1. DL manuals
  2. TANDBERG
  3. Receiver
  4. TT1220
  5. Instruction Manual

TANDBERG TT1220 Instruction Manual

Manual is about: MPEG-2 DVB IRD Professional Receivers and Decoders, Software Version 3.0.0 (and later)

Summary of TT1220

  • Page 1

    St.Tm.Tt1220.4 issue 4 english (uk) tt1220 mpeg-2 dvb ird instruction manual tt1220 professional receivers and decoders software version 3.0.0 (and later) tt1220 common interface, nds, bskyb and tandberg director versions.

  • Page 2

    Preliminary pages page ii instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 issue 4 first published in 2005 by: t andberg t elevision l td r egistered a ddress : u nit 2 s trategic p ark , c omines w ay , h edge e nd , s outhampton , h ampshire , so30 4da u nited k ingdom...

  • Page 3: List of Contents

    Preliminary pages instruction manual: tt1220 professional receivers and decoders page iii st.Tm.Tt1220.4 list of contents chapter 1: introduction this chapter describes the purpose of the tt1220 in a typical system, provides a summary of its main features and identifies the controls. Chapter 2: inst...

  • Page 4: About This Manual

    Preliminary pages page iv instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 about this manual introduction this manual provides instructions and information for the installation and operation of the tt1220 range of decoders. It should be kept in a safe place for reference...

  • Page 5: Notice

    Preliminary pages instruction manual: tt1220 professional receivers and decoders page v st.Tm.Tt1220.4 notice this product incorporates copyright protection technology that is protected by u.S. Patents and other intellectual property rights. Use of this copyright protection technology must be author...

  • Page 6: Contact Information

    Preliminary pages page vi instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 contact information tandberg television customer services support services our primary objective is to provide first class customer care that is tailored to your specific business and operational ...

  • Page 7: Technical Training

    Preliminary pages instruction manual: tt1220 professional receivers and decoders page vii st.Tm.Tt1220.4 technical training training courses tandberg television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies. Tandberg c...

  • Page 8

    Preliminary pages page viii instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 9: Contents

    Instruction manual: tt1220 professional receivers and decoders page 1-1 st.Tm.Tt1220.4 chapter 1 1. Introduction contents 1.1 scope of this manual ............................................... 1-3 1.1.1 who should use this manual ...................... 1-3 1.1.2 what this manual describes............

  • Page 10

    Introduction page 1-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 11: 1.1

    Introduction instruction manual: tt1220 professional receivers and decoders page 1-3 st.Tm.Tt1220.4 1.1 scope of this manual 1.1.1 who should use this manual this manual is written for operators / users of the tandberg tt1220 range of professional receivers and decoders. It describes the unit’s func...

  • Page 12

    Introduction page 1-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 the tt1220 range offers the following features: • input choice single qpsk l-band rf input: or single cofdm rf input: or asi input, factory selectable mounting of a dvb-asi bnc input • front panel con...

  • Page 13: 1.2.2 Transport

    Introduction instruction manual: tt1220 professional receivers and decoders page 1-5 st.Tm.Tt1220.4 options 4 • transport stream output: one dvb-asi bnc output, user configured to provide a semi- descrambled output stream (selected service descrambled) • sdi video output: replaces one of the composi...

  • Page 14: 1.2.3 Outputs

    Introduction page 1-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 an optional (factory fitted) cofdm or an optional (factory fitted) dvb-asi bnc connector may be present, replacing the qpsk f-type connector. The cofdm input accepts a 6, 7 or 8 mhz uhf input, dependi...

  • Page 15: 1.3

    Introduction instruction manual: tt1220 professional receivers and decoders page 1-7 st.Tm.Tt1220.4 • ebu biss 5 (mode 0 and mode 1) further ca systems are available on the specific models: tandberg director version • tandberg director ca nds videoguard bskyb version • nds videoguard bskyb ca dvb ci...

