1. DL manuals
  2. TANDBERG
  3. Media Converter
  4. Voyager E5784
  5. Reference Manual

TANDBERG Voyager E5784 Reference Manual

Manual is about: HD DSNG

Summary of Voyager E5784

  • Page 1

    St.Re.E10137.3 issue 3 english (uk) reference guide voyager e5784 and e5788 hd dsng encoder software version 3.9.0 e5784/e5788 encoder.

  • Page 2

    Preliminary pages page ii reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 issue 3 first published in 2006 by: t andberg t elevision l td r egistered a ddress : u nit 2 s trategic p ark , c omines w ay , h edge e nd , s outhampton , h ampshire , so30 4da registered company num...

  • Page 3: List of Contents

    Preliminary pages reference guide: voyager e5784 and e5788 hd dsng encoder page iii st.Re.E10137.3 list of contents chapter 1: introduction to the basic encoder gives a general description of the equipment and its main features and functions. Identifies the controls, indicators and connectors on the...

  • Page 4: About This Reference Guide

    Preliminary pages page iv reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 about this reference guide this reference guide provides instructions and information for the installation and operation of the voyager e5784 and e5788 hd dsng encoder. This reference guide should be ke...

  • Page 5: Acknowledgements

    Preliminary pages reference guide: voyager e5784 and e5788 hd dsng encoder page v st.Re.E10137.3 acknowledgements general all best endeavours have been made to acknowledge registered trademarks and trademarks used throughout this reference guide. Any notified omissions will be rectified in the next ...

  • Page 6: Warnings, Cautions and Notes

    Preliminary pages page vi reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 warnings, cautions and notes heed warnings all warnings on the product and in the operating instructions should be adhered to. The manufacturer can not be held responsible for injuries or damage where w...

  • Page 7: Contact Information

    Preliminary pages reference guide: voyager e5784 and e5788 hd dsng encoder page vii st.Re.E10137.3 contact information tandberg television customer services support services our primary objective is to provide first class customer care that is tailored to your specific business and operational requi...

  • Page 8: Technical Training

    Preliminary pages page viii reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 technical training training courses tandberg television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies. Tandberg can pr...

  • Page 9: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 1-1 st.Re.E10137.3 chapter 1 1. Introduction to the basic encoder contents 1.1 scope of this reference guide................................ 1-3 1.1.1 who should use this reference guide....... 1-3 1.1.2 build version .......................

  • Page 10

    Introduction to the basic encoder page 1-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 list of figures figure 1.1: encoder front view..................................................... 1-4 figure 1.2: typical dsng encoder configuration ........................ 1-5 figur...

  • Page 11: 1.1

    Introduction to the basic encoder reference guide: voyager e5784 and e5788 hd dsng encoder page 1-3 st.Re.E10137.3 1.1 scope of this reference guide 1.1.1 who should use this reference guide this reference guide is written for operators/users of the e5784 and e5788 hd dsng encoders to assist in the ...

  • Page 12: 1.2

    Introduction to the basic encoder page 1-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 1.1: encoder front view there are four vacant slots for option modules. These slots can be occupied by any combinations of modules shown in chapter 3, options and upgrades. Table...

  • Page 13: 1.2.2 Dsng

    Introduction to the basic encoder reference guide: voyager e5784 and e5788 hd dsng encoder page 1-5 st.Re.E10137.3 the audio functionality supports multiple sampling frequencies, bit-rates and coding modes. Audio can be input in balanced analogue, digital aes/ebu input as a discrete channel or embed...

  • Page 14

    Introduction to the basic encoder page 1-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 an improvement in performance is achieved by using additional video compression hardware at the front end of the video encoder. A pre-processor analyses the incoming video signal 'ahead...

  • Page 15

    Introduction to the basic encoder reference guide: voyager e5784 and e5788 hd dsng encoder page 1-7 st.Re.E10137.3 • an internal frame synchroniser (see internal frame synchroniser on page 1-8) • support for active format descriptor (afd) • support for a variety of group of pictures (gop) structures...

  • Page 16

    Introduction to the basic encoder page 1-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 note… lower bit-rates can be achieved, in hd mode, when used in statistical multiplexing equipment. Coding resolutions to provide optimum picture quality over the full range of supporte...

  • Page 17: 1.3.2 Audio

    Introduction to the basic encoder reference guide: voyager e5784 and e5788 hd dsng encoder page 1-9 st.Re.E10137.3 1.3.2 audio encoding general audio can be encoded to: • mpeg-1 audio (layer 2) standard (sampling rate 32 khz or 48 khz). • dolby digital (ac-3) 9 (sampling rate 32 khz or 48 khz) 10 . ...

  • Page 18: 1.3.3

    Introduction to the basic encoder page 1-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 these signals may be processed using the encoding modes in the following section. Mpeg encoding modes the two stereo pairs may be configured in various encoding modes: • single mono: e...

  • Page 19

    Introduction to the basic encoder reference guide: voyager e5784 and e5788 hd dsng encoder page 1-11 st.Re.E10137.3 vbi in picture by selecting the vbi in picture extended active picture format available in the mpeg 4:2:2 specification the encoder compresses and transmits the vbi data as part of the...

  • Page 20: 1.3.4

    Introduction to the basic encoder page 1-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 line filters can be invoked to selectively disable any individual lines in this range. The filters are provided to allow the user to ensure that non-teletext lines (e.G. Its lines) are...

  • Page 21: 1.4 Guided

    Introduction to the basic encoder reference guide: voyager e5784 and e5788 hd dsng encoder page 1-13 st.Re.E10137.3 1.4 guided tour 1.4.1 enclosure the enclosure can be freestanding or mounted in a 19-inch rack. All inputs and outputs are via rear panel connectors. 1.4.2 front panel description fron...

  • Page 22: 1.4.3

    Introduction to the basic encoder page 1-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 1.4: encoder front panel indicators 1.4.3 rear panel description introduction the encoder provides connectors at the rear panel (see chapter 2, installing the equipment). All, e...

  • Page 23: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 2-1 st.Re.E10137.3 chapter 2 2. Installing the equipment contents 2.1 introduction ............................................................... 2-3 2.1.1 read this first! ............................................ 2-3 2.1.2 general.....

  • Page 24

    Installing the equipment page 2-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 2.2: air path through the enclosure .................................. 2-6 figure 2.3: if rear panel component parts and connectors....... 2-9 figure 2.4: l-band rear panel component part...

  • Page 25: 2.1 Introduction

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-3 st.Re.E10137.3 2.1 introduction 2.1.1 read this first! The encoder must be handled carefully and thoughtfully to prevent safety hazards and damage. It is usually supplied as part of a system installed by tandb...

  • Page 26: 2.2 Preliminary

    Installing the equipment page 2-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 fcc this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protect...

  • Page 27: 2.3.2 Cable

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-5 st.Re.E10137.3 figure 2.1: fitting the encoder into a rack 2.3.2 cable routing power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. ...

  • Page 28

    Installing the equipment page 2-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 the unit is designed for stationary or fixed use only. Ensure it is firmly and safely located and has an adequate through-flow of air. Allow at least 50 mm free air-space at each side of the equ...

  • Page 29: 2.4

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-7 st.Re.E10137.3 2.4 ac mains operating voltage and earthing 2.4.1 ac power supply caution... This product should be operated only from the type of power source indicated on the marking label. If you are not sur...

  • Page 30

    Installing the equipment page 2-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 2.2: non standard supply cord wire colours wire colour (uk) action green-and-yellow ...Must be connected to the terminal in the plug which is marked with the letter e or the safety earth s...

  • Page 31: 2.5

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-9 st.Re.E10137.3 2.5 signal connections for the basic unit 2.5.1 introduction all signal connectors are located at the rear panel of the encoder. For a detailed interface specification see annex b, technical spe...

  • Page 32: 2.5.2

    Installing the equipment page 2-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 2.5.2 connecting up the basic encoder once the unit has been installed in its intended operating position, it is ready to be connected up to the rest of the system equipment (see figure 2.5), p...

  • Page 33: 2.5.3 Power

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-11 st.Re.E10137.3 2.5.3 power supply section 2.4, ac mains operating voltage and earthing provides details of power supply connection, protective earthing and safety. Read all the instructions carefully and take...

  • Page 34: 2.5.6 Audio

    Installing the equipment page 2-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 h sync studio black and burst should be fed to the 75 Ω bnc connector (h sync). This will then genlock the encoder to the studio system. This method may be required with some audio formats, or ...

  • Page 35: 2.5.7

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-13 st.Re.E10137.3 table 2.7: audio in connector pin signal pin signal analogue digital analogue digital 1 left channel a (+) aes/ebu (a) (+) 9 left channel a (-) aes/ebu (a) (-) 2 not connected 10 right channel ...

  • Page 36

    Installing the equipment page 2-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 ethernet #1 and #2 an 8-way, rj-45 connector provides a 10baset ethernet interface for communications with the mem for control and monitoring. The encoder has a single switched ethernet channel...

  • Page 37: 2.5.9 Data

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-15 st.Re.E10137.3 remote control a 9-way, d-type male connector provides an rs-232/rs-485 port for remote control of the encoder (see serial protocol option). This connector is wired as a dte. Table 2.11: remote...

  • Page 38

    Installing the equipment page 2-16 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 notes… 1. Signal names are with respect to a dte in accordance with the rs-232 specification. 2. Remote pin numbers only apply to a 9-way d-type connector. 3. 25-way connectors have received da...

  • Page 39

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-17 st.Re.E10137.3 2.5.10 satellite modulator if output if out (main) 75 Ω bnc socket provides an if output. Table 2.14: if out connector (main) item specification connector type bnc 75 Ω female type analogue con...

