1. DL manuals
  2. TANDBERG
  3. Server
  4. TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6
  5. Command Reference Manual

TANDBERG TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6 Command Reference Manual

Summary of TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6

  • Page 1

    Cisco telepresence video communication server command reference d14754.01 january 2010 software version: x6.

  • Page 2: Contents

    Cisco vcs command reference (x6) page 2 of 95 contents introduction 3 using the command line interface (cli) 3 cli command types 3 xconfiguration command reference 4 xconfiguration commands 4 xcommand command reference 58 xcommand commands 58 xstatus command reference 77 xstatus elements 77 restorin...

  • Page 3: Introduction

    Introduction cisco vcs command reference (x6) page 3 of 95 introduction this command reference document provides supplementary information regarding the administration of the cisco telepresence video communication server (cisco vcs). It includes: n details of the commands available through the cisco...

  • Page 4

    Xconfiguration command reference cisco vcs command reference (x6) page 4 of 95 xconfiguration command reference the xconfiguration group of commands are used to set and change individual items of configuration. Each command is made up of a main element followed by one or more sub-elements. The follo...

  • Page 5

    Xconfiguration command reference cisco vcs command reference (x6) page 5 of 95 administration http mode: determines whether http calls will be redirected to the https port. On: calls will be redirected to https. Off: no http access will be available. Note: you must restart the system for any changes...

  • Page 6

    Xconfiguration command reference cisco vcs command reference (x6) page 6 of 95 alternates cluster name: the fully qualified domain name used in srv records that address this vcs cluster, for example "cluster1.Example.Com". The name can only contain letters, digits, hyphens and underscores. Warning: ...

  • Page 7

    Xconfiguration command reference cisco vcs command reference (x6) page 7 of 95 applications external status [1..10] name:.

  • Page 8

    Xconfiguration command reference cisco vcs command reference (x6) page 8 of 95 applications presence user agent retrydelta: specifies the time (in seconds) after which the presence user agent will attempt to resend a publish to the presence server. This will occur if the original attempt failed due ...

  • Page 9

    Xconfiguration command reference cisco vcs command reference (x6) page 9 of 95 authentication ads spnego: indicates if spnego (simple and protected gssapi negotiation mechanism) is used when the client (the vcs) authenticates with the server (the ad domain controller). Default: enabled example: xcon...

  • Page 10

    Xconfiguration command reference cisco vcs command reference (x6) page 10 of 95 authentication username: the username used by the vcs when authenticating with another system. Note: this does not apply to traversal client zones. Example: xconfiguration authentication username: "vcs123" bandwidth defa...

  • Page 11

    Xconfiguration command reference cisco vcs command reference (x6) page 11 of 95 bandwidth pipe [1..1000] bandwidth percall limit: if this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call. Default: 1920 example: xconfiguration bandwidth pi...

  • Page 12

    Xconfiguration command reference cisco vcs command reference (x6) page 12 of 95 call services callstounknownipaddresses: determines the way in which the vcs will attempt to call systems which are not registered with it or one of its neighbors. Direct: allows an endpoint to make a call to an unknown ...

  • Page 13

    Xconfiguration command reference cisco vcs command reference (x6) page 13 of 95 ethernet [1..2] ip v4 staticnat address:.

  • Page 14

    Xconfiguration command reference cisco vcs command reference (x6) page 14 of 95 h323 gatekeeper autodiscovery mode: determines whether or not the vcs responds to gatekeeper discovery requests from endpoints. Default: on example: xconfiguration h323 gatekeeper autodiscovery mode: on h323 gatekeeper c...

  • Page 15

    Xconfiguration command reference cisco vcs command reference (x6) page 15 of 95 h323 gateway callerid: specifies whether the prefix of the isdn gateway is inserted into the caller's e.164 number presented on the destination endpoint. Including the prefix allows the recipient to directly return the c...

  • Page 16

    Xconfiguration command reference cisco vcs command reference (x6) page 16 of 95 ip dns hostname : defines the dns host name that this system is known by. Note that this is not the fully-qualified domain name, just the host label portion. The name can only contain letters, digits, hyphens and undersc...

  • Page 17

    Xconfiguration command reference cisco vcs command reference (x6) page 17 of 95 ip route [1..50] address: specifies an ip address used in conjunction with the prefix length to determine the network to which this route applies. Example: xconfiguration ip route 1 address: "128.168.0.0" ip route [1..50...