  • Page 16: 1.4 Guided

    Introduction page 1-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 1.4 guided tour 1.4.1 construction the receiver is constructed using a screened fan-ventilated chassis. All operational inputs and outputs are via the rear panel connectors. The unit may be operated f...

  • Page 17: 1.4.3

    Introduction instruction manual: tt1220 professional receivers and decoders page 1-9 st.Tm.Tt1220.4 edit and save in the edit mode, when the correct value is in place, exit and save by pressing multiple times to the right, to move the cursor outside the edit area. When the cursor leaves the edit are...

  • Page 18: 1.4.5 Rear

    Introduction page 1-10 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 1.4.5 rear panel all input and output connectors are located on the rear panel. Connector descriptions are given in chapter 2, installing the equipment.

  • Page 19: Contents

    Instruction manual: tt1220 professional receivers and decoders page 2-1 st.Tm.Tt1220.4 chapter 2 2. Installing the equipment contents 2.1 read this first!.......................................................... 2-3 2.1.1 handling ....................................................... 2-3 2.1.2 in...

  • Page 20

    Installing the equipment page 2-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 list of tables table 2.1: fuse information........................................................... 2-7 table 2.2: supply cord wiring colours......................................... 2-8...

  • Page 21: 2.1

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-3 st.Tm.Tt1220.4 2.1 read this first! 2.1.1 handling the tt1220 must be handled and installed carefully and thoughtfully to prevent safety hazards and damage. 2.1.2 installing the equipment ensure that per...

  • Page 22: 2.3

    Installing the equipment page 2-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 2.3 installing the equipment 2.3.1 fixing the tt1220 is designed for fixed use only and has been shipped with fixing brackets suitable for a standard 19-inch rack. When installed in a rack...

  • Page 23: 2.3.3

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-5 st.Tm.Tt1220.4 2.3.3 installing cables – safety power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention ...

  • Page 24: 2.4

    Installing the equipment page 2-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 2.4 emc compliance statements 1 2.4.1 en 55022 this is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take...

  • Page 25: 2.5.2 Technical

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-7 st.Tm.Tt1220.4 warning… the tt1220 should only be operated from the type of power source indicated on the marking label. If you are not sure of the type to your business, consult your appliance dealer or...

  • Page 26: 2.5.4

    Installing the equipment page 2-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 when replacing the power cord in the usa, make sure to always replace it with a cord of the same type. The cord should be of type: feller type svt cord rated 3x18 awg with plug 498 g and a...

  • Page 27: 2.6 Signal

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-9 st.Tm.Tt1220.4 2.6 signal connections 2.6.1 general caution… it is strongly recommended that the technical earth terminal at the rear panel of the equipment be connected to a site technical earth before ...

  • Page 28

    Installing the equipment page 2-10 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 remote connector the rs-232 connector labelled remote on the back of the equipment allows for connection to a pc for remote control, software upload or debug purposes. The setup ⇒ advance...

  • Page 29

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-11 st.Tm.Tt1220.4 table 2.5: qpsk satellite receiver (l-band) connector item specification connector type f- type, female connector designation qpsk in, dc out pin: centre shield rf input ground / chassis ...

  • Page 30: 2.6.3 Output

    Installing the equipment page 2-12 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 2.6.3 output connectors analogue composite video output this is a pair 2 of bnc sockets, which provides an analogue composite video output. The default output standard is configured using...

  • Page 31

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-13 st.Tm.Tt1220.4 table 2.10: analogue audio connectors item specification connector type 9-way d-type, male connector designation audio output format balanced nominal output level 0 dbm in 600 Ω (0 dbu) a...

  • Page 32

    Installing the equipment page 2-14 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table 2.12: serial digital audio (s/pdif) connectors item specification connector type: 9-way d-type, male connector designation: audio 1 / 2 output format according to iec-60958 output l...

  • Page 33

    Installing the equipment instruction manual: tt1220 professional receivers and decoders page 2-15 st.Tm.Tt1220.4 alarm relay a 9-way d-type female connector is provided as an alarm / controlled relay mechanism. In the dvb ci or nds videoguard bskyb mounting, only relay one is active, indicating if t...