  • Page 40: 2.6 Powering

    Installing the equipment page 2-18 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 l-band out (main) 50 Ω sma female connector provides the main l-band output. This can also provide +24 vdc at up to 500 ma to power an up-converter. Table 2.17: l-band out (main) connector item...

  • Page 41: 2.6.2 Powering

    Installing the equipment reference guide: voyager e5784 and e5788 hd dsng encoder page 2-19 st.Re.E10137.3 2.6.2 powering up to power up the encoder: 1. Turn on the local power supply. The encoder executes a series of power-up initialisation and self-test routines. 2. Confirm that the green power le...

  • Page 42

    Installing the equipment page 2-20 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 43: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 3-1 st.Re.E10137.3 chapter 3 3. Options and upgrades contents 3.1 what’s available........................................................ 3-3 3.1.1 option functions .......................................... 3-3 3.1.2 limitations on numb...

  • Page 44

    Options and upgrades page 3-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.11.1 assembly.....................................................3-23 3.11.2 connectors..................................................3-24 3.12 m2/eom2/atms155e stm-1 electrical module.....3-2...

  • Page 45: 3.1 What’S

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-3 st.Re.E10137.3 3.1 what’s available 3.1.1 option functions the basic encoder functionality can be enhanced with the inclusion of options, hardware and software. Each hardware option module consists of a horizontal...

  • Page 46: 3.1.2

    Options and upgrades page 3-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 3.2: software options marketing code name sd options m2/eso2/nr noise reduction - three levels of professional-grade adaptive noise reduction. M2/eso2/vbr reflex and vbr - automatic variable b...

  • Page 47: 3.2

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-5 st.Re.E10137.3 3.2 basic interoperable scrambling system - biss (m2/edcom2/biss) with the appropriate configuration, the encoder can use the basic interoperable scrambling system (biss 2 ) to scramble the outgoing...

  • Page 48: 3.3

    Options and upgrades page 3-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.3 additional audio and linear pcm option (m2/eom2/audlin2) 3.3.1 overview the additional audio option module supplements the audio encoding functionality of the encoder. This module supports audio...

  • Page 49

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-7 st.Re.E10137.3 see table 3.1 for the slots that it can be installed in. Audio in connector connect the audio cable to the audio in connector. The 15-way, d-type male connector is used in different ways according t...

  • Page 50: 3.4

    Options and upgrades page 3-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.4 advanced audio coding option (m2/eom2/advaud) 3.4.1 overview the advanced audio coding option module supplements the audio encoding functionality of the encoder to enable it to be used as a drop...

  • Page 51

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-9 st.Re.E10137.3 aes x connector connect the audio input cables to the appropriate aes input connectors. Each connector accepts a single stereo pair. They may be independently configured or form part of an multi-cha...

  • Page 52: 3.5

    Options and upgrades page 3-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.5 remux option (m2/eom2/remux) 3.5.1 overview the remux option module is capable of accepting up to three separate transport streams via asi connectors, and one transport stream from the host enc...

  • Page 53: 3.5.3

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-11 st.Re.E10137.3 dvb asi in 1, 2 and 3 connectors a 75 Ω bnc connector provides an input to the unit. Table 3.5: dvb asi in connector pin signal centre signal screen ground note… when connecting the inputs, always ...

  • Page 54

    Options and upgrades page 3-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 3.4: block diagram – one stage of remultiplexing similarly, if two stages of remultiplexing are introduced, thirteen encoders can be combined, providing up to thirteen services in the remult...

  • Page 55: 3.5.4

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-13 st.Re.E10137.3 3.5.4 function of remultiplexer it is the function of the remultiplexer to combine the locally generated host services with the externally supplied input services, connected via asi inputs to the r...

  • Page 56: 3.5.5 Using

    Options and upgrades page 3-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.5.5 using the remultiplexer set the output bit-rate to the required value in the setup/mux menu. Connect transport streams that are to be combined (remultiplexed) with the host encoder’s services...

  • Page 57: 3.5.8

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-15 st.Re.E10137.3 the easiest way to configure the bit-rates to avoid overflow, is as follows: 1. Divide the 188 byte output bit-rate of the primary (master) remultiplexing unit, (this can be found in the setup/mux/...

  • Page 58: 3.6

    Options and upgrades page 3-16 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.6 smpte 310 (ssi) and asi optical outputs option modules (m2/eom2/asi-opt) and (m2/eom2/ssi-us) 3.6.1 overview the modules allow the encoder to output mpeg-2 transport streams in the following fo...

  • Page 59

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-17 st.Re.E10137.3 smpte 310 1, 2 and 3 connectors a 75 Ω female bnc connector provides an smpte 310 compliant synchronous serial (ssi) output for the unit. Table 3.7: smpte 310 connector pin signal centre signal scr...

  • Page 60: 3.7

    Options and upgrades page 3-18 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.7 atm network interface option module (m2/eom2/atms155_…) 3.7.1 overview the atm 3 network interface module allows the encoder to transmit and receive mpeg-2 transport streams over broadband tele...

  • Page 61: 3.8

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-19 st.Re.E10137.3 table 3.10: dvb-asi copper output connector item specification safety status selv type analogue connector designation dvb asi-c out connector type bnc 75 Ω socket pin-outs: centre shield signal gro...

  • Page 62: 3.8.2

    Options and upgrades page 3-20 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 3.8: atm network interface module, multimode optical (m2/eom2/atms155mm) 3.8.2 multimode fibre optic connector warning… led: class i laser product do not look into the aperture. Looking into...

  • Page 63: 3.9

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-21 st.Re.E10137.3 3.9 stm-1 oc3 monomode physical interface module (m2/eom2/atms155sm) 3.9.1 assembly see table 3.1 for the slots that it can be installed in. For details of the dvb-asi copper input, dvb-asi copper ...

  • Page 64: 3.10.1 Assembly

    Options and upgrades page 3-22 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 this port is available on the s8067 physical layer option module. It provides a bi-directional interface to an sdh or sonet b-isdn network, at a fixed line transmission rate of 155.520 mbit/s. This...

  • Page 65: 3.10.2 Connectors

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-23 st.Re.E10137.3 3.10.2 connectors this port is available on the s11366 physical layer option module. It provides a bi-directional interface to a pdh/e3 network at a transmission rate of 34.368 mbit/s. This is a fu...

  • Page 66: 3.11.2 Connectors

    Options and upgrades page 3-24 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 3.11: rear panel connectors (m2/eom2/atms45 atm pdh/ds3 module) 3.11.2 connectors this port is available on the s11365 physical layer option module. It provides a bi-directional interface to...

  • Page 67: 3.12.2 Connectors

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-25 st.Re.E10137.3 figure 3.12: rear panel connectors (m2/eom2/atms155e atm stm-1 electrical module) 3.12.2 connectors this port is available on the s11367 physical layer option module. It provides a bi-directional i...

  • Page 68: Ip Card Pro-Mpeg Fec

    Options and upgrades page 3-26 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.13 ip output card (m2/eom2/ip) ip card pro-mpeg fec (m2/eom2/ip/profec) 3.13.1 overview the ip output card provides a 10/100baset ethernet port, out of which the transport stream generated by the...

  • Page 69: 3.13.4 Assembly

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-27 st.Re.E10137.3 note… the maximum multiplexer output rate, which can be reliably streamed to each ip address, is reduced for each extra destination address that is added. I.E. If two destinations are specified, th...

  • Page 70

    Options and upgrades page 3-28 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 3.18: asi out connector item specification connector type 75 Ω bnc female connector designation asi out pin-outs centre signal screen ground ethernet output an rj-45 connector provides a 10/1...

  • Page 71: (M2/eom2/g703)

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-29 st.Re.E10137.3 3.14 g.703 interface card option (m2/eom2/g703) 3.14.1 overview see table 3.1 for the slots that it can be installed in. The g.703 interface card provides a g.703 adapted encoder transport stream o...

  • Page 72: 3.15.1 Overview

    Options and upgrades page 3-30 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 in connector note… this is not normally connected. A 75 Ω female bnc connector provides a g.703 transport stream input. Table 3.21: in connector pin signal centre signal screen ground rs-232 connec...

  • Page 73: 3.15.2 Assembly

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-31 st.Re.E10137.3 3.15.2 assembly figure 3.15: general purpose interface m2/eom2/gpi 3.15.3 connector table 3.22: gpi connector item specification item specification connector type 15-way d-type male connector desig...

  • Page 74: 3.16 Software

    Options and upgrades page 3-32 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.16 software options 3.16.1 standard definition m2/eso2/nr this purchasable option upgrades the encoder to include noise reduction mode. Contact customer services for details. M2/eso2/vbr this pur...

  • Page 75: 3.16.2 High

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-33 st.Re.E10137.3 m2/eso2/525vbidata this purchasable option allows the encoder to provide nabts and gemstar 2.0 vbi extraction. Contact customer services for details m2/eso2/dpi this purchasable licence key allows ...

  • Page 76

    Options and upgrades page 3-34 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 77: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 3-1 st.Re.E10137.3 chapter 3 3. Options and upgrades contents 3.1 what’s available........................................................ 3-3 3.1.1 option functions .......................................... 3-3 3.1.2 limitations on numb...

  • Page 78

    Options and upgrades page 3-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.11.1 assembly.....................................................3-23 3.11.2 connectors..................................................3-24 3.12 m2/eom2/atms155e stm-1 electrical module.....3-2...

  • Page 79: 3.1 What’S

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-3 st.Re.E10137.3 3.1 what’s available 3.1.1 option functions the basic encoder functionality can be enhanced with the inclusion of options, hardware and software. Each hardware option module consists of a horizontal...