  • Page 18

    Xconfiguration command reference cisco vcs command reference (x6) page 18 of 95 ldap server port: sets the ip port of the ldap server to use when making ldap queries. Typically, non-secure connections use 389 and secure connections use 636. Default: 389 example: xconfiguration ldap server port: 389 ...

  • Page 19

    Xconfiguration command reference cisco vcs command reference (x6) page 19 of 95 login remote ldap basedn accounts: sets the distinguished name to use as the base when searching for administrator and user accounts. Example: xconfiguration login remote ldap basedn accounts: "ou=useraccounts,dc=corpora...

  • Page 20

    Xconfiguration command reference cisco vcs command reference (x6) page 20 of 95 login remote ldap server fqdnresolution: sets how the ldap server address is resolved if specified as an fqdn. Addressrecord: dns a or aaaa record lookup. Srvrecord: dns srv record lookup. Default: addressrecord example:...

  • Page 21

    Xconfiguration command reference cisco vcs command reference (x6) page 21 of 95 login user source: defines where user login credentials are authenticated before access is allowed to the vcs. Remote: credentials are verified against an external credentials directory, for example windows active direct...

  • Page 22

    Xconfiguration command reference cisco vcs command reference (x6) page 22 of 95 policy administratorpolicy service server [1..3] address: specifies the ip address or fully qualified domain name (fqdn) of the remote service. Example: xconfiguration policy administratorpolicy service server 1 address:...

  • Page 23

    Xconfiguration command reference cisco vcs command reference (x6) page 23 of 95 policy findme server path: specifies the url of the remote findme manager. Example: xconfiguration policy findme server path: "service" policy findme server protocol: specifies the protocol used to connect to the remote ...

  • Page 24

    Xconfiguration command reference cisco vcs command reference (x6) page 24 of 95 policy services service [1..5] server [1..3] address: specifies the ip address or fully qualified domain name (fqdn) of the remote service. Example: xconfiguration policy services service 1 server 1 address: "192.168.0.0...

  • Page 25

    Xconfiguration command reference cisco vcs command reference (x6) page 25 of 95 registration denylist [1..2500] pattern string: specifies an entry to be added to the deny list. If one of an endpoint’s aliases matches one of the patterns in the deny list, the registration will not be permitted. Examp...

  • Page 26

    Xconfiguration command reference cisco vcs command reference (x6) page 26 of 95 registration restrictionpolicy service server [1..3] address: specifies the ip address or fully qualified domain name (fqdn) of the remote service. Example: xconfiguration registration restrictionpolicy service server 1 ...

  • Page 27

    Xconfiguration command reference cisco vcs command reference (x6) page 27 of 95 sip authentication digest nonce maximum use count: maximum number of times that a nonce generated by the vcs may be used by a client. Default: 128 example: xconfiguration sip authentication digest nonce maximum use count...

  • Page 28

    Xconfiguration command reference cisco vcs command reference (x6) page 28 of 95 services advancedmediagateway policy rules rule [1..200] pattern type: the way in which the pattern must match either the source or destination alias of the call. Exact: the entire pattern string must exactly match the a...

  • Page 29

    Xconfiguration command reference cisco vcs command reference (x6) page 29 of 95 sip registration expiredelta: specifies the period (in seconds) within which a sip endpoint must re-register with the vcs to prevent its registration expiring. Default: 60 example: xconfiguration sip registration expired...

  • Page 30

    Xconfiguration command reference cisco vcs command reference (x6) page 30 of 95 sip routes route [1..20] header pattern:.

  • Page 31

    Xconfiguration command reference cisco vcs command reference (x6) page 31 of 95 sip tcp mode: determines whether incoming and outgoing sip calls using the tcp protocol will be allowed. Default: on example: xconfiguration sip tcp mode: on sip tcp outbound port end: specifies the upper port in the ran...

  • Page 32

    Xconfiguration command reference cisco vcs command reference (x6) page 32 of 95 snmp mode: enables or disables snmp support. Default: off example: xconfiguration snmp mode: on snmp systemcontact: specifies the name of the person who can be contacted regarding issues with the vcs. Example: xconfigura...

  • Page 33

    Xconfiguration command reference cisco vcs command reference (x6) page 33 of 95 snmp v3 privacy password: sets snmp version 3 privacy password. Note: must be at least 8 characters. Example: xconfiguration snmp v3 privacy password: "password123" snmp v3 privacy type: sets snmp version 3 privacy type....