  • Page 34

    Installing the equipment page 2-16 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 35: Contents

    Instruction manual: tt1220 professional receivers and decoders page 3-1 st.Tm.Tt1220.4 chapter 3 3. Operating the equipment locally contents 3.1 powering the equipment........................................... 3-3 3.1.1 switching on ................................................ 3-3 3.1.2 front p...

  • Page 36

    Operating the equipment locally page 3-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 37: 3.1

    Operating the equipment locally instruction manual: tt1220 professional receivers and decoders page 3-3 st.Tm.Tt1220.4 3.1 powering the equipment 3.1.1 switching on connect the tt1220 to the signal inputs and the ac power supply and turn it on. There is a short boot period, while the display will be...

  • Page 38: 3.2

    Operating the equipment locally page 3-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 3.2 using the local controls 3.2.1 lcd menu overview - unlocking the menu a detailed lcd menu overview is given in annex c, menus. This chapter concentrates on describing the menus ...

  • Page 39: 3.3

    Operating the equipment locally instruction manual: tt1220 professional receivers and decoders page 3-5 st.Tm.Tt1220.4 3.3 setting up the input 3.3.1 setting up the qpsk input setting up the qpsk input is done entirely from the demod menu. Table 3.1 steps through all the necessary settings to achiev...

  • Page 40: 3.3.3

    Operating the equipment locally page 3-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 3.3.3 setting up the asi input tt1220 units delivered with an asi input are not input configurable. The asi input is autosensing 188/204 byte mode, and accept both byte and burst mo...

  • Page 41: 3.4.2

    Operating the equipment locally instruction manual: tt1220 professional receivers and decoders page 3-7 st.Tm.Tt1220.4 table 3.4: selecting a tv language step action result 1. Go to the tv comp. Menu, located under the setup menu. The display will read “set: tv comp.” on the top line. 2. Repeat pres...

  • Page 42: 3.4.3

    Operating the equipment locally page 3-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 3.4.3 selecting a data component the low-speed data output on the tt1220 is intended for, but not limited to, outputting data in the transport stream as rs-232 data information. In ...

  • Page 43

    Operating the equipment locally instruction manual: tt1220 professional receivers and decoders page 3-9 st.Tm.Tt1220.4 the output is configured for descrambling according to table 3.8. Table 3.8: configuring descrambled transport stream output step action result 1. Go to the system options menu, loc...

  • Page 44

    Operating the equipment locally page 3-10 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 45: Contents

    Instruction manual: tt1220 professional receivers and decoders page 4-1 st.Tm.Tt1220.4 chapter 4 4. Operating the equipment remotely contents 4.1 remote control......................................................... 4-3 4.1.1 introduction................................................... 4-3 4.1....

  • Page 46

    Operating the equipment remotely page 4-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 47: 4.1 Remote

    Operating the equipment remotely instruction manual: tt1220 professional receivers and decoders page 4-3 st.Tm.Tt1220.4 4.1 remote control 4.1.1 introduction the tt1220 can be remotely controlled in a variety of ways. The basic control methods are: • rs-232 control methods: ncompass control and moni...

  • Page 48: 4.1.4

    Operating the equipment remotely page 4-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table 4.1: configuring the communication parameters step action result 1. Go to the remote menu, located under the advanced, rs-232 setup submenu in the setup menu. The display wil...

  • Page 49: 4.1.5 Oac

    Operating the equipment remotely instruction manual: tt1220 professional receivers and decoders page 4-5 st.Tm.Tt1220.4 4.1.5 oac lockout overview once the unit is in oac control mode, it is possible for the remote control operator to issue a local lockout command to the receiver. This will effectiv...

  • Page 50: 4.3

    Operating the equipment remotely page 4-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 if the unit is controlled via tandberg director, a local lockout may be imposed. In this case, it is necessary to relinquish the lockout from the remote system, or to enter the loc...