  • Page 80: 3.1.2

    Options and upgrades page 3-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 3.2: software options marketing code name sd options m2/eso2/nr noise reduction - three levels of professional-grade adaptive noise reduction. M2/eso2/vbr reflex and vbr - automatic variable b...

  • Page 81: 3.2

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-5 st.Re.E10137.3 3.2 basic interoperable scrambling system - biss (m2/edcom2/biss) with the appropriate configuration, the encoder can use the basic interoperable scrambling system (biss 2 ) to scramble the outgoing...

  • Page 82: 3.3

    Options and upgrades page 3-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.3 additional audio and linear pcm option (m2/eom2/audlin2) 3.3.1 overview the additional audio option module supplements the audio encoding functionality of the encoder. This module supports audio...

  • Page 83

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-7 st.Re.E10137.3 see table 3.1 for the slots that it can be installed in. Audio in connector connect the audio cable to the audio in connector. The 15-way, d-type male connector is used in different ways according t...

  • Page 84: 3.4

    Options and upgrades page 3-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.4 advanced audio coding option (m2/eom2/advaud) 3.4.1 overview the advanced audio coding option module supplements the audio encoding functionality of the encoder to enable it to be used as a drop...

  • Page 85

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-9 st.Re.E10137.3 aes x connector connect the audio input cables to the appropriate aes input connectors. Each connector accepts a single stereo pair. They may be independently configured or form part of an multi-cha...

  • Page 86: 3.5

    Options and upgrades page 3-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.5 remux option (m2/eom2/remux) 3.5.1 overview the remux option module is capable of accepting up to three separate transport streams via asi connectors, and one transport stream from the host enc...

  • Page 87: 3.5.3

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-11 st.Re.E10137.3 dvb asi in 1, 2 and 3 connectors a 75 Ω bnc connector provides an input to the unit. Table 3.5: dvb asi in connector pin signal centre signal screen ground note… when connecting the inputs, always ...

  • Page 88

    Options and upgrades page 3-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 3.4: block diagram – one stage of remultiplexing similarly, if two stages of remultiplexing are introduced, thirteen encoders can be combined, providing up to thirteen services in the remult...

  • Page 89: 3.5.4

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-13 st.Re.E10137.3 3.5.4 function of remultiplexer it is the function of the remultiplexer to combine the locally generated host services with the externally supplied input services, connected via asi inputs to the r...

  • Page 90: 3.5.5 Using

    Options and upgrades page 3-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.5.5 using the remultiplexer set the output bit-rate to the required value in the setup/mux menu. Connect transport streams that are to be combined (remultiplexed) with the host encoder’s services...

  • Page 91: 3.5.8

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-15 st.Re.E10137.3 the easiest way to configure the bit-rates to avoid overflow, is as follows: 1. Divide the 188 byte output bit-rate of the primary (master) remultiplexing unit, (this can be found in the setup/mux/...

  • Page 92: 3.6

    Options and upgrades page 3-16 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.6 smpte 310 (ssi) and asi optical outputs option modules (m2/eom2/asi-opt) and (m2/eom2/ssi-us) 3.6.1 overview the modules allow the encoder to output mpeg-2 transport streams in the following fo...

  • Page 93

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-17 st.Re.E10137.3 smpte 310 1, 2 and 3 connectors a 75 Ω female bnc connector provides an smpte 310 compliant synchronous serial (ssi) output for the unit. Table 3.7: smpte 310 connector pin signal centre signal scr...

  • Page 94: 3.7

    Options and upgrades page 3-18 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.7 atm network interface option module (m2/eom2/atms155_…) 3.7.1 overview the atm 3 network interface module allows the encoder to transmit and receive mpeg-2 transport streams over broadband tele...

  • Page 95: 3.8

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-19 st.Re.E10137.3 table 3.10: dvb-asi copper output connector item specification safety status selv type analogue connector designation dvb asi-c out connector type bnc 75 Ω socket pin-outs: centre shield signal gro...

  • Page 96: 3.8.2

    Options and upgrades page 3-20 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 3.8: atm network interface module, multimode optical (m2/eom2/atms155mm) 3.8.2 multimode fibre optic connector warning… led: class i laser product do not look into the aperture. Looking into...

  • Page 97: 3.9

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-21 st.Re.E10137.3 3.9 stm-1 oc3 monomode physical interface module (m2/eom2/atms155sm) 3.9.1 assembly see table 3.1 for the slots that it can be installed in. For details of the dvb-asi copper input, dvb-asi copper ...

  • Page 98: 3.10.1 Assembly

    Options and upgrades page 3-22 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 this port is available on the s8067 physical layer option module. It provides a bi-directional interface to an sdh or sonet b-isdn network, at a fixed line transmission rate of 155.520 mbit/s. This...

  • Page 99: 3.10.2 Connectors

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-23 st.Re.E10137.3 3.10.2 connectors this port is available on the s11366 physical layer option module. It provides a bi-directional interface to a pdh/e3 network at a transmission rate of 34.368 mbit/s. This is a fu...

  • Page 100: 3.11.2 Connectors

    Options and upgrades page 3-24 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 3.11: rear panel connectors (m2/eom2/atms45 atm pdh/ds3 module) 3.11.2 connectors this port is available on the s11365 physical layer option module. It provides a bi-directional interface to...

  • Page 101: 3.12.2 Connectors

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-25 st.Re.E10137.3 figure 3.12: rear panel connectors (m2/eom2/atms155e atm stm-1 electrical module) 3.12.2 connectors this port is available on the s11367 physical layer option module. It provides a bi-directional i...

  • Page 102: Ip Card Pro-Mpeg Fec

    Options and upgrades page 3-26 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.13 ip output card (m2/eom2/ip) ip card pro-mpeg fec (m2/eom2/ip/profec) 3.13.1 overview the ip output card provides a 10/100baset ethernet port, out of which the transport stream generated by the...

  • Page 103: 3.13.4 Assembly

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-27 st.Re.E10137.3 note… the maximum multiplexer output rate, which can be reliably streamed to each ip address, is reduced for each extra destination address that is added. I.E. If two destinations are specified, th...

  • Page 104

    Options and upgrades page 3-28 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 3.18: asi out connector item specification connector type 75 Ω bnc female connector designation asi out pin-outs centre signal screen ground ethernet output an rj-45 connector provides a 10/1...

  • Page 105: (M2/eom2/g703)

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-29 st.Re.E10137.3 3.14 g.703 interface card option (m2/eom2/g703) 3.14.1 overview see table 3.1 for the slots that it can be installed in. The g.703 interface card provides a g.703 adapted encoder transport stream o...

  • Page 106: 3.15.1 Overview

    Options and upgrades page 3-30 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 in connector note… this is not normally connected. A 75 Ω female bnc connector provides a g.703 transport stream input. Table 3.21: in connector pin signal centre signal screen ground rs-232 connec...

  • Page 107: 3.15.2 Assembly

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-31 st.Re.E10137.3 3.15.2 assembly figure 3.15: general purpose interface m2/eom2/gpi 3.15.3 connector table 3.22: gpi connector item specification item specification connector type 15-way d-type male connector desig...

  • Page 108: 3.16 Software

    Options and upgrades page 3-32 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 3.16 software options 3.16.1 standard definition m2/eso2/nr this purchasable option upgrades the encoder to include noise reduction mode. Contact customer services for details. M2/eso2/vbr this pur...

  • Page 109: 3.16.2 High

    Options and upgrades reference guide: voyager e5784 and e5788 hd dsng encoder page 3-33 st.Re.E10137.3 m2/eso2/525vbidata this purchasable option allows the encoder to provide nabts and gemstar 2.0 vbi extraction. Contact customer services for details m2/eso2/dpi this purchasable licence key allows ...

  • Page 110

    Options and upgrades page 3-34 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 111: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 4-1 st.Re.E10137.3 chapter 4 4. Operating the equipment locally contents 4.1 introduction ............................................................. 4-11 4.2 establishing local control....................................... 4-11 4.2.1 ...

  • Page 112

    Operating the equipment locally page 4-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 network mask option..................................4-26 gateway address option ............................4-26 set community name option .....................4-26 snmp master option .....

  • Page 113

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-3 st.Re.E10137.3 insert vbv delay option (sd only)............ 4-52 pes header option .................................... 4-52 afd location option (sd only) ................. 4-52 intra dc precision .......

  • Page 114

    Operating the equipment locally page 4-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 embedded 1-2 did option..........................4-81 embedded 3-4 did option..........................4-81 audio pid option ........................................4-81 component tag opt...

  • Page 115

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-5 st.Re.E10137.3 frequency option ..................................... 4-103 modulation type option ........................... 4-103 fec (outer) option .................................. 4-103 fec (inne...

  • Page 116

    Operating the equipment locally page 4-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.10.10 ras firmware...........................................4-121 4.10.11 biss hardware .........................................4-121 4.10.12 biss firmware...............................

  • Page 117

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-7 st.Re.E10137.3 4.14.1 overview................................................... 4-145 4.14.2 active errors option ................................. 4-145 status of error masks ...........................

  • Page 118

    Operating the equipment locally page 4-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.62: coding standard options ......................................... 4-70 table 4.63: lip sync adjustment options ................................... 4-71 table 4.64: audio bit-r...

  • Page 119

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-9 st.Re.E10137.3 table 4.177: output options ..................................................... 4-138 table 4.178: source (bnc) options.......................................... 4-138 table 4.179: serv...

  • Page 120

    Operating the equipment locally page 4-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 121: 4.1 Introduction

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-11 st.Re.E10137.3 4.1 introduction the front panel display and keypad are used to configure, control and monitor the encoder. The control interface is a structured menu which gives access to the various o...