  • Page 34

    Xconfiguration command reference cisco vcs command reference (x6) page 34 of 95 systemunit strictpassword enforce: determines whether or not administrator passwords must meet a certain level of complexity before they are accepted. Default: off example: xconfiguration systemunit strictpassword enforc...

  • Page 35

    Xconfiguration command reference cisco vcs command reference (x6) page 35 of 95 transform [1..100] priority: assigns a priority to the specified transform. Transforms are compared with incoming aliases in order of priority, and the priority must be unique for each transform. Default: 1 example: xcon...

  • Page 36

    Xconfiguration command reference cisco vcs command reference (x6) page 36 of 95 traversal server turn authentication realm: the realm sent by the server in its authentication challenges. Default: tandberg example: xconfiguration traversal server turn authentication realm: "tandberg" traversal server...

  • Page 37

    Xconfiguration command reference cisco vcs command reference (x6) page 37 of 95 zones localzone defaultsubzone bandwidth percall inter limit: specifies the bandwidth limit (in kbps) for any one call to or from an endpoint in the default subzone (applies only if the mode is set to limited). Default: ...

  • Page 38

    Xconfiguration command reference cisco vcs command reference (x6) page 38 of 95 zones localzone subzones membershiprules rule [1..3000] description: a free-form description of the membership rule. Example: xconfiguration zones localzone subzones membershiprules rule 1 description: "office-based staf...

  • Page 39

    Xconfiguration command reference cisco vcs command reference (x6) page 39 of 95 zones localzone subzones membershiprules rule [1..3000] subnet prefixlength: the number of bits of the subnet address which must match for an ip address to belong in this subnet. Default: 32 example: xconfiguration zones...

  • Page 40

    Xconfiguration command reference cisco vcs command reference (x6) page 40 of 95 zones localzone subzones subzone [1..1000] bandwidth percall intra mode: determines whether there is a limit on the bandwidth for any one call between two endpoints within this subzone. Nobandwidth: no bandwidth availabl...

  • Page 41

    Xconfiguration command reference cisco vcs command reference (x6) page 41 of 95 zones localzone traversal h323 h46019 demultiplexing mode: determines whether the vcs will operate in demultiplexing mode for calls from traversal-enabled endpoints registered directly with it. On: allows use of the same...

  • Page 42

    Xconfiguration command reference cisco vcs command reference (x6) page 42 of 95 zones localzone traversal h323 udpprobe retryinterval: sets the frequency (in seconds) with which traversal-enabled endpoints registered directly with the vcs will send a udp probe to the vcs. Default: 2 example: xconfig...

  • Page 43

    Xconfiguration command reference cisco vcs command reference (x6) page 43 of 95 zones policy searchrules rule [1..2000] description: a free-form description of the search rule. Example: xconfiguration zones policy searchrules rule 1 description: "send query to the dns zone" zones policy searchrules ...

  • Page 44

    Xconfiguration command reference cisco vcs command reference (x6) page 44 of 95 zones policy searchrules rule [1..2000] priority: the order in the search process that this rule is applied, when compared to the priority of the other search rules. All priority 1 search rules are applied first, followe...

  • Page 45

    Xconfiguration command reference cisco vcs command reference (x6) page 45 of 95 zones zone [1..1000] dns interworking sip audio defaultcodec: g722_64/g722_1_16/g722_1_24/g722_1_32/g722_1_48/g723_1/g728/g729/aalcd_48/aalcd_56/ aalcd_64/amr> specifies which audio codec to use when empty invites are no...

  • Page 46

    Xconfiguration command reference cisco vcs command reference (x6) page 46 of 95 zones zone [1..1000] dns sip poison mode: determines whether sip requests sent out to this zone will be "poisoned" such that if they are received by the local vcs again they will be rejected. On: sip requests sent out vi...

  • Page 47

    Xconfiguration command reference cisco vcs command reference (x6) page 47 of 95 zones zone [1..1000] dns sip udp bfcp filter mode: determines whether invite requests sent to this zone filter out udp/bfcp. This option may be required to enable interoperability with sip devices that do not support the...

  • Page 48

    Xconfiguration command reference cisco vcs command reference (x6) page 48 of 95 zones zone [1..1000] neighbor authentication mode: controls how the vcs authenticates incoming messages from this zone and whether they are subsequently treated as authenticated, unauthenticated, or are rejected. The beh...

  • Page 49

    Xconfiguration command reference cisco vcs command reference (x6) page 49 of 95 zones zone [1..1000] neighbor interworking sip video defaultbitrate: specifies which video bitrate to use when empty invites are not allowed. Default: 384 example: xconfiguration zones zone 3 neighbor interworking sip vi...