  • Page 51: Contents

    Instruction manual: tt1220 professional receivers and decoders page 5-1 st.Tm.Tt1220.4 chapter 5 5. Alarms contents 5.1 alarm configuration .................................................. 5-3 5.1.1 alarm configuration of the tt1220 .............. 5-3 5.1.2 changing the alarm configuration ..........

  • Page 52

    Alarms page 5-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 53: 5.1 Alarm

    Alarms instruction manual: tt1220 professional receivers and decoders page 5-3 st.Tm.Tt1220.4 5.1 alarm configuration 5.1.1 alarm configuration of the tt1220 the tt1220 has a multitude of possible error conditions. All of these error conditions generate error messages, which are user configurable, a...

  • Page 54: 5.2

    Alarms page 5-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table 5.2: navigating the alarm configuration menus step action result 1. Go to the alarm setup menu, located under the advanced submenu in the setup menu. The display will read “adv: alarm setup” on the to...

  • Page 55: 5.3

    Alarms instruction manual: tt1220 professional receivers and decoders page 5-5 st.Tm.Tt1220.4 5.3 menu driven alarm indications once the tt1220 is in a warned or alarmed state, the easiest way for the user to diagnose the alarm condition is via the status menu. Table 5.3: navigating the alarm status...

  • Page 56

    Alarms page 5-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 57: Contents

    Instruction manual: professional receivers and decoders (ird) page 6-1 st.Tm.Tt1220.4 chapter 6 6. Preventive maintenance and fault- finding contents 6.1 routine checks......................................................... 6-3 6.1.1 cooling fan .................................................. 6...

  • Page 58

    Preventive maintenance and fault-finding page 6-2 instruction manual: professional receivers and decoders (ird) st.Tm.Tt1220.4 blank.

  • Page 59: 6.1 Routine

    Preventive maintenance and fault-finding instruction manual: professional receivers and decoders (ird) page 6-3 st.Tm.Tt1220.4 6.1 routine checks 6.1.1 cooling fan there are no routine checks associated with this equipment other than to ensure that the unit is adequately cooled. This equipment must ...

  • Page 60: 6.2.2 Replacement

    Preventive maintenance and fault-finding page 6-4 instruction manual: professional receivers and decoders (ird) st.Tm.Tt1220.4 6.2.2 replacement parts when replacement parts are required, be sure only parts specified by tandberg television (or having the same characteristics as the original part) ha...

  • Page 61: 6.3.4 Extended

    Preventive maintenance and fault-finding instruction manual: professional receivers and decoders (ird) page 6-5 st.Tm.Tt1220.4 6.3.4 extended warranty note… the above warranty is the basic warranty on tandberg television products. This warranty might be extended through a separate deal or purchase m...

  • Page 62: 6.5 Fault-Finding

    Preventive maintenance and fault-finding page 6-6 instruction manual: professional receivers and decoders (ird) st.Tm.Tt1220.4 ls communication baud rate data bits stop bits parity flow control 115200 8 1.0 none none ls output ts parse o/p format buffering payload bin flow 6.5 fault-finding 6.5.1 ge...

  • Page 63

    Instruction manual: tt1220 professional receivers and decoders page a-1 st.Tm.Tt1220.4 annex a a. Glossary the following list covers most of the abbreviations, acronyms and terms as used in tandberg television limited manuals. All terms may not be included in this manual. µm micrometre (former name ...

  • Page 64

    Glossary page a-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 b3zs bipolar with three zero substitution: a method of eliminating long zero strings in a transmission. It is used to ensure a sufficient number of transitions to maintain system synchronisation when the ...

  • Page 65

    Glossary instruction manual: tt1220 professional receivers and decoders page a-3 st.Tm.Tt1220.4 compression reduction in the number of bits used to represent the same information. For the purposes of a broadcast system, it is the process of reducing digital picture information by discarding redundan...

  • Page 66

    Glossary page a-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 ebu european broadcast union. Ecm entitlement control message. Edi ethernet data input eia electronics industries association (usa). Eit event information table: equipment: a component of the dvb-service ...