  • Page 122: 4.2.2 Summary

    Operating the equipment locally page 4-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.2.2 summary screen note… the screen may vary slightly in detail between encoders. Figure 4.2: summary screen note… the configurations menu can also be accessed through the advanced men...

  • Page 123: 4.3

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-13 st.Re.E10137.3 press the softkey adjacent to the key icon. This shows the keyboard lock screen. Press the yes softkey to disable the softkeys. They are all disabled with the exception of unlock. To ena...

  • Page 124: 4.3.3

    Operating the equipment locally page 4-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.1: keypad key assignments keypad button 1 press 2 presses 3 presses 4 presses 1 1 ( : ) 2 2 a b c 3 3 d e f 4 4 g h i 5 5 j k l 6 6 m n 6 7 7 p r s 8 8 t u v 9 9 w x y 0 0 space ...

  • Page 125: 4.3.4 Display

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-15 st.Re.E10137.3 4.3.4 display screens the display screens shown in section 4.3.3, how to use the functions associated with softkeys are identical to those seen on the encoder front panel display screen....

  • Page 126

    Operating the equipment locally page 4-16 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 4.6: menu hierarchy – summary screen and advanced menus config menu front panel diagnostics menu — lcd display — keyboard — fail relay — alarm relay — alarm led — buzzer — quit se...

  • Page 127: 4.3.6

    Operating the equipment locally reference guide: voyager e5784 and e5788 hd dsng encoder page 4-17 st.Re.E10137.3 4.3.6 summary screen and advanced menus see figure 4.6, for the top-level menu hierarchy. Access the advanced menu from the summary screen. The advanced menu provides options for configu...

  • Page 128

    Operating the equipment locally page 4-18 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 4.7: menu hierarchy – setup/system menu — ip address — mac address — network mask — gateway address — sntp server — set community name — snmp master — last snmp master — last snmp...

  • Page 129: 4.5.2

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-19 st.Re.E10137.3 4.5.2 service info menu (syntax = atsc 1 ) overview this menu provides options for configuring the service information (si) parameters transmitted in the output ...

  • Page 130

    Operating the equipment locally — setup menu: video menu page 4-20 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 si level option this enables the service information level to be specified. Table 4.4: si level options selected option description pat/pmt/cat only program asso...

  • Page 131

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-21 st.Re.E10137.3 minor channel option this is associated with the field minor_channel_number and is used to identify a particular channel within the major_channel_number group of...

  • Page 132: 4.5.3

    Operating the equipment locally — setup menu: video menu page 4-22 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 dvb subtitle mode is provided for subtitles to be added to the locally encoded service only. It is not possible to add subtitles to services arriving on a remux ...

  • Page 133

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-23 st.Re.E10137.3 table 4.6: syntax options selected option description atsc advanced television standards committee. Dvb digital video broadcasting. Remux input n in mode where n...

  • Page 134

    Operating the equipment locally — setup menu: video menu page 4-24 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 network id option this enables the network identity to be specified. The information is included in the nit. Note… this option is not displayed if the unit is se...

  • Page 135: 4.5.4 Remote

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-25 st.Re.E10137.3 table 4.9: audio ac-3 descriptor options selected option description dvb & atsc both the atsc and dvb descriptors are used with the audio streams. Dvb only only ...

  • Page 136

    Operating the equipment locally — setup menu: video menu page 4-26 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 ip address option this option allows the ip address to be changed. Mac address option the mac address cannot be changed. Network mask option this option allows t...

  • Page 137

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-27 st.Re.E10137.3 sntp server option this option sets the ip address of a simple network time protocol (sntp) server, which the encoder will then synchronise it’s clock to. If the...

  • Page 138: 4.5.5 General

    Operating the equipment locally — setup menu: video menu page 4-28 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.5.5 general menu overview the general menu provides options for configuring the general parameters of the encoder such as the time and date, screen savers, and...

  • Page 139

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-29 st.Re.E10137.3 screen saver option this option enables the screen saver to be set. Table 4.12: screen saver options selected option description top level menu van service name ...

  • Page 140: 4.5.6

    Operating the equipment locally — setup menu: video menu page 4-30 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.15: fan control options selected option description auto (temp. Control) the fans are activated automatically when a defined temperature is reached. On t...

  • Page 141

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-31 st.Re.E10137.3 action on pid error option this option enables the action on pid error to be set. Table 4.17: action on pid error options selected option description raise alarm...

  • Page 142: 4.5.8

    Operating the equipment locally — setup menu: video menu page 4-32 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 reset encoder option a confirmation message appears ‘reset encoder – are you sure?’. If yes is selected the encoder immediately reboots, keeping the current conf...

  • Page 143

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-33 st.Re.E10137.3 logical channel option this option defines the logical channel number to be given to the service. This information is included in the nit. The valid range is 1 t...

  • Page 144: 4.6 Video

    Operating the equipment locally — setup menu: video menu page 4-34 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.6 video menu 4.6.1 introduction the video menu is selected from the setup menu. This menu permits the selection of video parameters (see figure 4.8 for menu st...

  • Page 145

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-35 st.Re.E10137.3 figure 4.8: menu hierarchy – setup/video menu (sd mode) video menu — video source.... — video filter/process 8 … — video encoder.... — vbi.... — reflex video sou...

  • Page 146

    Operating the equipment locally — setup menu: video menu page 4-36 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 4.9: menu hierarchy – setup/video menu (hd mode) shaded options are showing status and cannot be changed. 1 only shown if m2/eso2/hdvbr option enabled. 2 ...

  • Page 147

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-37 st.Re.E10137.3 input source select (sd only) this allows the enabling or disabling of automatic frame rate detection. Table 4.20: inputsource select options selected option des...

  • Page 148

    Operating the equipment locally — setup menu: video menu page 4-38 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 input horiz res (hd only) a table of live options for 1080 input only and can be 1920 or 1440. This is used to set how much picture is fed to the encoding engine...

  • Page 149

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-39 st.Re.E10137.3 table 4.25: op video loss options selected option description sd hd freeze frame the last video frame received is encoded if the video input is lost. 3 2 black a...

  • Page 150

    Operating the equipment locally — setup menu: video menu page 4-40 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.27: noise reduction options (hd only) selected option description off level 1 use noise reduction, if necessary, but don't 'damage' the picture in any wa...

  • Page 151

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-41 st.Re.E10137.3 table 4.30: default 525 options selected option description ntsc with pedestal pal-m ntsc no pedestal i/p monitor refresh option this sets the update rate of the...

  • Page 152: 4.6.3

    Operating the equipment locally — setup menu: video menu page 4-42 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.6.3 video filter/process (sd only) each of the border process menu items (top/bottom/left/right) has a number of defined levels. The level indicates the percen...

  • Page 153

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-43 st.Re.E10137.3 table 4.34: compression mode options selected option description seamless 1 seamless 2 seamless 3 seamless 4 this gives a fixed delay which allows the bit-rate t...

  • Page 154

    Operating the equipment locally — setup menu: video menu page 4-44 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 note… in seamless modes 4, 5 and 6 coding performance is compromised a little to achieve lower b min s. Bit-rate option this option enables the bit-rate to be se...

  • Page 155

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-45 st.Re.E10137.3 table 4.36: vbr mode options selected option description off vbr mode not selected. Any unused bits are stuffed. On this uses normal quantisation levels and any ...

  • Page 156

    Operating the equipment locally — setup menu: video menu page 4-46 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 a new menu item appears max (vbr) bit-rate. This is the maximum bit-rate the encoder will generate. The read-only menu item bit-rate remains, but now indicates t...

  • Page 157

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-47 st.Re.E10137.3 table 4.37: resolution options selected option sd mode description 625 line modes 525 line modes auto (720x576) 720 x576 704 x576 640 x576 544 x576 528 x576 480 ...

  • Page 158

    Operating the equipment locally — setup menu: video menu page 4-48 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.39: afd options selected option description off no afd data output. On output afd value zero if input is lost. On (no action on error) if the input is lo...

  • Page 159

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-49 st.Re.E10137.3 table 4.41: group of pictures structure options selected option description ibbbp (ibbbpbbbpbbbi) (sd only). Ibbp for successive b frames (ibbpbbpbbpbbpi) – defa...

  • Page 160

    Operating the equipment locally — setup menu: video menu page 4-50 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 note… long gops are not dvb compliant, and should be used with caution. Adaptive gop this option is not valid in hd progressive modes. The gop structure is adapt...

  • Page 161

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-51 st.Re.E10137.3 concatenation option 7 (sd only) use this option if the signal has been coded, then decoded and is about to be coded again. It reduces picture degradation associ...

  • Page 162

    Operating the equipment locally — setup menu: video menu page 4-52 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 in hd mode, the encoder also detects that a scene cut has occurred but, in this mode, inserts a complete new i frame to change the gop structure to start on the ...

  • Page 163: 4.6.5

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-53 st.Re.E10137.3 menu items shown in table 4.44 are only available if the m2/eom2/gpi gpi option card is purchased. Table 4.44: afd hd (hd only) selected option item description ...

  • Page 164

    Operating the equipment locally — setup menu: video menu page 4-54 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 vbi on pid option this option allows the transmission of vbi data on its own pid to be turned on or off. Vbi pid option this option defines the pid to be used fo...

  • Page 165

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-55 st.Re.E10137.3 wss (line 23) option (sd only) notes… 1. Aspect ratio changes when wss is enabled. 2. If the pes header option in the video encoder menu is set to pes per pictur...

