 50 w sma female connector provides the main l-band output. This can also provide +24 v dc at up to 500 ma to power an up-converter. Table 2.16: l-band out (main)...

  • Page 49: 2.7

    Installing the equipment instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 2-21 st.Tm.E10076.3 if out 2 a 75 w bnc socket provides a 70 mhz if output used for monitoring. Table 2.18: if out 2 connector item specification connector type bnc 75 w female type analogue connecto...

  • Page 50: 2.8

    Installing the equipment page 2-22 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 2.8 setting the encoder ip address 2.8.1 methods of changing the encoder ip address if, for any reason, the ip address has to be changed, this can be achieved via the front panel ...

  • Page 51: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-1 st.Tm.E10076.3 chapter 3 3. Options and upgrades contents 3.1 what’s available........................................................ 3-3 3.1.1 option functions........................................... 3-3 3.1.2 limit...

  • Page 52

    Options and upgrades page 3-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 3.10 16qam demodulator (m2/eom2/satdemod)......3-24 3.10.1 overview .....................................................3-24 3.10.2 assembly..............................................

  • Page 53: 3.1

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-3 st.Tm.E10076.3 3.1 what’s available 3.1.1 option functions the basic encoder functionality can be enhanced with the inclusion of options, hardware and software. Each hardware option module consists o...

  • Page 54: 3.1.2

    Options and upgrades page 3-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 3.2: software options marketing code name used in 1u used in 2u m2/eso2/nr noise reduction 4 4 m2/eso2/pu performance upgrade/bit-rate 4 4 m2/eso2/vbr vbr licence 4 4 m2/eso2/422...

  • Page 55: 3.2

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-5 st.Tm.E10076.3 3.2 bit-rate limits with reflex licence and/or performance upgrade a user with a reflex licence (m2/eso2/vbr) but no performance upgrade (m2/eso2/pu) will be able to get lower bit-rate...

  • Page 56: 3.4

    Options and upgrades page 3-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 biss scrambling (when fitted) is enabled and controlled via the setup/mux menu (see chapter 4, operating the equipment locally, section 4.12.12). 3.4 additional audio and linear pcm op...

  • Page 57: 3.4.2

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-7 st.Tm.E10076.3 3.4.2 assembly rear panel note… the aes/ebu reference signal is provided for backwards compatibility only. When using e57xx encoders use the reference signal provided by the base board...

  • Page 58

    Options and upgrades page 3-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 3.4: audio in connector pin signal pin signal analogue digital analogue digital 1 left channel a (+) aes/ebu (a) (+) 9 left channel a (-) aes/ebu (a) (-) 2 not connected 10 right...

  • Page 59: 3.5

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-9 st.Tm.E10076.3 3.5 rs-232 and rs-422 data input option (m2/eom2/dat) 3.5.1 overview note… the data input option does not report errors back to the host, thus no alarms are raised by the encoder. The ...

  • Page 60

    Options and upgrades page 3-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 async connector a 9-way, d-type female connector provides an rs-232 asynchronous, serial communications data input interface. Table 3.5: rs-232 data connector (option module) - asynch...

  • Page 61

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-11 st.Tm.E10076.3 table 3.6: rs-422 data connector (option module) - synchronous remote (dte) data module rs-422 (dce) signal name signal direction pin signal name 1 not connected transmit data a 2 tra...

  • Page 62: 3.6

    Options and upgrades page 3-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 3.6 remux option (m2/eom2/remux) 3.6.1 overview note… the m2/eom2/remux remux option module is supported by build version 2.2.0 and later. The remux option module is capable of accept...

  • Page 63: 3.6.3

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-13 st.Tm.E10076.3 dvb asi in 1, 2 and 3 connectors a 75 w bnc connector provides an input to the unit. Table 3.7: dvb asi in connector pin signal centre signal screen ground note… when connecting the i...

  • Page 64

    Options and upgrades page 3-14 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 3.4: block diagram – one stage of remultiplexing similarly, if two stages of remultiplexing are introduced, thirteen encoders can be combined, providing up to thirteen services...

  • Page 65: 3.6.4

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-15 st.Tm.E10076.3 3.6.4 function of remultiplexer it is the function of the remultiplexer to combine the locally generated host services with the externally supplied input services, connected via asi i...

  • Page 66: 3.6.5

    Options and upgrades page 3-16 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 3.6.5 using the remultiplexer set the output bit-rate to the required value in the setup/mux menu. Connect transport streams that are to be combined (remultiplexed) with the host enco...

  • Page 67: 3.6.8

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-17 st.Tm.E10076.3 the easiest way to configure the bit-rates to avoid overflow, is as follows: 1. Divide the 188 byte output bit-rate of the primary (master) remultiplexing unit, (this can be found in ...

  • Page 68: 3.7

    Options and upgrades page 3-18 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 3.7 xlr expander card option (m2/eom2/xlr) 3.7.1 overview note… the m2/eom2/xlr xlr expander card option is supported by build version 3.0 and later. The xlr expander card option perm...

  • Page 69

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-19 st.Tm.E10076.3 notes… 1. Pre-encoded signals cannot be reconstructed on the analogue outputs. 2. Pre-encoded signals will raise an alarm on the digital output. Figure 3.7: xlr expander card option (...

  • Page 70

    Options and upgrades page 3-20 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 notes… 1. When the encoder is powered down the digital channel is selected with 110 w termination. 2. The digital audio input does not support spdif. Audio out connector two xlr male ...

  • Page 71: 3.8

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-21 st.Tm.E10076.3 3.8 sd decoder option (m2/eom2/dec) 3.8.1 overview notes… 1. The m2/eom2/dec sd decoderoption is supported by build version 3.1 and later. 2. This option module only fits into option ...

  • Page 72

    Options and upgrades page 3-22 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 composite video output a 75 w female bnc connector provides a composite video output. See annex b, technical specification for a list of supported video standards. Table 3.15: composi...

  • Page 73: 3.9

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-23 st.Tm.E10076.3 rs-232/rs-422 data output a 9-way d-type socket provides the data outputs. Table 3.17: rs232/rs422 data output connector item specification connector type 9-way d-type socket connecto...

  • Page 74: 3.9.2

    Options and upgrades page 3-24 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 3.9.2 assembly rear panel w if in a 75 w female bnc connector provides an if input. Table 3.18: if in connector item specification connector type 75 w bnc female connector designation...

  • Page 75: 3.10.2  Assembly

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-25 st.Tm.E10076.3 3.10.2 assembly rear panel l-band inputs two 75 w f-type female connectors provide l-band inputs. Table 3.20: l-band input connector item specification connector type 75 w f-type fema...

  • Page 76: 3.11.2  Assembly

    Options and upgrades page 3-26 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 between one and seven mpeg-2 transport stream packets can be put in each udp packet. The data link layer is ethernet according to ieee 802.3/802.3u (auto-sensing 10/100 mbit/s, twiste...

  • Page 77: 3.12

    Options and upgrades instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 3-27 st.Tm.E10076.3 asi out a 75 w female bnc connector provides an asi output. Note… this connector is not used. Table 3.22: asi out connector item specification connector type 75 w bnc female connector...

  • Page 78: 3.12.3  M2/eso2/vbr

    Options and upgrades page 3-28 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 3.12.3 m2/eso2/vbr this purchasable option upgrades the encoder to include variable bit-rate. Contact customer services for details. 3.12.4 m2/eso2/422 this purchasable option upgrade...

  • Page 79: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-1 st.Tm.E10076.3 chapter 4 4. Operating the equipment locally contents 4.1 introduction ............................................................... 4-9 4.2 establishing local control (1u)..................................