  • Page 67

    Glossary instruction manual: tt1220 professional receivers and decoders page a-5 st.Tm.Tt1220.4 interframe coding compression coding involving consecutive frames. When consecutive frames are compared, temporal redundancy is used to remove common elements (information) and arrive at difference inform...

  • Page 68

    Glossary page a-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 macroblock a 16x16-pixel area of the tv picture. Most processing within the mpeg domain takes place with macro blocks. These are converted to four 8x8 blocks using either frame dct or field dct. Four 8 x ...

  • Page 69

    Glossary instruction manual: tt1220 professional receivers and decoders page a-7 st.Tm.Tt1220.4 nvod near video on demand: method of offering multiple showings of movies or events. The showings are timed to start at set intervals, determined by the broadcaster. Each showing of a movie or event can b...

  • Page 70

    Glossary page a-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 programme a linking of one or more events under the control of a broadcaster. For example, football match, news, film show. In the mpeg-2 concept, the collection of elementary streams comprising the progr...

  • Page 71

    Glossary instruction manual: tt1220 professional receivers and decoders page a-9 st.Tm.Tt1220.4 single packet burst mode a burst of asi bytes (either 188 or 204, depending on packet length) is contiguously grouped into an mpeg-2 transport stream packet. Stuffing data is added between the packets to ...

  • Page 72

    Glossary page a-10 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 ups uninterruptable power supply: a method of supplying backup power when the electrical power fails or drops to an unacceptable voltage level. Small ups systems provide battery power for a few minutes; ...

  • Page 73: Contents

    Instruction manual: tt1220 professional receivers and decoders page b-1 st.Tm.Tt1220.4 annex b b. Technical specification contents b.1 general .....................................................................B-3 b.2 key features.............................................................B-3 b.3...

  • Page 74

    Technical specification page b-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 75: B.1 General

    Technical specification instruction manual: tt1220 professional receivers and decoders page b-3 st.Tm.Tt1220.4 b.1 general the tt1220 is a 1ru single channel mpeg-2 decoder, designed to decode dvb compliant mp@ml mpeg-2 transport streams. B.2 key features • qpsk, cofdm, or asi input • tandberg direc...

  • Page 76: B.3.2

    Technical specification page b-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 b.3.2 terrestrial cofdm input table b.2: cofdm input parameter performance safety status: selv connector type: bnc (female) impedance: 50 Ω guard interval ¼, 1 / 8 , 1 / 16 1 / 32 carrier m...

  • Page 77: B.5 Video

    Technical specification instruction manual: tt1220 professional receivers and decoders page b-5 st.Tm.Tt1220.4 b.5 video decoder table b.5: video decoder parameter performance profile: mp@ml max bit-rate: 15 mbit/s 625 lines: 525 lines: 720 x 576 720 x 480 704 x 576 704 x 480 544 x 576 544 x 480 480...

  • Page 78: B.6.2

    Technical specification page b-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 b.6.2 composite 625 lines output table b.7: 625 line analogue video parameters parameter performance frequency response: 0.0 – 5.0 mhz: ±0.5 db 5.0 – 5.5 mhz: +0.5 db / –1.5 db 5.5 – 5.8 mh...

  • Page 79: B.6.5

    Technical specification instruction manual: tt1220 professional receivers and decoders page b-7 st.Tm.Tt1220.4 b.6.5 vbi 525 lines output table b.10: 525 line vbi analogue output parameter performance vits lines output system: itu-r j.63 vits (lines): line 17, field 1 and 2 gcr: ref. Atsc doc a/49 b...

  • Page 80: B.6.9

    Technical specification page b-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 b.6.9 audio decoder (2 stereo audio version) table b.14: audio decoder capacity, extended version parameter performance decompression: mpeg-1 layer 1, mpeg-1 layer 2 (musicam) dolby ac-3 ou...