  • Page 166

    Operating the equipment locally — setup menu: video menu page 4-56 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.46: vbi - line ‘n’ options option description frame rate = 29.97 hz off vbi data is not extracted from the line. Vertical interval time code vitc data ex...

  • Page 167

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-57 st.Re.E10137.3 field 1 field 2 272 9 same options as line 10 10 vitc (smpte), video index, off, closed caption, nielsen/amol 1, nielsen/amol 11 273 10 same options as line 10 1...

  • Page 168

    Operating the equipment locally — setup menu: video menu page 4-58 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 field 1 field 2 6 teletext system b or inverted teletext, vitc, video index, closed caption, wide screen signalling (wss), off, video programming system (vps) 31...

  • Page 169

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-59 st.Re.E10137.3 vbi menu (29.97/30/59.94/60 hz frame rate) vitc on pes option (sd only) extraction of vitc data from vbi lines as shown in table 4.46: vbi - line ‘n’ options on ...

  • Page 170

    Operating the equipment locally — setup menu: video menu page 4-60 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 closed caption option this option controls the extraction and processing of closed caption data by the encoder. Closed caption data can be obtained from: video l...

  • Page 171

    Operating the equipment locally — setup menu: video menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-61 st.Re.E10137.3 field 2 captions this option sets the appropriate descriptors in the psip information. It allows the number of cc services, from the source, contained in field 2...

  • Page 172: 4.7 Audio

    Operating the equipment locally page 4-62 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.7 audio menu 4.7.1 overview the encoder can process two stereo pairs as standard, but with the addition of audio option cards it can process more. The control menu for each stereo pair...

  • Page 173

    Operating the equipment locally audio menu – mpeg layer 2 reference guide: voyager e5784 and e5788 hd dsng encoder page 4-63 st.Re.E10137.3 figure 4.12: menu hierarchy – setup/audio menu — source — coding standard — audio alignment 10 — lip sync adjustment 10 — auto lip sync 9 — use minimum delay 4 ...

  • Page 174

    Operating the equipment locally: audio menu – mpeg layer 2 page 4-64 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 input level l option this indicates the input level of the left audio channel. It is for status only and cannot be changed. Input level r option this indicates...

  • Page 175

    Operating the equipment locally audio menu – mpeg layer 2 reference guide: voyager e5784 and e5788 hd dsng encoder page 4-65 st.Re.E10137.3 table 4.51: coding mode options (mpeg-2) selected option description mono left single channel mono audio, encoding the left channel. Mono right single channel m...

  • Page 176

    Operating the equipment locally: audio menu – mpeg layer 2 page 4-66 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.53: vps bits incoming signalling via line 16 encoding and signalling modes to be performed by the audio encoder video programming system word 5 iso/iec...

  • Page 177

    Operating the equipment locally audio menu – mpeg layer 2 reference guide: voyager e5784 and e5788 hd dsng encoder page 4-67 st.Re.E10137.3 auto lip sync option 10 this option controls whether the encoder automatically adjusts the audio delay to maintain lip sync with the video. If the encoder is be...

  • Page 178

    Operating the equipment locally: audio menu – mpeg layer 2 page 4-68 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.58: clip level options selected option description 12 db 12 db audio clipping level. 15 db 15 db is only available with pcb issue 4 and later. 18 db 18...

  • Page 179

    Operating the equipment locally audio menu – mpeg layer 2 reference guide: voyager e5784 and e5788 hd dsng encoder page 4-69 st.Re.E10137.3 embedded 1-2 did option this option defines the did to be de-embedded to obtain the audio source for sdi embedded 1 and sdi embedded 2. If this is set to 1024, ...

  • Page 180: 4.7.3

    Operating the equipment locally: audio menu – dolby digital (ac-3) page 4-70 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 software release option this option indicates the software version of this audio encoder channel. It is for status only and cannot be changed. 4.7.3 au...

  • Page 181

    Operating the equipment locally: audio menu – dolby digital (ac-3) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-71 st.Re.E10137.3 lip sync adjustment note… this option is only available when the audio alignment option is enabled. Using the lip sync adjustment option, audio can be ...

  • Page 182

    Operating the equipment locally: audio menu – dolby digital (ac-3) page 4-72 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 available settings dolby digital 1/0(c) 2/0(l,r) 384 kbit/s 9 9 448 kbit/s 9 9 512 kbit/s 9 9 576 kbit/s 9 9 640 kbit/s 9 9 coding mode option this opt...

  • Page 183

    Operating the equipment locally: audio menu – dolby digital (ac-3) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-73 st.Re.E10137.3 audio delay option this option is only available if the auto lip sync option is set to off. It sets the delay that should be applied to the audio. Tabl...

  • Page 184

    Operating the equipment locally: audio menu – dolby digital (ac-3) page 4-74 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 bit stream mode option this option sets the bit-stream mode that is signalled in the bit-stream. It is used to indicate the type of service the bit-str...

  • Page 185

    Operating the equipment locally: audio menu – dolby digital (ac-3) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-75 st.Re.E10137.3 mixing level option this option is only available if the production info option is set to on. This parameter indicates the acoustic sound pressure leve...

  • Page 186

    Operating the equipment locally: audio menu – dolby digital (ac-3) page 4-76 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.74: dynamic range options selected option description none program reproduction with the original dynamic range. Film standard film light music...

  • Page 187

    Operating the equipment locally: audio menu – dolby digital (ac-3) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-77 st.Re.E10137.3 embedded 1-2 did option this option defines the did to be de-embedded to obtain the audio source for sdi embedded 1 and sdi embedded 2. If this is set ...

  • Page 188: 4.7.4

    Operating the equipment locally: audio menu – dolby digital (ac-3) page 4-78 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 hardware release option this option indicates the hardware version of this audio encoder channel. It is for status only and cannot be changed. Software...

  • Page 189

    Operating the equipment locally: audio menu – dolby (ac-3) pass-thru, dolby e pass-thru and dts pass-thru reference guide: voyager e5784 and e5788 hd dsng encoder page 4-79 st.Re.E10137.3 when set, each pes contains an integral number of audio access units (au’s) and the pts shall be the same as the...

  • Page 190

    Operating the equipment locally: audio menu – dolby (ac-3) pass-thru, dolby e pass-thru and dts pass-thru page 4-80 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 lip sync offset option this option is only available if the auto lip sync option is set to on. It allows a fixed...

  • Page 191

    Operating the equipment locally: audio menu – dolby (ac-3) pass-thru, dolby e pass-thru and dts pass-thru reference guide: voyager e5784 and e5788 hd dsng encoder page 4-81 st.Re.E10137.3 table 4.83: channel options valid input range description min: 0 max: 15 this value is written to the channel id...

  • Page 192: 4.7.5

    Operating the equipment locally: audio menu – dolby (ac-3) pass-thru, dolby e pass-thru and dts pass-thru page 4-82 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.85: op digital loss options selected option description silence valid pes stream containing silence no p...

  • Page 193

    Operating the equipment locally — setup menu: audio menu - linear pcm [direct]/via src] menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-83 st.Re.E10137.3 mode. Linear pcm (via src) when selected, the audio passes through the sample rate converter before encoding. As a consequenc...

  • Page 194

    Operating the equipment locally — setup menu: audio menu - linear pcm [direct]/via src] menu page 4-84 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 coding mode option this option sets the audio coding mode. If the current audio bit-rate is outside the bit-rate range suppor...

  • Page 195

    Operating the equipment locally — setup menu: audio menu - linear pcm [direct]/via src] menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-85 st.Re.E10137.3 clip level option this option is only displayed if the audio source is set to analogue. It enables the audio clip level to be...

  • Page 196

    Operating the equipment locally — setup menu: audio menu - linear pcm [direct]/via src] menu page 4-86 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.93: smpte 302m standard options selected option description 1998 standard refers to the 1998 smpte 302m standard. 200...

  • Page 197: 4.7.6

    Operating the equipment locally — setup menu: audio menu - linear pcm [direct]/via src] menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-87 st.Re.E10137.3 pcr on audio pid option this option controls whether pcr should be signalled on the audio pid. This may be necessary if an au...

  • Page 198: 4.7.7

    Operating the equipment locally — setup menu: audio menu - linear pcm [direct]/via src] menu page 4-88 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.7.7 advanced audio coding (m2/eom/advaud) overview the advanced audio coding menu is selected from the audio menu. See figu...

  • Page 199

    Operating the equipment locally: audio menu – advanced audio coding (m2/eom/advaud) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-89 st.Re.E10137.3 coding mode 3/2l(l,c,r,ls, rs,lfe) 3/2(l,c,r,ls,rs) 2/0 (l,r) 1+1 a 3 3 3 3 b 2 2 3 3 c 2 2 3 3 advanced audio… d 3 3 3 3 figure 4.13:...

  • Page 200

    Operating the equipment locally: audio menu – advanced audio coding (m2/eom/advaud) page 4-90 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.100: coding mode options (aac) coding mode input 5.1 7.1 channel a a front l+r b b center + subwoofer c c surround l + r - d r...

  • Page 201

    Operating the equipment locally: audio menu – advanced audio coding (m2/eom/advaud) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-91 st.Re.E10137.3 language or language left/right option this enables the language of the audio channel to be set. If the coding mode is dual mono, then...

  • Page 202

    Operating the equipment locally: audio menu – advanced audio coding (m2/eom/advaud) page 4-92 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 level [l] option this indicates the input level of the left audio channel. It is for status only and cannot be changed. Level [r] opti...

  • Page 203: 4.8 Data

    Operating the equipment locally data menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-93 st.Re.E10137.3 4.8 data menu 4.8.1 introduction the data menu is selected from the setup menu. This menu permits the selection of rs-232 asynchronous data and rs-422 synchronous data channel ...