  • Page 80

    Operating the equipment locally page 4-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 snmp master option ..................................4-25 last snmp master option ..........................4-25 last snmp poll option ...............................4-25 sn...

  • Page 81

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-3 st.Tm.E10076.3 audio delay option..................................... 4-57 external delay option................................. 4-57 clip level option .....................................

  • Page 82

    Operating the equipment locally page 4-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 tx bandwidth option...................................4-81 bit-rate (188) option....................................4-81 bit-rate (204) option..................................

  • Page 83

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-5 st.Tm.E10076.3 major channel option............................... 4-101 minor channel option............................... 4-101 logical channel option ............................ 4-101...

  • Page 84

    Operating the equipment locally page 4-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.17.12store configs in backup option ................4-122 4.17.13factory 525 defaults option .....................4-123 4.17.14factory 625 defaults option ...................

  • Page 85

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-7 st.Tm.E10076.3 table 4.80: carriers options ....................................................... 4-75 table 4.81: other frequency options ......................................... 4-76 ...

  • Page 86

    Operating the equipment locally page 4-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 87: 4.1

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-9 st.Tm.E10076.3 4.1 introduction the front panel display and keypad are used to configure, control and monitor the encoder. The control interface is a structured menu which gives access to ...

  • Page 88: 4.3.2

    Operating the equipment locally page 4-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 4.2: 1u navigation keys and buttons note… the navigation keys are referred to as left, right, up and down, indicating the direction of the arrows. From the summary s...

  • Page 89: 4.3.4

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-11 st.Tm.E10076.3 for multiple choice entry · down scrolls down to next option · up scrolls up to previous option · right no action · left no action · enter accepts new setting · cancel leav...

  • Page 90: 4.4

    Operating the equipment locally page 4-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.4 establishing local control (2u) 4.4.1 input monitor at power-on the encoder runs through a boot sequence (boot time with remux option module is approximately 90 seconds...

  • Page 91: 4.4.3

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-13 st.Tm.E10076.3 4.4.3 a(udio)/v(ideo) menu (2u) the a/v menu contains some basic video and audio options. They can all be changed with the exception of the audio input levels. These are on...

  • Page 92: 4.5.2

    Operating the equipment locally page 4-14 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 4.6: 2u keypad and display functions 4.5.2 how to use the keypad each key on the keypad has more than one inscription. One press of a key makes the number appear on ...

  • Page 93: 4.5.3

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-15 st.Tm.E10076.3 4.5.3 how to use the functions associated with softkeys the following display screens show the different functions associated with the options. Note… a black diagonal cross...

  • Page 94

    Operating the equipment locally page 4-16 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 config menu front panel diagnostics menu lcd display keyboard fail relay alarm relay alarm led buzzer quit setup menu system.... See figure 4.9 video.... See figure 4.10 au...

  • Page 95: 4.5.6

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-17 st.Tm.E10076.3 4.5.6 summary screen and advanced menus see figure 4.8, for the top-level menu hierarchy. Press the more softkey in the summary screen to access the advanced menu. The adva...

  • Page 96

    Operating the equipment locally page 4-18 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 system menu service info.... Remote control.... General.... Advanced.... Mbd services 4,5 .... Build.... Quit service info menu remote control menu general menu advanced me...

  • Page 97: 4.7.2

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-19 st.Tm.E10076.3 4.7.2 service info menu (syntax = atsc 1 ) overview the service info menu is selected from the system menu by pressing the service info softkey. This menu provides options ...

  • Page 98

    Operating the equipment locally page 4-20 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.3: si level options selected option description pat/pmt/cat only program association table/ program map table/ conditional access table. Pat/pmt only program associ...

  • Page 99: 4.7.3

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-21 st.Tm.E10076.3 dst start date option (3.0 and later) to access the dst start date (daylight saving time) option, press the dst start date softkey in the service info menu. This option all...

  • Page 100

    Operating the equipment locally page 4-22 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.5: si level options selected option description pat/pmt/cat only program association table/ program map table/ conditional access table. Pat/pmt only program associ...

  • Page 101

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-23 st.Tm.E10076.3 transport stream id option to access the transport stream id option, press the transport stream id softkey in the service info menu. This enables the transport stream ident...

  • Page 102: 4.7.4

    Operating the equipment locally page 4-24 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.10: audio ac-3 descriptor options selected option description dvb & atsc both the atsc and dvb descriptors are used with the audio streams. Dvb only only the dvb de...

  • Page 103

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-25 st.Tm.E10076.3 snmp master option to access the snmp master option, press the snmp master softkey in the remote control menu . This gives the snmp master’s ip address. If this is set, onl...

  • Page 104: 4.7.5

    Operating the equipment locally page 4-26 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.13: sabus baud rate options selected option description selected option description 1200 1200 baud rate. 9600 9600 baud rate. 2400 2400 baud rate. 19200 19200 baud ...

  • Page 105

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-27 st.Tm.E10076.3 utc offset option the universal time co-ordinate (utc) is effectively the same as greenwich mean time (gmt). When including si in the output transport stream the encoder is...

  • Page 106

    Operating the equipment locally page 4-28 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 power dip recovery option to access the power dip recovery option, press the power dip recovery softkey in the general menu. Table 4.18: power dip recovery options selected...

  • Page 107: 4.7.6

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-29 st.Tm.E10076.3 4.7.6 advanced menu overview the advanced menu is selected from the system menu by pressing the advanced softkey. This menu provides options for the advanced parameters of ...

  • Page 108

    Operating the equipment locally page 4-30 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 action on pid error option to access the action on pid error option, press the action on pid error softkey in the advanced menu. Table 4.21: action on pid error options sel...

  • Page 109: 4.7.7

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-31 st.Tm.E10076.3 caution… the reset encoder option is not normally used. One example of its use is when code has been downloaded in background mode (such as base board code or video compres...

  • Page 110

    Operating the equipment locally page 4-32 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 video menu video source.... Video encoder.... Vbi.... Video source menu vbi menu video encoder menu menu options depend on video source selected setup menu teletext (all li...

  • Page 111

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-33 st.Tm.E10076.3 input source select note… this option is available in build version 3.1.0 and later. To access the inputsource select option, press the input source select softkey from the...

  • Page 112

    Operating the equipment locally page 4-34 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.25: frame rate options selected option description 29.97 hz used in 525 lines (ntsc-m + pal-m). 25 hz used in 625 lines (pal). Video locked option this option indic...

  • Page 113

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-35 st.Tm.E10076.3 to access the video bandwidth option, press the video bandwidth softkey from the video source menu. Table 4.28: video bandwidth options selected option description sharp fi...

  • Page 114: 4.8.3

    Operating the equipment locally page 4-36 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.30: noise reduction options selected option description off level 1 use noise reduction, if necessary, but don't 'damage' the picture in any way. Level 2 medium set...

  • Page 115

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-37 st.Tm.E10076.3 table 4.31: profile/level options selected option description mp@ml main profile @ main level. Typically used in 4:2:0 direct to home. 422p@ml 4:2:2 profile @ main level. T...

  • Page 116

    Operating the equipment locally page 4-38 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.33: seamless mode bit-rate (full resolution only) profile seamless 1 (mbit/s) seamless 2 (mbit/s) seamless 3 (mbit/s) seamless 4 (mbit/s) seamless 5 (mbit/s) seamle...

  • Page 117

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-39 st.Tm.E10076.3 it is possible to operate the encoder in a stand-alone variable bit-rate (vbr) mode. When in this mode the bit-rate generated by the video encoder ranges between a minimum ...