  • Page 50

    Xconfiguration command reference cisco vcs command reference (x6) page 50 of 95 zones zone [1..1000] neighbor sip duo video filter mode: determines whether invite requests sent to this zone filter out duo video. This option may be required to enable interoperability with sip devices that do not supp...

  • Page 51

    Xconfiguration command reference cisco vcs command reference (x6) page 51 of 95 zones zone [1..1000] neighbor sip port: specifies the port on the neighbor to be used for sip calls to and from this vcs. Default: 5061 example: xconfiguration zones zone 3 neighbor sip port: 5061 zones zone [1..1000] ne...

  • Page 52

    Xconfiguration command reference cisco vcs command reference (x6) page 52 of 95 zones zone [1..1000] neighbor sip tls verify mode: controls x.509 certificate checking and mutual authentication for inbound and outbound connections between this vcs and the neighbor system. When enabled, the neighbor s...

  • Page 53

    Xconfiguration command reference cisco vcs command reference (x6) page 53 of 95 zones zone [1..1000] traversalclient authentication mode: controls how the vcs authenticates incoming messages from this zone and whether they are subsequently treated as authenticated, unauthenticated, or are rejected. ...

  • Page 54

    Xconfiguration command reference cisco vcs command reference (x6) page 54 of 95 zones zone [1..1000] traversalclient sip poison mode: determines whether sip requests sent out to this zone will be "poisoned" such that if they are received by the local vcs again they will be rejected. On: sip requests...

  • Page 55

    Xconfiguration command reference cisco vcs command reference (x6) page 55 of 95 zones zone [1..1000] traversalserver authentication username: the name used by the traversal client when authenticating with the traversal server. If the traversal client is a vcs, this must be the vcs’s authentication u...

  • Page 56

    Xconfiguration command reference cisco vcs command reference (x6) page 56 of 95 zones zone [1..1000] traversalserver sip protocol: determines which firewall traversal protocol will be used for sip calls to and from the traversal client. Note: the same protocol must be set on the client for calls to ...

  • Page 57

    Xconfiguration command reference cisco vcs command reference (x6) page 57 of 95 zones zone [1..1000] traversalserver udpprobe retrycount: sets the number of times the traversal client will attempt to send a udp probe to the vcs. Default: 5 example: xconfiguration zones zone 5 traversalserver udpprob...

  • Page 58: Xcommand Command Reference

    Xcommand command reference cisco vcs command reference (x6) page 58 of 95 xcommand command reference the xcommand group of commands are used to add and delete items and issue system commands. The following section lists all the currently available xcommand commands. To issue a command, type the comm...

  • Page 59

    Xcommand command reference cisco vcs command reference (x6) page 59 of 95 amgwpolicyruledelete deletes an advanced media gateway policy rule. Amgwpolicyruleid(r): the index of the advanced media gateway policy rule to be deleted. Example: xcommand amgwpolicyruledelete amgwpolicyruleid: 1 adminaccoun...

  • Page 60

    Xcommand command reference cisco vcs command reference (x6) page 60 of 95 adsdcadd adds a new active directory server. Activedirectoryaddress(r): the address of a domain controller that can be used when the vcs joins the ad domain. Not specifying a specific ad will result the use of dns srv queries ...

  • Page 61

    Xcommand command reference cisco vcs command reference (x6) page 61 of 95 allowlistdelete deletes an entry from the allow list. Allowlistid(r): the index of the entry to be deleted. Example: xcommand allowlistdelete allowlistid: 2 boot reboots the vcs. This command has no parameters. Example: xcomma...

  • Page 62

    Xcommand command reference cisco vcs command reference (x6) page 62 of 95 credentialadd adds an entry to the local authentication database. Credentialname(r): defines the name for this entry in the local authentication database. Credentialpassword(r): defines the password for this entry in the local...

  • Page 63

    Xcommand command reference cisco vcs command reference (x6) page 63 of 95 denylistdelete deletes an entry from the deny list. Denylistid(r): the index of the entry to be deleted. Example: xcommand denylistdelete denylistid: 2 disconnectcall disconnects a call. Call: the index of the call to be disco...

  • Page 64

    Xcommand command reference cisco vcs command reference (x6) page 64 of 95 extappstatusdelete deletes an external application status entry. Note: this command is intended for developer use only. Name(r):.