  • Page 204

    Operating the equipment locally: data menu page 4-94 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.104: data a – rs232 encoding option modes selected option description off on(wegener) if on (wegener) is selected, the stream is identified in the pmt as a component o...

  • Page 205: 4.8.3

    Operating the equipment locally data menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-95 st.Re.E10137.3 notes… 1. This option is only available in tandberg mode. 2. This can result in wasted bandwidth due to low packet occupancy. Also results in a higher packet rate which may cau...

  • Page 206: 4.8.4

    Operating the equipment locally: data menu page 4-96 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 rs422 pid option this option is used for entering or updating data pids. To be dvb compliant, pids below 32 are reserved. Therefore pids 32 to 8191 are available for use. In t...

  • Page 207: 4.9 Output

    Operating the equipment locally data menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-97 st.Re.E10137.3 table 4.108: encoding options selected option description on(bisskeys) similar to on(tspkt data), additionally, aca descriptor is placed in the cat. Ca_system_id=0x1001. The ca...

  • Page 208: 4.9.3

    Operating the equipment locally: output menu - descriptor type = terrestrial page 4-98 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.9.3 delivery descriptor menu access the delivery descriptor menu from the output menu. The screens in this menu vary according to the descr...

  • Page 209

    Operating the equipment locally: output menu - descriptor type = terrestrial reference guide: voyager e5784 and e5788 hd dsng encoder page 4-99 st.Re.E10137.3 note… refer to annex k for details of pro mpeg fec for ip streaming in e57xx encoders. Figure 4.15: menu hierarchy – setup/output menu ts inp...

  • Page 210: 4.9.5

    Operating the equipment locally: output menu - descriptor type = terrestrial page 4-100 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.9.5 descriptor type = terrestrial band plan option access the band plan option from the delivery descriptor menu. Once a country has been ...

  • Page 211

    Operating the equipment locally: output menu - descriptor type = terrestrial reference guide: voyager e5784 and e5788 hd dsng encoder page 4-101 st.Re.E10137.3 table 4.112: frequency options selected option description min: 0.0001 mhz max: 42949.6729 mhz step size: 0.0001 mhz carrier frequency of tr...

  • Page 212

    Operating the equipment locally: output menu - descriptor type = terrestrial page 4-102 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 fec (hp) and fec (lp) options access the fec (hp) or the fec (lp) option from the delivery descriptor menu . These screens enable the inner ...

  • Page 213: 4.9.6

    Operating the equipment locally: output menu - descriptor type = terrestrial reference guide: voyager e5784 and e5788 hd dsng encoder page 4-103 st.Re.E10137.3 table 4.118: carriers options selected option description 2k mode terrestrial transmitter uses 2k transmission mode (2k carriers in an ofdm ...

  • Page 214: 4.9.7

    Operating the equipment locally: output menu - descriptor type = cable page 4-104 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 fec (inner) option access the fec (inner) option from the delivery descriptor menu. This screen enables the inner fec rate used by the cable chann...

  • Page 215: 4.9.8

    Operating the equipment locally: output menu - descriptor type = satellite reference guide: voyager e5784 and e5788 hd dsng encoder page 4-105 st.Re.E10137.3 symbol rate see symbol rate option on page 4-104. Orbital position option access the orbital position option from the delivery descriptor menu...

  • Page 216

    Operating the equipment locally: output menu - descriptor type = satellite page 4-106 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.128: ts input source options selected option description backplane asi1 asi2 if output option access the if output option from the sat...

  • Page 217

    Operating the equipment locally: output menu - descriptor type = satellite reference guide: voyager e5784 and e5788 hd dsng encoder page 4-107 st.Re.E10137.3 symbol rate option access the symbol rate option from the satellite modulator menu. Table 4.132: symbol rate options valid input range descrip...

  • Page 218

    Operating the equipment locally: output menu - descriptor type = satellite page 4-108 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.134: tx bandwidth factor options valid input range description min: 1 max: 2 step size: 0.01 tx bandwidth option the tx bandwidth opti...

  • Page 219

    Operating the equipment locally: output menu - descriptor type = satellite reference guide: voyager e5784 and e5788 hd dsng encoder page 4-109 st.Re.E10137.3 sat orb pos option access the sat orb pos option from the satellite modulator menu. This enables the orbital position of the satellite to be s...

  • Page 220: 4.9.9

    Operating the equipment locally: output menu - descriptor type = satellite page 4-110 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 • bb rnf f/w release option • if card type option • dpc card type option 4.9.9 output format = satellite modulator (l-band output) ts input so...

  • Page 221

    Operating the equipment locally: output menu - output format = satellite modulator (l-band output) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-111 st.Re.E10137.3 symbol rate option refer to symbol rate option on page 4-107 for details. Exactly the same except that table 4.132 sho...

  • Page 222

    Operating the equipment locally: output menu - output format = satellite modulator (l-band output) page 4-112 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 sat orb pos option refer to sat orb pos option on page 4-109 for details. Sat west/east option refer to sat west/east ...

  • Page 223

    Operating the equipment locally: output menu - output format = ip streamer (m2/eom2/ip/profec) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-113 st.Re.E10137.3 network mask option access the network mask option from the ip streamer menu . This is the network mask setting correspond...

  • Page 224

    Operating the equipment locally: output menu - output format = ip streamer (m2/eom2/ip/profec) page 4-114 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 destination x udp port option up to four separate udp ports can be assigned. This configures the udp destination port fiel...

  • Page 225

    Operating the equipment locally: output menu - output format = g.703 output reference guide: voyager e5784 and e5788 hd dsng encoder page 4-115 st.Re.E10137.3 this option allows the output g.703 ds-3 signal level to be increased if the receiving end is placed some distance away (> 68 metres (225 fee...

  • Page 226: 4.10 Mux

    Operating the equipment locally: output menu - output format = g.703 output page 4-116 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 mode option this option cannot be altered and should always be displayed as mkii. This indicates that the g.703 card portion of the g.703 int...

  • Page 227

    Operating the equipment locally: mux menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-117 st.Re.E10137.3 4.10.3 mux output, with remux card to obtain an output when a remux card is fitted, set the options in the following menus: • host bit-rate option on page 4-136 • remux module...

  • Page 228

    Operating the equipment locally: mux menu page 4-118 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 4.16: menu hierarchy – setup/mux menu (dvb) — output — source (bnc) — name (in) — name out — service prov (in) — service id (out) — logical channel — ca input — biss ke...

  • Page 229

    Operating the equipment locally: mux menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-119 st.Re.E10137.3 figure 4.17: menu hierarchy – setup/mux menu (atsc) — output — source (bnc) — short name in — short name out — name in — name out — program number (out) — major channel — mino...

  • Page 230: 4.10.5  On Air Option

    Operating the equipment locally: mux menu page 4-120 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.10.4 packet length option this option enables the packet length to be set. Table 4.144: packet length options selected option description 188 bytes uses 188 byte packet form...

  • Page 231: 4.10.8  Pcr Pid Option

    Operating the equipment locally: mux menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-121 st.Re.E10137.3 table 4.147: clock options selected option description local oscillator the system clock is derived from the local oscillator. Hsync (external) the system clock is locked to t...

  • Page 232

    Operating the equipment locally: mux menu page 4-122 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.149: scramble options (ras) selected option description off encoder output is not scrambled. Ras (fixed 1) encoder output is scrambled using the fixed ras key assigned...

  • Page 233

    Operating the equipment locally: mux menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-123 st.Re.E10137.3 scramble option access the scramble option from the mux menu. This enables security scrambling of the encoder transmission to be switched on or off. Note… if the scrambling is...

  • Page 234: 4.11.1 Overview

    Operating the equipment locally: mux menu page 4-124 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 biss-e injected id option access the biss-e injected id option from the mux menu. This is only used with biss-e and is an identifier for the unit, comprising a 56-bit hexadeci...

  • Page 235

    Operating the equipment locally: atm network interface option module reference guide: voyager e5784 and e5788 hd dsng encoder page 4-125 st.Re.E10137.3 shaded options are showing status and cannot be changed. Atm menu setup menu add connection delete connection view connection list.... View connecti...

  • Page 236

    Operating the equipment locally: atm network interface option module page 4-126 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.11.3 delete connection option the delete connection option displays a list of currently active connections. The list may be empty if there are no ...

  • Page 237: 4.11.6 Add

    Operating the equipment locally: atm network interface option module reference guide: voyager e5784 and e5788 hd dsng encoder page 4-127 st.Re.E10137.3 4.11.6 add profile menu overview access the profile menu from the atm menu. Then press the profile softkey. Change the option to ‘active’ and press ...

  • Page 238

    Operating the equipment locally: atm network interface option module page 4-128 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.155: atm address options selected option description 0 to 255 enter the atm address value. Vpi option note… this option is only shown when v...

  • Page 239: 4.11.7 Delete

    Operating the equipment locally: atm network interface option module reference guide: voyager e5784 and e5788 hd dsng encoder page 4-129 st.Re.E10137.3 table 4.159: aal options selected option description aal1 fec atm adaptation layer and forward error correction, used with the mpeg transport stream...

  • Page 240: 4.11.13 General Menu

    Operating the equipment locally: atm network interface option module page 4-130 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table 4.161: delete authorisation options selected option description retain keeps the authorisation. Delete deletes the authorisation. 4.11.11 edit...

  • Page 241: 4.11.14 Tx Menu

    Operating the equipment locally: atm network interface option module reference guide: voyager e5784 and e5788 hd dsng encoder page 4-131 st.Re.E10137.3 def uni version option this option is the default user to network interface (uni) protocol version used to communicate with the atm network, defined...