  • Page 118

    Operating the equipment locally page 4-40 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the required picture quality is set in the same menu by the vbr target quality item. When running in vbr mode the two top-level status screens show the current bit-rate bei...

  • Page 119

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-41 st.Tm.E10076.3 table 4.34: resolution options selected option description 625 line modes 525 line modes auto (720x576) auto (720x480) 720 x576 720 x480 704 x576 704x480 640 x576 640x480 5...

  • Page 120

    Operating the equipment locally page 4-42 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.37: afd information video input encoder video index extraction encoder afd off encoder afd on encoder afd on (no action on error) sequence_header aspect_ratio_infor...

  • Page 121

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-43 st.Tm.E10076.3 gop length option to access the group of pictures (gop) length option, press the gop length softkey in the video encoder menu. This enables the video gop structure length t...

  • Page 122

    Operating the equipment locally page 4-44 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 with frame pictures a frame of a field 1 and field 2 is encoded as a single unit. With field pictures each individual field of video is encoded as a single unit, but must b...

  • Page 123

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-45 st.Tm.E10076.3 pid option the pid option is selected from the video encoder menu by pressing the pid softkey. The option is used for entering or updating video pids, as required. Enter a ...

  • Page 124: 4.8.4

    Operating the equipment locally page 4-46 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.8.4 vertical blanking interval (vbi) menu overview the vbi menu is selected from the video menu by pressing the vbi softkey. This menu permits the selection of vbi parame...

  • Page 125

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-47 st.Tm.E10076.3 vbi in picture option notes… 1. The vbi in picture option is only accessible if the selected video profile/level is 422p@ml 6 . 2. Vbi in picture transmits the vbi waveform...

  • Page 126

    Operating the equipment locally page 4-48 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 wss (line 23) option notes… 1. This option is only available when frame rate is 25 hz. 2. Aspect ratio will change when wss is enabled. To access the wss (line 23) option, ...

  • Page 127

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-49 st.Tm.E10076.3 table 4.43: vbi - line ‘n’ options option description frame rate = 29.97 hz off vbi data is not extracted from the line. Vertical interval time code vitc data extracted fro...

  • Page 128

    Operating the equipment locally page 4-50 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 field 1 field 2 272 9 same options as line 10 10 vitc (smpte), video index, off, closed caption, nielsen/amol 1, nielsen/amol 11 273 10 same options as line 10 11 11 same o...

  • Page 129

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-51 st.Tm.E10076.3 field 1 field 2 7 teletext system b or inverted teletext, vitc, video index, closed caption, wide screen signalling (wss), off, video programming system (vps) 319 same opti...

  • Page 130: 4.9

    Operating the equipment locally page 4-52 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.9 audio menu 4.9.1 overview the audio menu is selected from the setup menu by pressing the audio softkey. This menu permits the selection of audio parameters. Any option ...

  • Page 131

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-53 st.Tm.E10076.3 audio menu audio a.... Audio b.... Audio xlr.... Audio languages menu options depend on coding standard selected audio a menu audio b menu setup menu shaded options are sho...

  • Page 132

    Operating the equipment locally page 4-54 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 source option to access the source option, press the source softkey in the audio a menu . Table 4.44: source options selected option description off no audio packets are se...

  • Page 133

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-55 st.Tm.E10076.3 audio bit-rate option notes… 1. This option is only shown when the coding standard is ac-3 pass-thru, mpeg layer 2 or dolby digital (ac-3). 2. When ac-3 pass-thru is select...

  • Page 134

    Operating the equipment locally page 4-56 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 input level r option note… this option is not shown when the coding standard is mpeg layer 2 (mono) or dolby digital (ac-3) (1/0). This option indicates the input level of ...

  • Page 135

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-57 st.Tm.E10076.3 lip sync offset option note… this option is only available if the auto lip sync option is set to on. To access the lip sync offset option, press the lip sync offset softkey...

  • Page 136

    Operating the equipment locally page 4-58 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 clip level option to access the clip level option, press the clip level softkey in the audio a menu . This screen enables the audio clipping level to be set. Notes… 1. This...

  • Page 137

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-59 st.Tm.E10076.3 smpte 302m standard option notes… 1. This option is only shown when the coding standard is linear pcm or dolby e pass-thru. 2. Problems may be experienced with some receive...

  • Page 138

    Operating the equipment locally page 4-60 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.55: bit stream mode options selected option description complete main music & effects visually impaired hearing impaired dialogue commentary emergency voice over/ka...

  • Page 139

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-61 st.Tm.E10076.3 production info option note… this option is only shown when the coding standard is dolby digital (ac-3). To access the production info option, press the production info sof...

  • Page 140

    Operating the equipment locally page 4-62 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 copyright option note… this option is shown when the coding standard is dolby digital (ac-3) or mpeg layer 2. To access the copyright option, press the copyright softkey in...

  • Page 141

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-63 st.Tm.E10076.3 rf protection option note… this option is only shown when the coding standard is dolby digital (ac-3). To access the rf protection option, press the rf protection softkey i...

  • Page 142

    Operating the equipment locally page 4-64 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 low pass filter option note… this option is only shown when the coding standard is dolby digital (ac-3). To access the low pass filter option, press the low pass filter sof...

  • Page 143: 4.9.3

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-65 st.Tm.E10076.3 4.9.3 audio languages menu the audio languages menu is selected from the audio menu by pressing the audio languages softkey. This menu permits the selection of languages us...

  • Page 144: 4.10

    Operating the equipment locally page 4-66 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.65: output source options selected option description sdi embedded (1-4) any of the sdi embedded audio feeds. Xlr input (monitor) output the audio which is input to...

  • Page 145

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-67 st.Tm.E10076.3 only shown if m2/eom2/dat option fitted data menu data a - rs232.... Data b - rs422.... Data x a - rs232.... Data x b - rs422.... Setup menu shaded options are showing stat...

  • Page 146

    Operating the equipment locally page 4-68 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.68: baud rate options selected option description selected option description 1200 1200 baud rate. 9600 9600 baud rate. 2400 2400 baud rate. 19200 19200 baud rate. ...

  • Page 147

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-69 st.Tm.E10076.3 bit-rate option to access the bit-rate option, press the bit-rate softkey in the data b - rs422 menu. This enables the bit-rate of the rs-422 synchronous data channel to be...

  • Page 148: 4.11

    Operating the equipment locally page 4-70 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.10.4 data xa - rs232 menu (when m2/eom2/dat fitted) overview note… in the data xa - rs232 menu, x = the number of the option slot that the module fits into. See section 4...

  • Page 149

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-71 st.Tm.E10076.3 setup menu output menu satellite modulator menu if output l-band output descriptor type menu options depend on descriptor type selected delivery descriptor menu cable other...

  • Page 150

    Operating the equipment locally page 4-72 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.11.2 output format option to access the output format option, press the output format softkey in the output menu. The menus available depend upon which option cards are f...

  • Page 151

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-73 st.Tm.E10076.3 table 4.72: band plan options selected option selected option australia ireland europe vhf south africa europe catv french overseas pia italy france morocco japan new zeala...

  • Page 152

    Operating the equipment locally page 4-74 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 note… this option is status only unless manual has been selected in the band plan option. Table 4.75: bandwidth options selected option description 6 mhz terrestrial transm...

  • Page 153

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-75 st.Tm.E10076.3 if the hierarchy option is set to alpha=n, then the fec (hp) and fec (lp) parameters provide two levels of modulation. Transmission starts with the code rate for the hp lev...

  • Page 154

    Operating the equipment locally page 4-76 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.81: other frequency options selected option description none no other frequency is in use. In use one or more other frequencies are in use. 4.11.6 descriptor type =...