  • Page 65

    Xcommand command reference cisco vcs command reference (x6) page 65 of 95 linkadd adds and configures a new link. Linkname(r): assigns a name to this link. Node1: specifies the first zone or subzone to which this link will be applied. Node2: specifies the second zone or subzone to which this link wi...

  • Page 66

    Xcommand command reference cisco vcs command reference (x6) page 66 of 95 locate runs the vcs's location algorithm to locate the endpoint identified by the given alias, searching locally, on neighbors, and on systems discovered through the dns system, within the specified number of 'hops'. Results a...

  • Page 67

    Xcommand command reference cisco vcs command reference (x6) page 67 of 95 optionkeydelete deletes a software option key from the vcs. Optionkeyid(r): specifies the id of the software option to be deleted. Example: xcommand optionkeydelete optionkeyid: 2 pipeadd adds and configures a new pipe. Pipena...

  • Page 68

    Xcommand command reference cisco vcs command reference (x6) page 68 of 95 policyserviceadd adds a policy service. Name(r): assigns a name to this policy service. Description: a free-form description of the policy service. Protocol: specifies the protocol used to connect to the remote service. Defaul...

  • Page 69

    Xcommand command reference cisco vcs command reference (x6) page 69 of 95 removeregistration removes a registration from the vcs. Registration: the index of the registration to be removed. Registrationserialnumber: the serial number of the registration to be removed. Example: xcommand removeregistra...

  • Page 70

    Xcommand command reference cisco vcs command reference (x6) page 70 of 95 searchruleadd adds a new search rule to route searches and calls toward a zone or policy service. Name(r): descriptive name for the search rule. Zonename: the zone or policy service to query if the alias matches the search rul...

  • Page 71

    Xcommand command reference cisco vcs command reference (x6) page 71 of 95 siprouteadd adds a route that will cause sip messages matching the given criteria to be forwarded to the specified ip address and port. Note: this command is intended for developer use only. Method(r):.

  • Page 72

    Xcommand command reference cisco vcs command reference (x6) page 72 of 95 subzoneadd adds and configures a new subzone. Subzonename(r): assigns a name to this subzone. Totalmode: determines whether this subzone has a limit on the total bandwidth of calls being used by its endpoints at any one time. ...

  • Page 73

    Xcommand command reference cisco vcs command reference (x6) page 73 of 95 subzonemembershipruleadd adds and configures a new membership rule. Name(r): assigns a name to this membership rule. Type(r): the type of address that applies to this rule. Subnet: assigns the device if its ip address falls wi...

  • Page 74

    Xcommand command reference cisco vcs command reference (x6) page 74 of 95 transformadd adds and configures a new transform. Pattern(r): specifies the pattern against which the alias is compared. Type: how the pattern string must match the alias for the transform to be applied. Exact: the entire stri...

  • Page 75

    Xcommand command reference cisco vcs command reference (x6) page 75 of 95 userlogingroupdelete deletes a user login group. Userlogingroupid(r): the index of the user login group to be deleted. Example: xcommand userlogingroupdelete userlogingroupid: 1 warningacknowledge acknowledges an existing warn...

  • Page 76

    Xcommand command reference cisco vcs command reference (x6) page 76 of 95 zonedelete deletes a zone. Zoneid(r): the index of the zone to be deleted. Example: xcommand zonedelete zoneid: 2 zonelist a diagnostic tool that returns the list of zones (grouped by priority) that would be queried, and any t...

  • Page 77: Xstatus Command Reference

    Xstatus command reference cisco vcs command reference (x6) page 77 of 95 xstatus command reference the xstatus group of commands are used to return information about the current status of the system. Each xstatus element returns information about one or more sub-elements. The following section lists...

  • Page 78

    Xstatus command reference cisco vcs command reference (x6) page 78 of 95 address: port: laststatuschange: applications applications: presence: useragent: status: presentity: count: server: publications: presentities: count: max: presentity [1..10000]: uri: document: count: subscriptions: subscribers...

  • Page 79

    Xstatus command reference cisco vcs command reference (x6) page 79 of 95 registration: state: presence: ocs: machine: state: user: state: vcs: state: lastupdate: time: secondssincelastrefresh: calls calls: call : serialnumber: tag: state: starttime: duration: legs: leg [1..300]: protocol: h323: {vis...