  • Page 242: 4.11.15 Rx Menu

    Operating the equipment locally: atm network interface option module page 4-132 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 aal5 pcr aware option this is an alternative aal-5 transmission mode.Use the + and – softkeys to alternate between on and off and then press enter a...

  • Page 243

    Operating the equipment locally: atm network interface option module reference guide: voyager e5784 and e5788 hd dsng encoder page 4-133 st.Re.E10137.3 table 4.168: cdv tolerance options valid input range description min: 0 µsec max: 4000 µsec step size: 1 µsec the maximum atm network cell delay var...

  • Page 244: 4.11.16 Physical Menu

    Operating the equipment locally: atm network interface option module page 4-134 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.11.16 physical menu mode option match the setting to that of the connected network, normally set to sdh. Table 4.171: mode options marketing code ...

  • Page 245

    Operating the equipment locally: atm network interface option module reference guide: voyager e5784 and e5788 hd dsng encoder page 4-135 st.Re.E10137.3 cell mode option this specifies how null cells should be flagged on the interface, normally ‘unassigned’. Table 4.174: cell mode options selected op...

  • Page 246: 4.12 Remux

    Operating the equipment locally: remux page 4-136 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.12 remux menu 4.12.1 introduction if the remux option module m2/eom2/remux is fitted, there is an additional item in the mux menu (see figure 4.16) and a further remux module m...

  • Page 247

    Operating the equipment locally: remux reference guide: voyager e5784 and e5788 hd dsng encoder page 4-137 st.Re.E10137.3 selected option description new services default this specifies whether new services detected on a remux input will be on (i.E. Mapped through) or off by default. (if pid remap s...

  • Page 248: 4.12.4 1.Service/2.Service

    Operating the equipment locally: remux page 4-138 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.12.4 1.Service/2.Service menu output option this option enables the output to be set. Table 4.177: output options selected option description off the service is not included in...

  • Page 249

    Operating the equipment locally: remux reference guide: voyager e5784 and e5788 hd dsng encoder page 4-139 st.Re.E10137.3 name out option this option allows the service output name to be changed. Service prov (in) option note… this option is only shown on an incoming service menu (2-13.Service menu)...

  • Page 250

    Operating the equipment locally: remux page 4-140 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 this option enables the minor channel to be specified. Logical channel option this option enables a number to be given to the logical channel. Ca input option note… this option i...

  • Page 251

    Operating the equipment locally: remux reference guide: voyager e5784 and e5788 hd dsng encoder page 4-141 st.Re.E10137.3 table 4.182: pcr pid options selected option description min: 1 max: 8190 (1ffeh) step size: 1 video option note… this option is status only for the host encoder but can be chang...

  • Page 252

    Operating the equipment locally: remux page 4-142 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 audio (type of audio) option notes… 1. This option is status only for the host encoder but can be changed for incoming services. 2. The option could be audio (mpeg-2), audio (dol...

  • Page 253: 4.13.1 Option

    Operating the equipment locally: digital programme insertion (dpi) reference guide: voyager e5784 and e5788 hd dsng encoder page 4-143 st.Re.E10137.3 4.13 digital programme insertion (dpi) menu 4.13.1 option availability this option is only available from the systems menu when the m2/eso2/dpi licenc...

  • Page 254

    Operating the equipment locally: digital programme insertion (dpi) page 4-144 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 notes… 1. Some of the options may be different or unavailable in other dpi modes. 2. The stream carrying the splice information is referenced in pmt a...

  • Page 255: 4.14  Errors Menu

    Operating the equipment locally: errors reference guide: voyager e5784 and e5788 hd dsng encoder page 4-145 st.Re.E10137.3 4.14 errors menu 4.14.1 overview the errors menu can be selected from the advanced menu. New errors are reported to the front panel display approximately every 30 seconds. 4.14....

  • Page 256: 4.15  Diagnostics Menu

    Operating the equipment locally: errors page 4-146 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 4.20: menu hierarchy – error masks menu 4.14.4 masked active errors if an active error is masked, it appears in the masked list where the error is noted and may be passed...

  • Page 257: 4.16 Configs

    Operating the equipment locally: configs menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-147 st.Re.E10137.3 4.16 configs menu 4.16.1 accessing the menu the configs menu can be selected from the summary screen by pressing the cfgs softkey or from the advanced menu by pressing the...

  • Page 258

    Operating the equipment locally: configs menu page 4-148 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 user configurations configurations loaded into the user flash become user configurations. Any one of the user configurations can be loaded as an active configuration (load...

  • Page 259

    Operating the equipment locally: configs menu reference guide: voyager e5784 and e5788 hd dsng encoder page 4-149 st.Re.E10137.3 4.16.3 quick configuration from the summary screen the sixteen predefined user configurations are a quick and easy way to configure the encoder without having to enter ind...

  • Page 260

    Operating the equipment locally: configs menu page 4-150 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 4.16.8 factory hd defaults option this option enables the 16 user configurations to be overwritten by the factory default settings..

  • Page 261: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 5-1 st.Re.E10137.3 chapter 5 5. Web browser interface contents 5.1 introduction ............................................................... 5-3 5.2 how to set up internet explorer for the web browser interface............................

  • Page 262

    Web browser interface page 5-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 263: 5.1 Introduction

    Web browser interface reference guide: voyager e5784 and e5788 hd dsng encoder page 5-3 st.Re.E10137.3 5.1 introduction there is a range of diagnostic and other utilities that can be accessed via a web browser, such as internet explorer. Before these can be accessed it is important to ensure that th...

  • Page 264

    Web browser interface page 5-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 5.2: settings dialog box 4. For check for newer versions of stored pages, select every visit to the page or any changes made to the pages will not be displayed. Click ok to save the changes ...

  • Page 265

    Web browser interface reference guide: voyager e5784 and e5788 hd dsng encoder page 5-5 st.Re.E10137.3 6. Click lan settings to open the local area network (lan) settings dialog box (see figure 5.4). Figure 5.4: local area network (lan) settings dialog box 7. Click advanced to open the proxy setting...

  • Page 266: 5.3

    Web browser interface page 5-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 8. In the exceptions area type the ip address of the encoder. 9. Click ok as many times as necessary to close all dialog boxes until only the internet explorer window is open. For internet explorer...

  • Page 267

    Web browser interface reference guide: voyager e5784 and e5788 hd dsng encoder page 5-7 st.Re.E10137.3 nv event log - shows the actions which have been performed since the encoder was last switched on external control – gives the ip addresses of external equipment which can control the encoder. • ut...

  • Page 268: 5.4 Fault

    Web browser interface page 5-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 • stored configs load config gives a list of preconfigured settings. Save config saves the current setting to an existing prenamed configuration. Extract file - ‘config’ - ‘flashcfg’ - ‘clone’ 5.4 ...

  • Page 269: 5.5

    Web browser interface reference guide: voyager e5784 and e5788 hd dsng encoder page 5-9 st.Re.E10137.3 5.5 cloning a file a particularly useful feature of the encoder is the ability to extract a clone file. This can be sent to tandberg television and used to configure other encoders to exactly the s...

  • Page 270

    Web browser interface page 5-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 271: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page 6-1 st.Re.E10137.3 chapter 6 6. Preventive maintenance and fault- finding contents 6.1 introduction ............................................................... 6-3 6.2 preventive maintenance...............................................

  • Page 272

    Preventive maintenance and fault-finding page 6-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 273: 6.1 Introduction

    Preventive maintenance and fault-finding reference guide: voyager e5784 and e5788 hd dsng encoder page 6-3 st.Re.E10137.3 6.1 introduction this chapter provides the schedules and instructions, where applicable, for routine inspection, cleaning and maintenance of the equipment which should be perform...

  • Page 274: 6.3

    Preventive maintenance and fault-finding page 6-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 replacement parts when replacement parts are required, be sure the service technician has used parts specified by the manufacturer or which have the same characteristics as the o...

  • Page 275: 6.4

    Preventive maintenance and fault-finding reference guide: voyager e5784 and e5788 hd dsng encoder page 6-5 st.Re.E10137.3 6.4 errors and diagnostics menus – when to use them 6.4.1 error messages figure 6.1: finding the errors menu investigate any run-time errors by pressing the active errors softkey...

  • Page 276

    Preventive maintenance and fault-finding page 6-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure 6.2: finding the diagnostics menu lcd display test press the lcd display softkey to access the option and then press any key to cycle through the test patterns and to retu...

  • Page 277: 6.5 Fault-Finding

    Preventive maintenance and fault-finding reference guide: voyager e5784 and e5788 hd dsng encoder page 6-7 st.Re.E10137.3 6.5 fault-finding 6.5.1 fault-finding philosophy it is the objective of this chapter to provide sufficient information to enable the operator to rectify apparent faults or else t...

  • Page 278: 6.5.3

    Preventive maintenance and fault-finding page 6-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 when the failure condition has been fully investigated, and the symptoms are known, proceed with fault-finding according to the observed symptoms. If the fault persists, and cann...

  • Page 279: 6.5.4 Video

    Preventive maintenance and fault-finding reference guide: voyager e5784 and e5788 hd dsng encoder page 6-9 st.Re.E10137.3 6.5.4 video fault-finding fault symptoms table 6.1: video fault-finding problem what to do video input lock error check video input. Video - wrong line standard check which video...

  • Page 280: 6.7

    Preventive maintenance and fault-finding page 6-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 when transmitting 4:2:2 2 mode into systems using the earlier system 3000 pro ird m2/psr/3/422bas then the rate buffer mode of the encoder must be set to 'small'. However, when ...