  • Page 155

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-77 st.Tm.E10076.3 table 4.84: fec (inner) options selected option description no conv. Coding cable channel does not use inner fec rate. 1/2 cable channel uses inner fec rate of 1/2. 2/3 cab...

  • Page 156

    Operating the equipment locally page 4-78 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 orbital position option to access the orbital position option, press the orbital position softkey in the delivery descriptor menu. This enables the orbital position of the ...

  • Page 157

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-79 st.Tm.E10076.3 if power option to access the if power option, press the if power softkey in the satellite modulator menu . Table 4.90: if power options valid input range description min: ...

  • Page 158

    Operating the equipment locally page 4-80 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 symbol rate option to access the symbol rate option, press the symbol rate softkey in the satellite modulator menu . Table 4.93: symbol rate options valid input range descr...

  • Page 159

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-81 st.Tm.E10076.3 tx bandwidth factor option to access the tx bandwidth factor option, press the tx bandwidth factor softkey in the satellite modulator menu. This option is used to calculate...

  • Page 160

    Operating the equipment locally page 4-82 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 sat deliv freq option to access the sat deliv freq option, press the sat deliv freq softkey in the satellite modulator menu. Table 4.98: sat deliv freq options valid input ...

  • Page 161

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-83 st.Tm.E10076.3 polarisation option to access the polarisation option, press the polarisation softkey in the satellite modulator menu . This enables the polarisation of the satellite trans...

  • Page 162

    Operating the equipment locally page 4-84 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 frequency option to access the frequency option press the frequency softkey in the satellite modulator menu . Table 4.103: frequency options valid input range description m...

  • Page 163

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-85 st.Tm.E10076.3 preset pwr norm option refer to preset pwr norm option on page 4-81 for details. Upconverter power to access the upconverter power option, press the upconverter power softk...

  • Page 164

    Operating the equipment locally page 4-86 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 bandwidth option to access the bandwidth option, press the bandwidth softkey in the ofdm modulator menu . Table 4.104: bandwidth options selected option description 6 mhz 6...

  • Page 165

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-87 st.Tm.E10076.3 transmission option to access the transmission option, press the transmission softkey in the ofdm modulator menu . Table 4.108: transmission options selected option descrip...

  • Page 166

    Operating the equipment locally page 4-88 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.11.11 output format = ip streamer (3.1 and later) own ip address option to access the own ip address option, press the own ip address softkey in the ip streamer menu . Th...

  • Page 167: 4.12

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-89 st.Tm.E10076.3 multicast ip address option this option is not used. Time to live option to access the time to live option, press the time to live softkey in the ip streamer menu . This is...

  • Page 168: 4.12.5  On Air Option

    Operating the equipment locally page 4-90 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.12.3 mux output, with remux card to obtain an output when a remux card is fitted, set the options in the following menus: · host bit-rate option on page 4-97 · remux modu...

  • Page 169

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-91 st.Tm.E10076.3 setup menu mux menu shaded options are showing status and cannot be changed. Mux.... Remux module.... 1.Service 2 .... 2.Service (1).... Up to 13.Service 2 .... 1[mdb].Serv...

  • Page 170

    Operating the equipment locally page 4-92 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 setup menu mux menu shaded options are showing status and cannot be changed. Mux.... Remux module.... 2.Service 2, 7 .... 3.Program 2 (1).... Up to xxxx.Service 2 .... Pack...

  • Page 171: 4.12.7  Clock

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-93 st.Tm.E10076.3 4.12.6 bit-rate (188) and bit-rate (204) option note… if the packet length option is set to 188 bytes then only the bit-rate (188) option is displayed. If the packet length...

  • Page 172: 4.12.9  Fpga Firmware

    Operating the equipment locally page 4-94 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.12.9 fpga firmware this option indicates the version of the fpga firmware. It is for status only and cannot be changed. 4.12.10 ras firmware this option indicates the ver...

  • Page 173

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-95 st.Tm.E10076.3 enter up to seven digits using the keypad, then press the enter softkey to accept the scrambling code. If less then seven digits are entered, they are prefixed with 0’s (ze...

  • Page 174

    Operating the equipment locally page 4-96 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 to access the biss 13 key entry option, press the biss key entry softkey in the mux menu. This enables the scrambling key used in biss key entry scrambling mode to be set (...

  • Page 175: 4.13

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-97 st.Tm.E10076.3 4.13 remux 4.13.1 introduction if the remux option module m2/eom2/remux is fitted, there is an additional item in the mux menu (see figure 4.18) and a further remux module ...

  • Page 176

    Operating the equipment locally page 4-98 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 note… if intelligent mode is selected, the action on pid error option (see page 4-30) in the setup/system/advanced menu must be set to auto correct. If dumb mode is selecte...

  • Page 177

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-99 st.Tm.E10076.3 table 4.120: output options selected option description off the service is not included in the output. On the service is included in the output, unscrambled. On (ras) the s...

  • Page 178

    Operating the equipment locally page 4-100 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 name out option to access the name out option press the name out softkey in the 1.Service menu . This option allows the service output name to be changed. Service prov (in...

  • Page 179

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-101 st.Tm.E10076.3 major channel option note… this option is only shown in atsc mode. To access the major channel option, press the major channel softkey in the 2.Service menu. This enables ...

  • Page 180

    Operating the equipment locally page 4-102 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 pmt pid option note… this option is status only for the host encoder but can be changed for incoming services. To access the pmt pid option, press the pmt pid softkey in t...

  • Page 181

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-103 st.Tm.E10076.3 ecm (ca) pid option note… this option is status only for the host encoder but can be changed for incoming services. Available from build version 2.2.0 and later. To access...

  • Page 182

    Operating the equipment locally page 4-104 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.129: audio (type of audio) options selected option description min: 1 max: 8190 (1ffeh) step size: 1 data (type of data) option notes… 1. This option is status onl...

  • Page 183: 4.14

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-105 st.Tm.E10076.3 4.14 ird menu (3.1 and later) 4.14.1 overview note… this option is available in build version 3.1.0 and later. The ird menu is selected from the setup menu by pressing the...

  • Page 184

    Operating the equipment locally page 4-106 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 setup menu ird menu ird mode ird ts source ird demod (if fitted).... Service list.... Ird video.... Ird audio1.... Ird audio2.... Ird vbi.... Ird ca.... Ird data.... Ird s...

  • Page 185: 4.14.4  Ird Demod Menu

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-107 st.Tm.E10076.3 4.14.4 ird demod menu frequency option to access the frequency option, press the frequency softkey in the ird demod menu . This value is either the l-band frequency for th...

  • Page 186

    Operating the equipment locally page 4-108 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 polarisation option to access the polarisation option, press the polarisation softkey in the ird demod menu . Table 4.136: polarisation options selected option description...

  • Page 187

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-109 st.Tm.E10076.3 lnb lo freq option to access the lnb lo freq option, press the lnb lo freq softkey in the ird demod menu . This value should be set to the lnb’s lower local oscillator fre...

  • Page 188: 4.14.5  Service List Menu

    Operating the equipment locally page 4-110 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 status only options for the ird demod menu the following options are for status only and cannot be changed. · lnb fault status · demod status · part number · code version ...

  • Page 189

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-111 st.Tm.E10076.3 525 line composite option to access the 525 line composite option, press the 525 line composite softkey in the ird video menu . Table 4.145: 525 line composite options sel...

  • Page 190

    Operating the equipment locally page 4-112 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 edh enable option to access the edh enable option, press the edh enable softkey in the ird video menu . This allows the pass-through of error detection hierarchy (edh) to ...