  • Page 81: B.7 Conditional

    Technical specification instruction manual: tt1220 professional receivers and decoders page b-9 st.Tm.Tt1220.4 b.7 conditional access (ca) 4 table b.17: conditional access parameter performance safety standard selv dvb version: common interface and biss mode 0/1 5 interface: 1 dvb-cif slot format: e...

  • Page 82: B.8.2

    Technical specification page b-10 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 b.8.2 remote control port table b.19: remote control port configuration parameter performance safety status: selv output connector: 9 pin d-sub (male) electrical format: rs-232 data rates:...

  • Page 83: B.10.1 Power Supply

    Technical specification instruction manual: tt1220 professional receivers and decoders page b-11 st.Tm.Tt1220.4 b.10 electrical, physical and operational b.10.1 power supply the tt1220 operates from a full range auto-sense power supply. The power supply is set to operate from 100 to 240 vac 50 to 60...

  • Page 84: B.11 Compliance

    Technical specification page b-12 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 b.10.3 environmental conditions table b.23: environmental conditions item specification operational temperature 0 °c to +50°c (14°f to 122°f) ambient with free air-flow relative humidity 0...

  • Page 85: B.11.2 Emc

    Technical specification instruction manual: tt1220 professional receivers and decoders page b-13 st.Tm.Tt1220.4 b.11.2 emc 9 the equipment has been designed and tested to meet the following: en 55022 and cispr22 european australia and new zealand emission standard limits and methods of measurement o...

  • Page 86: B.12 Other

    Technical specification page b-14 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 note... The c-tick mark was first affixed to this product in 2003. B.12 other information b.12.1 configuration notes the tt1220 is a product family, which can be configured in several diff...

  • Page 87: Contents

    Instruction manual: tt1220 professional receivers and decoders page c-1 st.Tm.Tt1220.4 annex c c. Front panel lcd menus contents c.1 lcd menus ...............................................................C-3 c.1.1 using the menus...........................................C-3 c.1.2 menu description...

  • Page 88

    Front panel lcd menus page c-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table c.11: output setup menu..................................................C-10 table c.12: audio modulation results........................................C-12 table c.13: alarm setup me...

  • Page 89: C.1 Lcd

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-3 st.Tm.Tt1220.4 c.1 lcd menus c.1.1 using the menus detailed description of the use of menus is given in chapter 3, operating the equipment locally. C.1.2 menu descriptions this annex describes the front pan...

  • Page 90: C.3 Setup

    Front panel lcd menus page c-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 c.3 setup menu c.3.1 setup menu items the setup menu contains all the submenus and items, required to set the configuration and control the daily use of the unit. Menu path: main>setup table ...

  • Page 91: C.3.2 Demod

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-5 st.Tm.Tt1220.4 c.3.2 demod menu demod menu for qpsk input model the demod menu contains all the items that need to be set, to achieve a signal lock on an incoming qpsk transport stream. Menu path: main>setu...

  • Page 92: C.3.4 Tv

    Front panel lcd menus page c-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table c.5: tv service menu display title: set: tv service description serviceid display or change the service id for the decoded service. C.3.4 tv components menu the tv components menu allow...

  • Page 93: C.3.5

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-7 st.Tm.Tt1220.4 c.3.5 audio2 service menu the audio2 service menu contains the service list for the currently tuned transport stream. The list also contains a serviceid item, which allows you to select the s...

  • Page 94: C.3.7 Advanced

    Front panel lcd menus page c-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 c.3.7 advanced menu menu options the advanced menu is a menu hub, containing submenus that allow the user to configure various system, output, alarm and remote options. Menu path: main>setup>...

  • Page 95

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-9 st.Tm.Tt1220.4 display title: adv: system opts option description ca mode allows the selection of the ca mode. Standard: utilises whatever ca system and smart card mechanism is supplied with the unit (i.E. ...

  • Page 96

    Front panel lcd menus page c-10 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 output setup menu the output setup menu, contains the parameters necessary to configure the output of the unit. These parameters affect how the video, audio, and vbi information is decoded, ...