  • Page 80

    Xstatus command reference cisco vcs command reference (x6) page 80 of 95 callrouted: participants: leg: {2 entries} bandwidth: requested: kbps allocated: kbps route: zone/link: {0..150 entries} media {visible if mediarouted = true} channels channel [1..N] type: protocol: {rtp payload type} rate: bps...

  • Page 81

    Xstatus command reference cisco vcs command reference (x6) page 81 of 95 findmemanager findmemanager: mode: status: {visible if remote} address: {visible if remote} h323 h323: registration: status: ipv4: {visible if status=active} address: {1..2 entries} ipv6: {visible if status=active} address: {1....

  • Page 82

    Xstatus command reference cisco vcs command reference (x6) page 82 of 95 ldap: status: cause: {visible if status is failed} server does not support tls. / failed to establish a tls connection to the ldap server. Please check that the ldap server certificate is signed by a ca, and that ca is included...

  • Page 83

    Xstatus command reference cisco vcs command reference (x6) page 83 of 95 pipes: pipe [1..1000]: name: bandwidth: localusage: clusterusage: calls: call [0..900]: {0..900 entries} callid: policy policyservices: policyservice [1..5]: name: status: url: lastused: peers: peer [1..3]: host: status: reason...

  • Page 84

    Xstatus command reference cisco vcs command reference (x6) page 84 of 95 aor: contact: path: uri [1..10]: resourceusage resourceusage: calls: traversal: current: max: total: nontraversal: current: max: total: registrations: current: max: total: turn: relays: current: max: total: sip sip: ethernet [1...

  • Page 85

    Xstatus command reference cisco vcs command reference (x6) page 85 of 95 systemunit systemunit: product: tandberg vcs uptime: systemtime: timezone: localtime: software: version: x build: name: “release” releasedate: releasekey configuration: nontraversalcalls: traversalcalls: registrations: expressw...

  • Page 86

    Xstatus command reference cisco vcs command reference (x6) page 86 of 95 peer: address: creationtime: expiretime: counters: received: requests: total: allocate: refresh: permission: channelbind: sent: responses: total: allocate: refresh: permission: channelbind: errors: total: allocate: refresh: per...

  • Page 87

    Xstatus command reference cisco vcs command reference (x6) page 87 of 95 name: “defaultzone” bandwidth: localusage: clusterusage: calls: {visible only if there are calls} call [0..900]: {0..900 entries} callid: localzone: defaultsubzone: name: “defaultsubzone” bandwidth: localusage: clusterusage: re...

  • Page 88

    Xstatus command reference cisco vcs command reference (x6) page 88 of 95 cause: {visible if status is failed or warning} unreachable> type: neighbor: {visible if type is neighbor} peer [1..6]: h323: {visible if h323 mode=on for zone} status: cause: {visible if status is failed} resolution failed/inv...

  • Page 89

    Xstatus command reference cisco vcs command reference (x6) page 89 of 95 laststatuschange: calls: {0..900 entries} call [0..900]: callid:.

  • Page 90

    Restoring default configuration cisco vcs command reference (x6) page 90 of 95 restoring default configuration it is possible to restore the cisco vcs to its default configuration. This is done through the cli using xcommand defaultvaluesset . This command is not available through the web interface....

  • Page 91

    Restoring default configuration cisco vcs command reference (x6) page 91 of 95 configuration item reset value ip dns hostname ip dns server [1..5] address ip gateway 127.0.0.1 ip route [1..50] address ip route [1..50] gateway ip route [1..50] interface auto ip route [1..50] prefixlength 32 ip v6 gat...

  • Page 92

    Restoring default configuration cisco vcs command reference (x6) page 92 of 95 configuration item reset value login administrator groups group [1..30] access readwrite login administrator groups group [1..30] name login administrator source local login remote ldap basedn accounts login remote ldap b...

  • Page 93: Policy Services

    Policy services cisco vcs command reference (x6) page 93 of 95 policy services policy services are typically used in large-scale deployments where policy decisions can be managed through an external, centralized service rather than by configuring policy rules on the cisco vcs itself. You can configu...

  • Page 94

    Policy services cisco vcs command reference (x6) page 94 of 95 parameter name values registration policy search rules call policy traversal_type type_[undef / assentserver / assentclient / h460server / h460client / turnserver / turnclient / ice] x x unauthenticated_ source_alias x x utctime x x x zo...

  • Page 95

    Cisco vcs command reference (x6) page 95 of 95 the specifications and information regarding the products in this manual are subject to change without notice. All statements, information, and recommendations in this manual are believed to be accurate but are presented without warranty of any kind, ex...