  • Page 191

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-113 st.Tm.E10076.3 4.14.7 ird audio 1 and audio 2 menus note… the menu structures are identical for audio channel 1 and audio channel 2. Audio stream this shows the currently selected audio ...

  • Page 192

    Operating the equipment locally page 4-114 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 4.153: downmix mode options selected option description stereo pair dolby pro logic stereo mute state option to access the mute state option, press the mute state so...

  • Page 193: 4.14.8  Ird Ca Menu

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-115 st.Tm.E10076.3 4.14.8 ird ca menu overview if the ird is operating in tracking mode, then the ird ca menu has no options because the ca is automatically configured to match the settings ...

  • Page 194: 4.14.9  Ird Vbi Menu

    Operating the equipment locally page 4-116 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 4.14.9 ird vbi menu vits enable option to access the vits enable option, press the vits enable softkey in the ird vbi menu . Table 4.156: vits enable options selected opti...

  • Page 195: 4.14.10 Ird Data Menu

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-117 st.Tm.E10076.3 4.14.10 ird data menu async stream option to access the async stream option, press the async stream softkey in the ird data menu . This is used to select the asynchronous ...

  • Page 196: 4.15

    Operating the equipment locally page 4-118 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 teletext stream option to access the teletext stream option, press the teletext stream softkey in the ird data menu . This is used to select the teletext stream to be deco...

  • Page 197: 4.16

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-119 st.Tm.E10076.3 restore defaults to access the restore defaults option, press the restore defaults softkey in the error masks menu. This sets alarm, fail and error messages to the factory...

  • Page 198

    Operating the equipment locally page 4-120 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the encoder normally holds the following configurations: · one active configuration (it runs the encoder) · sixteen user configurations (in the user flash) · sixteen backu...

  • Page 199

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-121 st.Tm.E10076.3 4.17.5 backup configurations backup flash stores a copy of each of the 16 user configurations when you select store configs in backup,you will be asked for the password he...

  • Page 200

    Operating the equipment locally page 4-122 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 this menu provides options for loading and storing predefined configurations and updating and restoring backup configurations. 4.17.9 load active config option to access t...

  • Page 201

    Operating the equipment locally instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 4-123 st.Tm.E10076.3 4.17.13 factory 525 defaults option this option enables the 16 user configurations to be overwritten by the factory default settings for 525 line/29.97 hz video operation....

  • Page 202

    Operating the equipment locally page 4-124 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 203: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 5-1 st.Tm.E10076.3 chapter 5 5. Web browser interface contents 5.1 introduction ............................................................... 5-3 5.2 how to set up internet explorer for the web browser interface..............

  • Page 204

    Web browser interface page 5-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 205: 5.1

    Web browser interface instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 5-3 st.Tm.E10076.3 5.1 introduction there is a range of diagnostic and other utilities that can be accessed via a web browser, such as internet explorer. Before these can be accessed it is important to ...

  • Page 206

    Web browser interface page 5-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 5.2: settings dialog box 4. For check for newer versions of stored pages, select every visit to the page or any changes made to the pages will not be displayed. Click ok to sav...

  • Page 207

    Web browser interface instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 5-5 st.Tm.E10076.3 6. Click lan settings to open the local area network (lan) settings dialog box (see figure 5.4). Figure 5.4: local area network (lan) settings dialog box 7. Click advanced to open the...

  • Page 208: 5.3

    Web browser interface page 5-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 8. In the exceptions area type the ip address of the encoder. 9. Click ok as many times as necessary to close all dialog boxes until only the internet explorer window is open. For int...

  • Page 209

    Web browser interface instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 5-7 st.Tm.E10076.3 figure 5.7: build info – version numbers figure 5.8: build info - release notes option 2, tools 1 -displays a screen similar to: · figure 5.9 when clicking bandwidth calculations, ofd...

  • Page 210

    Web browser interface page 5-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 bandwidth calculations, ofdm bit-rate calculations - the bit rate calculator (see figure 5.9) allows you to enter various parameters and the optimal bit-rate (mbit/s) is automatically...

  • Page 211

    Web browser interface instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 5-9 st.Tm.E10076.3 figure 5.11: tools – osd toolkit video monitor - the video monitor (see figure 5.12) displays the video input to the encoder. Figure 5.12: tools – video monitor option 3, customer sup...

  • Page 212

    Web browser interface page 5-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 5.13: backplane modes figure 5.14: installed modules option 6, licenced features -shows a list of all the features which are, and can be, enabled when the appropriate licence ...

  • Page 213: 5.4

    Web browser interface instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 5-11 st.Tm.E10076.3 option 8, encoder errors –shows a list of active errors, masked active errors and latched errors. Option 9, event log -shows the events and tests which have been performed since the ...

  • Page 214

    Web browser interface page 5-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 215: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 6-1 st.Tm.E10076.3 chapter 6 6. Preventive maintenance and fault-finding contents 6.1 introduction ............................................................... 6-3 6.2 preventive maintenance..................................

  • Page 216

    Preventive maintenance and fault-finding page 6-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 217: 6.1

    Preventive maintenance and fault-finding instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 6-3 st.Tm.E10076.3 6.1 introduction this chapter provides the schedules and instructions, where applicable, for routine inspection, cleaning and maintenance of the equipment which sho...

  • Page 218: 6.3

    Preventive maintenance and fault-finding page 6-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 replacement parts when replacement parts are required, be sure the service technician has used parts specified by the manufacturer or which have the same characteri...

  • Page 219: 6.4

    Preventive maintenance and fault-finding instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 6-5 st.Tm.E10076.3 6.4 errors and diagnostics menus – when to use them 6.4.1 error messages figure 6.1: finding the errors menu investigate any run-time errors by pressing the active ...

  • Page 220

    Preventive maintenance and fault-finding page 6-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure 6.2: finding the diagnostics menu lcd display test press the lcd display softkey to access the option and then press any key to cycle through the test patter...

  • Page 221: 6.5

    Preventive maintenance and fault-finding instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 6-7 st.Tm.E10076.3 buzzer test press the buzzer softkey to access the option which immediately causes a buzzer to sound. Press any key (except the quit softkey) to turn the buzzer off...

  • Page 222: 6.5.3

    Preventive maintenance and fault-finding page 6-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 2. Confirm that the equipment hardware configuration is suitable for the purpose and has been correctly installed and connected (see chapter 2, installing the equip...

  • Page 223: 6.5.4

    Preventive maintenance and fault-finding instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 6-9 st.Tm.E10076.3 figure 6.3: orientation of fuse carrier if the replacement fuse also blows, do not continue. Disconnect the equipment and contact customer services for advice. 6.5....

  • Page 224: 6.5.5

    Preventive maintenance and fault-finding page 6-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 6.5.5 audio fault-finding if having problems when using the dolby e pass-through coding mode then refer to annex g, audio modes, for information about using this m...

  • Page 225: 6.8

    Preventive maintenance and fault-finding instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page 6-11 st.Tm.E10076.3 6.8 power supply problems/green led on front panel unlit 6.8.1 symptoms warning... Do not attempt to service the power supply unit as opening or removing covers ma...

  • Page 226: 6.9

    Preventive maintenance and fault-finding page 6-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table 6.4: fans not working/overheating step action if result of action is yes… if result of action is no… 1 check fan rotation. Inspect the fans located at the si...

  • Page 227

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page a-1 st.Tm.E10076.3 annex a a. Glossary the following list covers most of the abbreviations, acronyms and terms as used in tandberg television limited manuals. All terms may not be included in this manual. Mm micrometre (form...