  • Page 97

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-11 st.Tm.Tt1220.4 display title: adv: output setup option description vid. Setup 525> the video setup 525 menu contains all the parameters that affect the video, other than the basic selection of video servic...

  • Page 98

    Front panel lcd menus page c-12 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table c.12 describes, in more detail, the modulator option shown in table c.11 under tv audio setup. Table c.12: audio modulation results audio source modulator output stereo mono transparen...

  • Page 99

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-13 st.Tm.Tt1220.4 for further information on what the different alarms mean, refer to annex d, alarm categories and conditions. Rs232 setup menu the rs232 setup menu allows the user to enter the configuration...

  • Page 100

    Front panel lcd menus page c-14 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 the transmitted pid’s contents should have a lower rate than 115200 bit/s, since this is the maximum output rate. If the rate is higher, burst mode can be used, as explained in the output me...

  • Page 101: C.4 Status

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-15 st.Tm.Tt1220.4 c.4 status menu c.4.1 status menu items the status menu contains all the submenus and items, required to check the condition of the unit, and the currently decoded service. Menu path: main>s...

  • Page 102: C.4.4 Signal

    Front panel lcd menus page c-16 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 menu path: main>status>input table c.20: input status menu for qpsk input models display title: status: input description ber(postv) provides the post viterbi ber measurement, in logarithmic...

  • Page 103

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-17 st.Tm.Tt1220.4 table c.24: video signal status menu display title: sig: video description hsize display the horizontal resolution of the video vsize display the vertical resolution of the video eff. Rate s...

  • Page 104

    Front panel lcd menus page c-18 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table c.27: pts status menu display title: sig: pts description vps use % shows the usage, in percent, of the video decoding buffer. Vps err ms shows the difference (in ms) between the actua...

  • Page 105

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-19 st.Tm.Tt1220.4 ca module menu the ca module menu shows the currently active ca system, and allows access to the lower lever ca menus. Menu path: main>status>signal>ca module table c.29: ca system menu disp...

  • Page 106: C.4.5 Pid

    Front panel lcd menus page c-20 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 table c.31: data menu display title: sig: data description buff use % shows the usage, in percent, of the data decoding buffer. Type “piped”, “format #1”, “format #2”, “asynchronous” rate sh...

  • Page 107: C.4.6

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-21 st.Tm.Tt1220.4 c.4.6 download info menu the download info menu displays information about the current download status of new code or information to the unit. Menu path: main>status>pid>download info table ...

  • Page 108: C.6 Properties

    Front panel lcd menus page c-22 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 c.6 properties menu c.6.1 properties menu items shows the hardware and software properties of the tt1220. Table c.39: properties menu display title: pid info: tv comp description sw version ...

  • Page 109

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-23 st.Tm.Tt1220.4 display title: pro: hw config description section ca.Commonif dvb common interface hardware and software available ca.Biss/fixed key biss mode-1 4 software is available ca.Signal prot. Tandb...

  • Page 110: C.7

    Front panel lcd menus page c-24 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 c.7 the menu tree figure c.1: menu tree m a i n m e n u s e t u p > s t a t u s > p r o p e r t ie s > s e t u p d e m o d > * c o f d m > * t v s e r v ic e > * * t v c o m p o n e n t s > ...

  • Page 111

    Front panel lcd menus instruction manual: tt1220 professional receivers and decoders page c-25 st.Tm.Tt1220.4 *) menu entry depends on hardware configuration. **) menu entry depends on sw configuration. (see configurable menus) ***) menu entry depends on hardware configuration and software configura...

  • Page 112

    Front panel lcd menus page c-26 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 113: Contents

    Instruction manual: tt1220 professional receivers and decoders page d-1 st.Tm.Tt1220.4 annex d d. Alarm categories and conditions contents d.1 alarm conditions.......................................................D-3 d.2 input stage alarms....................................................D-3 d.2....

