TANDBERG TRC 4 Quick Reference Manual - page 2
Qu
ick R
e
fe
re
n
c
e G
u
id
e T
R
C
4
D14896.01 Oct. 2011
Picking up the remote control activates the system. The system
will automatically go to Standby mode when it is not in use. It is,
however, still possible to receive incoming calls.
Press the Mic off key on the remote control. A mute icon will
appear in the top right of the screen.
Press the Mic off key on the remote control. The mute icon will
disappear from the screen.
When the menu is closed, use the arrow keys on the remote control
to control your camera.
If the menu is displayed, choose the Camera Control facility in the
menu and press OK to control the camera.
Press OK when done.
Use the Zoom key to zoom the image in and out.
Dial a number and press the green Call key to place a call. You can
also use the Phone Book facility to select contacts to call.
To accept an incoming call, press “OK” or the green Call key on the
remote control. Press the red End Call key to reject an incoming
call.
Press the red End Call key to end a call. Press the red key again or
press OK
to confirm.
Press the Presentation key to show your PC (default).
Press again to switch back to Main Camera (default).
To select other video sources, select the Presentation
facility in the menu.
Use the Volume key to increase or decrease the volume. A volume
bar appears at the top of the screen.
How to:
• Activate the system
• Mute the microphone
• Control your camera*
• Place a call
• Answer an incoming call
• End a call
• Select your video source*
• Adjust the volume
• Help desk contact information
* Not available on all video systems.