  • Page 228

    Glossary page a-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b3zs bipolar with three zero substitution: a method of eliminating long zero strings in a transmission. It is used to ensure a sufficient number of transitions to maintain system synchronisation w...

  • Page 229

    Glossary instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page a-3 st.Tm.E10076.3 compression reduction in the number of bits used to represent the same information. For the purposes of a broadcast system, it is the process of reducing digital picture information by discarding ...

  • Page 230

    Glossary page a-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 earth technical earth: ensures that all equipment chassis within a rack are at the same potential, usually by connecting a wire between the technical earth terminal and a suitable point on the rac...

  • Page 231

    Glossary instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page a-5 st.Tm.E10076.3 if intermediate frequency: usually refers to the 70 mhz or 140 mhz output of the modulator in cable, satellite and terrestrial transmission applications. Interframe coding compression coding invol...

  • Page 232

    Glossary page a-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 lvds low voltage differential signal: lvds is a generic multi-purpose interface standard for high speed / low power data transmission. It was standardised in ansi/tia/eia-644-1995 standard (aka rs...

  • Page 233

    Glossary instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page a-7 st.Tm.E10076.3 nvod near video on demand: method of offering multiple showings of movies or events. The showings are timed to start at set intervals, determined by the broadcaster. Each showing of a movie or eve...

  • Page 234

    Glossary page a-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 programme a linking of one or more events under the control of a broadcaster. For example, football match, news, film show. In the mpeg-2 concept, the collection of elementary streams comprising t...

  • Page 235

    Glossary instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page a-9 st.Tm.E10076.3 si service information: digital information describing the delivery system, content and scheduling (timing) of broadcast data streams. Dvb-si data provides information to enable the ird to automat...

  • Page 236

    Glossary page a-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 uart universal asynchronous receiver transmitter: a device providing a serial interface for transmitting and receiving data. Uhf ultra high frequency: a portion of the electromagnetic spectrum co...

  • Page 237: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-1 st.Tm.E10076.3 annex b b. Technical specification contents b.1 inputs ......................................................................B-3 b.1.1 video.............................................................B-3 ...

  • Page 238

    Technical specification page b-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 list of tables table b.1: serial digital video specification ................................. B-3 table b.2: h sync specification .....................................................

  • Page 239: B.1

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-3 st.Tm.E10076.3 b.1 inputs b.1.1 video sdi table b.1: serial digital video specification item specification safety status selv connector designation sdi in connector type 75 w bnc female socket inp...

  • Page 240

    Technical specification page b-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 analogue video specification table b.3: analogue video specification item specification analogue input 625 line composite pal-b, -d, -g, -h, -i 525 line composite ntsc-m, pal-m as s...

  • Page 241

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-5 st.Tm.E10076.3 pattern item specification vits line 17 pulse/bar k-rating ± 0.5% kf vits line 17 p-b ratio 99% - 101% vits line 17 chrom/lum delay ±20 ns vits line 17 chrom/lum gain 95 – 105% 100%...

  • Page 242: B.1.2

    Technical specification page b-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 international television standards table b.7 shows television standards appropriate to the encoder. Table b.7: international television standards as indicated in menus m m b g h i d...

  • Page 243

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-7 st.Tm.E10076.3 notes… 1. Refer to annex g, audio modes when using these coding standards. 2. Problems may be experienced with some receivers if the encoder and decoder are not using the same versi...

  • Page 244: B.2

    Technical specification page b-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 item specification noise rms l a-weighted 70 db unweighted 70 db user levels @ 1 khz (0 to 50 db) k +10 db ±0.2 db -10 db ±0.2 db -20 db ±0.2 db -30 db ±0.2 db -40 db ±0.3 db -50 db...

  • Page 245: B.3

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-9 st.Tm.E10076.3 b.3 outputs b.3.1 if outputs (1u, e5714) table b.12: if out main specification (1u, e5714) item specification safety status: selv connector designation: if out main connector type: ...

  • Page 246: B.3.2

    Technical specification page b-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table b.13: if monitor output specification (1u, e5714) item specification safety status: selv connector designation: if out monitor connector type: bnc, female 75 w this connector...

  • Page 247: B.3.3

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-11 st.Tm.E10076.3 table b.15: if out monitor specification (e5740-if) item specification safety status: selv connector type: bnc female 75 w connector designation: if out monitor output impedance: 7...

  • Page 248: B.3.4

    Technical specification page b-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table b.17: l-band monitor output specification (e5740-lband) item specification safety status: selv connector type: f-type female connector designation: l-band out monitor output ...

  • Page 249: B.4

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-13 st.Tm.E10076.3 b.4 control and monitoring b.4.1 remote control - ethernet 1 and 2 table b.21: ethernet specification item specification safety status selv connector designation ethernet#1 and eth...

  • Page 250: B.4.6

    Technical specification page b-14 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b.4.6 rs-422 data this provides an rs-422 synchronous, serial communications data input interface. Table b.24: rs-422 data specification item specification safety status selv type ...

  • Page 251: B.5

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-15 st.Tm.E10076.3 b.5 power supply b.5.1 ac power input this equipment is fitted with an wide-ranging power supply. It is suitable for supply voltages of 100-120 vac -10% +6% or 220-240 vac -10% +6%...

  • Page 252: B.5.2

    Technical specification page b-16 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b.5.2 dc power input the power unit used in the encoder is a soft-start type designed for use on dc supplies having a negative or positive earth (vehicle chassis) voltage supply in...

  • Page 253: B.7

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-17 st.Tm.E10076.3 b.7 environmental conditions table b.28: environmental specification item specification operational temperature -10 °c to +50°c (14°f to 122°f) ambient with free air-flow over temp...

  • Page 254: B.8.2

    Technical specification page b-18 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b.8.2 emc 2 the equipment has been designed and tested to meet the following: en 55022 and as/nzs 3548 european australia and new zealand emission standard limits and methods of me...

  • Page 255: B.8.4

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-19 st.Tm.E10076.3 b.8.4 ce marking the ce mark is affixed to indicate compliance with the following directives: 89/336/eec of 3 may 1989 on the approximation of the laws of the member states relatin...

  • Page 256: B.10  Option Modules

    Technical specification page b-20 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b.10 option modules b.10.1 m2/eom2/audlin additional audio and linear pcm option module see section b.1.2, audio for details. B.10.2 m2/eom2/dat rs-232 and rs-422 data input option...

  • Page 257

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-21 st.Tm.E10076.3 b.10.3 m2/eom2/remux remux option module connectors note… the m2/eom2/remux remux option module is supported by encoder software version 2.2.0 and later. Table b.32: dvb asi in 1, ...

  • Page 258

    Technical specification page b-22 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table b.35: dvb asi out 1 - led indications item specification red led on output disabled off output enabled green led off output not in use flash (1:3 mark:space) 188 byte packets...

  • Page 259

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-23 st.Tm.E10076.3 b.10.4 m2/eom2/xlr, xlr expander card option note… the m2/eom2/xlr, xlr expander card optionis supported by encoder software version 3.0 and later. Table b.36: analogue and digital...

  • Page 260

    Technical specification page b-24 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b.10.5 m2/eom2/dec, sd decoder card option note… the m2/eom2/dec, sd decoder card optionis supported by encoder software version 3.1 and later. Table b.37: asi output (sd decoder) ...

  • Page 261

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-25 st.Tm.E10076.3 table b.40: audio output (sd decoder) item specification safety status: selv connector type: 15-way d-type female analogue output nominal output impedance: 50 w clip level: +6 dbm ...

