Printed in korea part no. 942667020001 - 01 tft-lcd color monitor fs-l4201c user manual english www.Tandberg.Net.
Parts 3 connection to signal source 4 out drawing of product 6 name and function 7 power management feature 8 adjusting osd 10 standard signal table 12 pin assignment table of signal connector 13 specification 15 troubleshooting 16 warning 18 information to user : this equipment has been tested and ...
Basic connection ac inlet. Ac on/ off switch rca coaxial s/pdif audio input 9 pin d-sub connector for speaker out 24 pin dvi connector for digital tmds 15 pin d-sub connector for analog rgb user's manual 42 " lcd monitor parts connection to signal source lcd monitor user s manual 3 lcd monitor user ...
1. Use 220 v or 110 v. (free voltage) 2. Connect monitor and signal source via signal cable 3. Power on the monitor and computer. 4. Connection is finished. D-sub analog(data in) dvi digital coaxial s/pdif input audio amp output o ut drawing of product lcd monitor user s manual 5 lcd monitor user s ...
Lcd monitor user s manual 7 lcd monitor user s manual 8 front side + button - button source button menu button ok button button button name and function rear side remote signal window power indicating led power management feature power management system of this monitor can not be corresponded with v...
English - 10 9 - english lcd monitor user s manual 9 lcd monitor user s manual 10 remote signal wirdow this window is for the receiving signal from remote controller do not hide this window. Power indicating led green : normal mode red : standby mode on-screen display (osd) function button menu : wi...
Lcd monitor user s manual 11 lcd monitor user s manual 12 (640 x 480) (640 x 480) (640 x 480) (640 x 480) (800 x 600) (800 x 600) (800 x 600) (800 x 600) (800 x 600) (800 x 600) (1024 x 768) (1024 x 768) (1024 x 768) (1280 x 768) (1280 x 720) (1280 x 720) (1280 x 1024) (1366 x768) 31.5 37.9 37.5 43....
Lcd monitor user s manual 13 lcd monitor user s manual 14 1 5 6 9 9 pin d-sub pin no. Assignment 1 ground 2 speaker id4 3 speaker id3 4 speaker id2 5 speaker id1 6 speaker out left- 7 speaker out left+ 8 speaker out right- 9 speaker out right 1 5 11 15 6 10 15pin d-sub pin no. Assignment pin no. Ass...
Lcd monitor user s manual 15 lcd monitor user s manual 16 adjust color at user mode in osd color temp menu. Color is irregular. Check the power connection. (refer to page 5) power led is dark. No picture. Power led is red check the signal cable or signal source. (refer to page 5) screen is not clear...
Lcd monitor user s manual 17 lcd monitor user s manual 18 warning to prevent damage or loss, please read this warning carefully. When connecting/disconnecting the plug, pull out the plug itself, and never pull the cord to prevent fire caused by short. To prevent electric shock, do not connect/dis- c...
19 - english.