  • Page 114

    Alarm categories and conditions page d-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 115: D.1 Alarm

    Alarm categories and conditions instruction manual: tt1220 professional receivers and decoders page d-3 st.Tm.Tt1220.4 d.1 alarm conditions this chapter lists the alarm conditions detected by the unit. It also lists a description for the alarm, a possible remedy, and the default state of the alarm i...

  • Page 116: D.3

    Alarm categories and conditions page d-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 d.3 output stage alarms d.3.1 video output alarms the video output alarms relate to errors occurring in the video stream decoder. Table d.3: video alarm categories and conditions al...

  • Page 117: D.3.3 Vbi

    Alarm categories and conditions instruction manual: tt1220 professional receivers and decoders page d-5 st.Tm.Tt1220.4 d.3.3 vbi output alarms the vbi output alarms relate to errors occurring in the decoding and embedding of vbi information into the outgoing video. Table d.5: vbi alarm categories an...

  • Page 118: D.4

    Alarm categories and conditions page d-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 d.4 ca and psi/si related errors d.4.1 ca related alarms the ca status alarms indicate the current condition of the ca system table d.7: ca related alarm categories and conditions a...

  • Page 119: D.5 Config

    Alarm categories and conditions instruction manual: tt1220 professional receivers and decoders page d-7 st.Tm.Tt1220.4 d.5 config alarms the config alarms contains alarms regarding the mismatches between present hardware, software and license keys, and the overall health of the hardware. Table d.9: ...

  • Page 120

    Alarm categories and conditions page d-8 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 121: Contents

    Instruction manual: tt1220 professional receivers and decoders page e-1 st.Tm.Tt1220.4 annex e e. Using the tt1220 with the tandberg director system contents e.1 configuring the tt1220 for use with tandberg director.................................................E-3 e.1.1 getting started .............

  • Page 122

    Using the tt1220 with the tandberg director system page e-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 123: E.1

    Using the tt1220 with the tandberg director system instruction manual: tt1220 professional receivers and decoders page e-3 st.Tm.Tt1220.4 e.1 configuring the tt1220 for use with tandberg director e.1.1 getting started you must have the tandberg director ca option installed 1 , a director smart card ...

  • Page 124: E.2

    Using the tt1220 with the tandberg director system page e-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 e.2 response to over the air commands e.2.1 general this section describes how the decoder responds to over-the-air commands from the tandberg director system. E....

  • Page 125: E.2.7

    Using the tt1220 with the tandberg director system instruction manual: tt1220 professional receivers and decoders page e-5 st.Tm.Tt1220.4 e.2.7 store carrier data stores a particular service as a preset channel. Subsequently, the head-end can force a service selection from this preset – see section ...

  • Page 126

    Using the tt1220 with the tandberg director system page e-6 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 blank.

  • Page 127

    Instruction manual: tt1220 professional receivers and decoders index-1 st.Tm.Tt1220.4 index the following conventions are used in this manual: a page number entry in bold indicates a reference to a heading; a page number entry in italic is a reference to a table or figure; otherwise the page number ...

  • Page 128

    Index index-2 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 address, vii d data. See under rs-232 data default alarm state, d-3 demod menu, c-5 dolby ac-3 digital, 2-12 dolby pro logic analogue audio, 2-12 download info menu, c-21 dvb ci, 1-9 e earth technical, 2-7 ed...

  • Page 129

    Index instruction manual: tt1220 professional receivers and decoders index-3 st.Tm.Tt1220.4 remote, c-13 rs-232 data, c-19 rs232 setup, c-13 setup, c-4 signal status, c-16 status, c-15 system options, c-8 tree, c-24 tv audio setup, c-11 tv components, c-6 tv components submenu, c-20 tv service, c-5 ...

  • Page 130

    Index index-4 instruction manual: tt1220 professional receivers and decoders st.Tm.Tt1220.4 setup menu, c-4 signal connections, 2-9 signal status menu, c-16 software current version, 1-3 software properties, c-22 specification environmental conditions, b-12 spectum inversion, 3-5 status menu, c-15 a...