  • Page 262: Option

    Technical specification page b-26 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b.10.6 m2/eom2/qpskdemod, qpsk demodulator card option note… the m2/eom2/qpskdemod, qpsk demodulator card optionis supported by encoder software version 3.1 and later. Table b.42: ...

  • Page 263: Option

    Technical specification instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page b-27 st.Tm.E10076.3 b.10.7 m2/eom2/satdemod, 16qam demodulator card option note… the m2/eom2/satdemod, 16qam demodulator card optionis supported by encoder software version 3.1 and later. Table b.44: ...

  • Page 264

    Technical specification page b-28 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 265: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page c-1 st.Tm.E10076.3 annex c c. Predefined user configurations contents c.1 introduction ...............................................................C-3 c.2 525/625 line default settings...................................C-...

  • Page 266

    Predefined user configurations page c-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 267: C.1

    Predefined user configurations instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page c-3 st.Tm.E10076.3 c.1 introduction there are sixteen predefined user configurations. These are a quick and easy way to configure the encoder without having to enter individual parameters. C.2 ...

  • Page 268

    Predefined user configurations page c-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 module parameter default value output mode satellite setup password off display errors yes lcd brightness medium snmp control during initialisation no reply system type local...

  • Page 269

    Predefined user configurations instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page c-5 st.Tm.E10076.3 module parameter default value ident text ident mode ident text foreground colour white ident text background colour blue ident text translucence semi-translucent vbi: telete...

  • Page 270

    Predefined user configurations page c-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 module parameter default value language (r) english clip level 18 db pid 0x100 - 0x105 termination 20 kΩ auto lip sync on lip sync delay 111 ms lip sync offset 0 ms audio (do...

  • Page 271: C.4

    Predefined user configurations instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page c-7 st.Tm.E10076.3 c.4 predefined user configurations the predefined user configurations have the same settings as table c.2 except for those differences shown in table c.3. Table c.3: predefin...

  • Page 272

    Predefined user configurations page c-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 configuration number service name variable value 11 mega low delay 6 mhz video bit-rate 2 mbit/s video compression mode mega low delay video profile/level mp@ml gop structure...

  • Page 273

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page d-1 st.Tm.E10076.3 annex d d. Language abbreviations languages are shown in alphabetical order. Language abbreviation afrikaans afr albanian alb arabic ara basque baq breton bre bulgarian bul chinese chi czech cze danish dan...

  • Page 274

    Language abbreviations page d-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the following non-iso 1 languages are supported. Note… only applicable for a transport stream going to an alteia receiver. Reference abbreviation main one aux two international sound...

  • Page 275: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-1 st.Tm.E10076.3 annex e e. Creating and downloading a logo contents e.1 introduction ...............................................................E-3 e.2 summary of features.................................................

  • Page 276

    Creating and downloading a logo page e-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 277: E.1

    Creating and downloading a logo instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-3 st.Tm.E10076.3 e.1 introduction the encoder includes a logo overlay facility whereby an image can be overlaid onto the active video prior to encoding. This enables broadcasters to trademar...

  • Page 278

    Creating and downloading a logo page e-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 figure e.1: web browser interface the dialogue box, see figure e.2, will be displayed. Figure e.2: file download dialogue box clicking on option open this file from its curr...

  • Page 279: E.4

    Creating and downloading a logo instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-5 st.Tm.E10076.3 figure e.3: files for osd creator and loader e.4 creating a logo using osd creator osd creator (creator.Exe) is an application for creating logo files (.Osd format) for use ...

  • Page 280: E.5.2

    Creating and downloading a logo page e-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 an example of a logo is shown in figure e.4. Figure e.4: osd creator screen showing example logo e.5.2 loading a .Bmp file select file/open from the menu, and choose a file ...

  • Page 281

    Creating and downloading a logo instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-7 st.Tm.E10076.3 osd creator uses a colour palette with a maximum of 256 entries. Each pixel in the image is mapped to an entry in the palette, which holds a value for the red, green and blu...

  • Page 282: E.5.4

    Creating and downloading a logo page e-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 click the key file toolbar button. Select the key file. The inactive area of the image should now be transparent (background-coloured). Change the background colour to verif...

  • Page 283: E.6

    Creating and downloading a logo instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-9 st.Tm.E10076.3 e.6 downloading a logo using osd loader the osd loader application (osd.Exe) is used for downloading logo (.Osd) files to the encoder and controlling which are displayed. Th...

  • Page 284: E.7.2

    Creating and downloading a logo page e-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 the resolution mode must be set to match the video resolution being used. This adjusts the preview screen to the dimensions of the active video. Table e.1: resolution modes...

  • Page 285

    Creating and downloading a logo instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-11 st.Tm.E10076.3 576 lines 1 720 720 pixels digital active picture 702 pixels analogue active picture pixel 1 2 line field 23 336 337 338 24 25 623 310 osd loader co-ordinates (858,619) osd...

  • Page 286: E.7.3

    Creating and downloading a logo page e-12 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 e.7.3 show and hide regions the download button defines a region in the encoder, which remains until the encoder is turned off, the remove button is clicked, or the region ...

  • Page 287: E.8

    Creating and downloading a logo instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page e-13 st.Tm.E10076.3 e.8 fault-finding if there appears to be a problem creating or downloading a logo check the following: · if the communications box reads "error creating socket", there may ...

  • Page 288

    Creating and downloading a logo page e-14 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 289: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page f-1 st.Tm.E10076.3 annex f f. Band plans contents f.1 channels and centre frequencies ...........................F-3 list of tables table f.1: australia ..........................................................................

  • Page 290

    Band plans page f-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 291: F.1

    Band plans instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page f-3 st.Tm.E10076.3 f.1 channels and centre frequencies the output menu has options called band plan and channel (see chapter 4, operating the equipment locally). Once a country has been selected in the band plan o...

  • Page 292

    Band plans page f-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table f.2: europe vhf uhf channel centre frequency in mhz uhf channel centre frequency in mhz e 2 50.500 e 8 198.500 e 3 57.500 e 9 205.500 e 4 64.500 e 10 212.500 e 5 177.500 e 11 219.500 e 6 1...

  • Page 293

    Band plans instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page f-5 st.Tm.E10076.3 table f.6: new zealand uhf channel centre frequency in mhz uhf channel centre frequency in mhz 1 47.500 6 191.500 2 57.500 7 198.500 3 64.500 8 205.500 4 177.500 9 212.500 5 184.500 10 219.500 t...

  • Page 294

    Band plans page f-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table f.9: ireland uhf channel centre frequency in mhz uhf channel centre frequency in mhz i a 48.500 i f 194.000 i b 56.500 i g 202.000 i c 64.500 i h 210.000 i d 178.000 i j 218.000 i e 186.00...

  • Page 295

    Band plans instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page f-7 st.Tm.E10076.3 table f.13: japan uhf channel centre frequency in mhz uhf channel centre frequency in mhz uhf channel centre frequency in mhz uhf channel centre frequency in mhz j 1 93.000 18 503.000 35 605.000...

  • Page 296

    Band plans page f-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 table f.15: ccir 2 uhf channel centre frequency in mhz uhf channel centre frequency in mhz uhf channel centre frequency in mhz 21 474.000 38 610.000 55 746.000 22 482.000 39 618.000 56 754.000 2...

  • Page 297: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page g-1 st.Tm.E10076.3 annex g g. Audio modes contents g.1 analogue audio........................................................ G-3 g.2 digital audio............................................................. G-3 g.3 embedde...

  • Page 298

    Audio modes page g-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 299: G.1

    Audio modes instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page g-3 st.Tm.E10076.3 g.1 analogue audio figure g.1 shows the coding methods that may be used with the analogue audio input. Analogue audio code to linear pcm linear pcm internal coding musicam dolby (ac-3) independ...

  • Page 300: G.3

    Audio modes page g-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 g.3 embedded audio on the sdi figure g.3 shows the audio signal flow on the base board. While six audio stereo pairs are available, only two stereo pairs can be processed by the base board at a...

  • Page 301

    Audio modes instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page g-5 st.Tm.E10076.3 4:1 4:1 group 1 group 2 group 3 group 4 group 1 group 2 group 3 group 4 sdi embedded 1 sdi embedded 2 audio router stereo pair a sdi embedded 4 de-embedder 1 de-embedder 2 interface and convers...

  • Page 302

    Audio modes page g-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 303: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page h-1 st.Tm.E10076.3 annex h h. Error messages contents h.1 introduction ...............................................................H-3 h.2 dealing with error messages ....................................H-3 h.3 general er...

  • Page 304

    Error messages page h-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 305: H.1

    Error messages page h-3 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 h.1 introduction warning… do not remove the covers of this equipment. Hazardous voltages are present within this equipment and may be exposed if the covers are removed. Only tandberg televis...

  • Page 306: H.3

    Error messages page h-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 h.3 general errors table h.1: general error messages error message action to take lcd not found temp sensor no pulse temp sensor bad crc temp sensor bad data temp sensor busy temp sensor com...

  • Page 307: H.4

    Error messages instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page h-5 st.Tm.E10076.3 h.4 video source related errors table h.2: video source error messages error message action to take comms error power encoder off, then check that the base board is firmly seated in the chas...

  • Page 308: H.5

    Error messages page h-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 h.5 vbi related errors table h.3: vbi error messages error message action to take duplicate vbi pid invalid vbi pid duplicate teletext pid invalid teletext pid check the encoder configuratio...

  • Page 309: H.8

    Error messages instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page h-7 st.Tm.E10076.3 h.8 video encoder related errors table h.6: video encoder error messages error message action to take comms error config update vcm stopped power encoder off, then check that the base board ...

  • Page 310

    Error messages page h-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 error message action to take level clipping left level clipping right audio input level on the reported channel is too high and is being clipped. Reduce the audio input level. Embedded sourc...

  • Page 311: H.11  Remux Related Errors

    Error messages instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page h-9 st.Tm.E10076.3 h.11 remux related errors table h.9: remux error messages error message action to take overflow on input 1 overflow on input 2 overflow on input 3 reduce incoming bit-rate. Overflow motherbo...

  • Page 312

    Error messages page h-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 313

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page i-1 st.Tm.E10076.3 annex i i. Accuracy of frequency sources this equipment is based around iso/iec 13818 specifications (commonly known as mpeg-2) and within these specifications all timing is derived from a 27 mhz system cl...

  • Page 314

    Accuracy of frequency sources page i-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 315: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page j-1 st.Tm.E10076.3 annex j j. Use of remux card in astc contents j.1 remux card in atsc with internal psip ................. J-3 j.2 remux card in atsc with external psip................ J-3.

  • Page 316

    Use of remux card in astc page j-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 317: J.1

    Use of remux card in astc page j-3 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 j.1 remux card in atsc with internal psip the encoder automatically remuxes atsc streams arriving at its inputs, as in dvb. The encoder uses the pat (program association table) an...

  • Page 318

    Use of remux card in astc page j-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 in this configuration the encoder generates the pat, cat and pmt for all programs but it is the responsibility of the user to provide all the psip for the associated programs. Any...

  • Page 319: Contents

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page k-1 st.Tm.E10076.3 annex k k. Edh capability for e57xx encoders contents k.1 edh capability for e57xx encoders..........................K-3 list of tables table k.1: edh capability matrix for e57xx encoders.....................

  • Page 320

    Edh capability for e57xx encoders page k-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 321: K.1

    Edh capability for e57xx encoders instruction manual: evolution 5000 e57xx dsng and deng voyager encoder page k-3 st.Tm.E10076.3 k.1 edh capability for e57xx encoders table k.1 contains edh capability for different mux firmware versions. To find the mux firmware version for a particular encoder refe...

  • Page 322

    Edh capability for e57xx encoders page k-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 blank.

  • Page 323

    Instruction manual: evolution 5000 e57xx dsng and deng voyager encoder index-1 st.Tm.E10076.3 indexes this section is split into two parts. The first is the general index and the second is devoted to setup menus and associated options. The following conventions are used in this manual: a page number...

  • Page 324

    Indexes index-2 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 b background colour option, 4-34 backup configurations, 4-120 band plan option, 4-72 band plans, f-3, g-4 countries, f-3 manual option, f-3 bandwidth option, 4-45, 4-73, 4-86 basic interoperable scr...

  • Page 325

    Indexes instruction manual: evolution 5000 e57xx dsng and deng voyager encoder index-3 st.Tm.E10076.3 dolby digital ac-3, 1-12 dolby srnd mode option, 4-60 dst end date atsc, 4-21 dst start date atsc, 4-21 dynamic range option, 4-62 e earth protective, 2-8 technical, 2-8, 2-13 earthing, 2-7, 2-9 ecm...

  • Page 326

    Indexes index-4 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 changing from the front panel menus, 2-22 methods of changing, 2-21 ip address option, 2-22, 4-24 ip output card option, 3-27 ird mode option, 4-104 ird ts source option, 4-104 k keyboard lock (soft...

  • Page 327

    Indexes instruction manual: evolution 5000 e57xx dsng and deng voyager encoder index-5 st.Tm.E10076.3 option modules, b-20 16qam demodulator option, 3-26 additional audio input module, 3-6 basic interoperable scrambling system (biss), 3-5 hardware, 3-3 how to see which are fitted/enabled, 3-5 ip out...

  • Page 328

    Indexes index-6 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 sabus data bits option, 4-26 sat deliv freq option, 4-82, 4-85 sat orb pos option, 4-82, 4-85 sat west east option, 4-82 sat west/east option, 4-85 scramble option, 4-94 scrambling remote authorisat...

  • Page 329

    Indexes instruction manual: evolution 5000 e57xx dsng and deng voyager encoder index-7 st.Tm.E10076.3 transport stream id option, 4-23 ts pkts/udp frm option, 4-88 tt7000 system manager, 4-29 tx bandwidth factor option, 4-81, 4-84 tx bandwidth option, 4-81, 4-84 type of service option, 4-89 u univer...

  • Page 330

    Indexes index-8 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 setup menus and associated options index 1 1.Service menu audio (mpeg-2) option, 4-103 biss key code option, 4-101 ca input option, 4-100 data (type of data) option, 4-103 ecm (ca) pid option, 4-102...

  • Page 331

    Indexes instruction manual: evolution 5000 e57xx dsng and deng voyager encoder index-9 st.Tm.E10076.3 config name, 4-26 fan control, 4-28 keypress beep option, 4-27 local date, 4-26 local time, 4-26 model number, 4-26 power dip recovery option, 4-27 screen saver, 4-27 software release, 4-28 temperat...

  • Page 332

    Indexes index-10 instruction manual: evolution 5000 e57xx dsng and deng voyager encoder st.Tm.E10076.3 r remote control menu, 4-24 gateway address, 4-24 ip address, 4-24 last snmp master, 4-25 last snmp poll, 4-25 mac address, 4-24 network mask, 4-24 sabus address, 4-25 sabus baud rate, 4-25 sabus d...