  • Page 281: 6.8.3

    Preventive maintenance and fault-finding reference guide: voyager e5784 and e5788 hd dsng encoder page 6-11 st.Re.E10137.3 step action if result of action is yes… if result of action is no… the top? ‘i’ is at the top. If the problem persists proceed to next step. 2 check power led. Is the encoder st...

  • Page 282: 6.9.2 Lithium

    Preventive maintenance and fault-finding page 6-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 6.9.2 lithium batteries the equipment uses the dallas semiconductor nvram ds1746wp which contains a dallas ds9034pcx power cap lithium battery. This cell is not a usa environmen...

  • Page 283

    Reference guide: voyager e5784 and e5788 hd dsng encoder page a-1 st.Re.E10137.3 annex a a. Glossary the following list covers most of the abbreviations, acronyms and terms as used in tandberg television limited manuals, user and reference guides. All terms may not be included in this reference guid...

  • Page 284

    Glossary page a-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b3zs bipolar with three zero substitution: a method of eliminating long zero strings in a transmission. It is used to ensure a sufficient number of transitions to maintain system synchronisation when the user d...

  • Page 285

    Glossary reference guide: voyager e5784 and e5788 hd dsng encoder page a-3 st.Re.E10137.3 compression reduction in the number of bits used to represent the same information. For the purposes of a broadcast system, it is the process of reducing digital picture information by discarding redundant port...

  • Page 286

    Glossary page a-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 dvb-pi dvb-professional interfaces: ttv lan search shows – dvb physical interfaces earth technical earth: ensures that all equipment chassis within a rack are at the same potential, usually by connecting a wire...

  • Page 287

    Glossary reference guide: voyager e5784 and e5788 hd dsng encoder page a-5 st.Re.E10137.3 icam integrated conditional access module: embedded in the ird and responsible for descrambling, plus packet filtering and reception. It also contains the physical interface to the subscriber’s viewing card. Ie...

  • Page 288

    Glossary page a-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 lo local oscillator. Lsb least significant bit. Luminance the television signal representing brightness, or the amount of light at any point in a picture. The y in yc r c b. Lvds low voltage differential signal...

  • Page 289

    Glossary reference guide: voyager e5784 and e5788 hd dsng encoder page a-7 st.Re.E10137.3 nm nanometre: a unit of length equal to one thousand millionth (10 -9 ) of a metre. Ntsc national television systems committee: the group, which developed analogue standards used in television broadcast systems...

  • Page 290

    Glossary page a-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 ppv pay per view: a system of payment for viewing services based on a usage / event basis rather than on on-going subscription. Subscribers must purchase viewing rights for each ppv event that they wish to view...

  • Page 291

    Glossary reference guide: voyager e5784 and e5788 hd dsng encoder page a-9 st.Re.E10137.3 stb set-top box: a box that sits on top of a television set and is the interface between the home television and the cable tv company. New technologies evolving for set-top boxes are video-on-demand, video game...

  • Page 292

    Glossary page a-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 transport stream packet header a data structure used to convey information about the transport stream payload. Ts transport stream. Tsdt transport stream descriptor table: a component of the mpeg-2 psi data. T...

  • Page 293: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page b-1 st.Re.E10137.3 annex b b. Technical specification contents b.1 inputs ......................................................................B-3 b.1.1 video ............................................................B-3 sdi..............

  • Page 294

    Technical specification page b-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 m2/eom2atms155e stm-1 electrical module ....................................................... B-28 b.11.4 m2/eom2/ip, ip output card option......... B-28 b.11.5 general purpose interface card (...

  • Page 295: B.1 Inputs

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-3 st.Re.E10137.3 b.1 inputs b.1.1 video sdi table b.1: serial digital video specification item specification safety status selv connector designation sdi in connector type 75 Ω bnc female socket input standard (u...

  • Page 296

    Technical specification page b-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 h sync table b.2: h sync specification item specification safety status selv connector designation h sync connector type 75 Ω bnc female socket input standard 625 line pal, 525 line pal-m or 525 ...

  • Page 297

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-5 st.Re.E10137.3 table b.4: encoder settings for pal/ntsc video performance figures item specification noise reduction off video bit-rate 8 mbit/s resolution 720 x 576 gop ibbp profile 422p@ml packet length 188 m...

  • Page 298

    Technical specification page b-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 ntsc video performance figures table b.6: ntsc system video performance figures pattern item specification input return loss 30 db ntc-7 composite jitter ± 5 ns ntc-7 composite bar amplitude ref ...

  • Page 299: B.1.2 Audio

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-7 st.Re.E10137.3 video coding resolutions table b.8: video coding resolutions selected option shd mode description 625 line modes 525 line modes auto (720x576) 720 x576 704 x576 640 x576 544 x576 528 x576 480 x57...

  • Page 300

    Technical specification page b-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 item specification output (digital) ref aes/ebu digital impedance 75 Ω sampling rate 48 khz coding standards coding standard mpeg-1 layer 2 (iso/iec 11172) supported coding modes single mono, dua...

  • Page 301

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-9 st.Re.E10137.3 item specification 20 hz – 63 hz +0.0 to - 0.5 db 100 hz – 10 khz +0.2 to - 0.3 db 12.5 hz – 18 khz +0.2 to - 0.5 db 20 khz 0 to -1.5 db crosstalk @ 0 dbs b 100 hz 72 db 1 khz 74 db 6.3 khz 67.5 ...

  • Page 302

    Technical specification page b-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table b.11: embedded audio specification item specification serial digital interface safety status selv connector designation sdi in connector type bnc female connector input standard itu-r recm...

  • Page 303: B.1.3 L-Band

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-11 st.Re.E10137.3 dolby digital audio encoding bit-rates table b.14: dolby digital audio encoding bit-rates bit-rate (kbit/s) single channel mono (1/0) dual channel stereo (2/0) 56 9 - 64 9 - 80 9 - 96 9 9 112 9 ...

  • Page 304: B.2 Test

    Technical specification page b-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b.2 test tones table b.16: test tones specification item specification level 0 db relative to fsr 18 db frequency 1 khz at 48 khz sampling frequency bit-rate 96 kbit/s b.3 outputs b.3.1 if outpu...

  • Page 305: B.3.2 L-Band

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-13 st.Re.E10137.3 item specification phase noise (continuous): −66 dbc/hz at 100 hz offset −76 dbc/hz at 1 khz offset −86 dbc/hz at 10 khz offset −96 dbc/hz at 100 khz offset −120 dbc/hz at 1 mhz offset and above...

  • Page 306

    Technical specification page b-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 item specification symbol rate: 1 to 48 msymbol/s (standard) 0.2 to 66 msymbol/s (extended symbol rate option) note… for certain combinations of modulation format, fec code rate and input packet...

  • Page 307: B.3.3 Reference

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-15 st.Re.E10137.3 b.3.3 reference frequency output a reference frequency output is provided via the l-band out main connector, intended for use by an external frequency up-converter. Table b.21: reference frequen...

  • Page 308: B.4.3 Alarm

    Technical specification page b-16 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b.4.3 alarm table b.24: alarm specification item specification safety status selv connector designation alarm connector type 9-way d-type male alarm contacts change-over contacts (5 Ω in common)...

  • Page 309: B.5.2 Rs-422

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-17 st.Re.E10137.3 b.5.2 rs-422 data this provides an rs-422 synchronous, serial communications data input interface. Table b.27: rs-422 data specification item specification safety status selv type itu-t v.11 (rs...

  • Page 310: B.6

    Technical specification page b-18 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b.6 ac power supply this equipment is fitted with an wide-ranging power supply. It is suitable for supply voltages of 100-120 vac -10% +6% or 220-240 vac -10% +6% at 50/60 hz nominal. Table b.28...

  • Page 311: B.8 Environmental

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-19 st.Re.E10137.3 b.8 environmental conditions table b.30: environmental specification item specification operational temperature -10 °c to +50°c (14°f to 122°f) ambient with free air-flow over temperature alarm ...

  • Page 312: B.9.2 Emc

    Technical specification page b-20 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b.9.2 emc 2 the equipment has been designed and tested to meet the following: en 55022 and cispr22 european international emission standard limits and methods of measurement of radio frequency i...

  • Page 313: B.9.4 Ce

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-21 st.Re.E10137.3 b.9.4 ce marking the ce mark is affixed to indicate compliance with the following directives: 89/336/eec of 3 may 1989 on the approximation of the laws of the member states relating to electroma...

  • Page 314: B.11 Option

    Technical specification page b-22 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b.11 option modules b.11.1 m2/eom2/audlin2 additional audio and linear pcm option module see section b.1.2 for details. B.11.2 m2/eom2/remux remux option module connectors table b.32: dvb asi in...

  • Page 315

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-23 st.Re.E10137.3 leds table b.34: dvb asi in 1, 2 and 3 - led indications item specification red led input asi lock on no lock on asi (8b/10b coding) off input asi lock ok green led packet size off not locked to...

  • Page 316: Module

    Technical specification page b-24 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 b.11.3 m2/eom2/atms155… atm network interface module variants of the atm network interface module to provide the interface to the b-isdn telecommunications network, a physical layer module must ...

  • Page 317

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-25 st.Re.E10137.3 10baset ethernet connector table b.39: ethernet connector item specification safety status selv connector designation ethernet channel rate 10 mbit/s data coding manchester coding specification ...

  • Page 318

    Technical specification page b-26 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table b.41: monomode fibre optic connector item specification connector type sc type connector designation sdh stm-1/oc3 (mono) data rate 155.520 mbit/s centre wavelength 1261 nm (min) 1360 nm (...

  • Page 319

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-27 st.Re.E10137.3 m2/eom2atms45 pdh/ds3 connector table b.44: ds3, g.703 input connector item specification connector type 75 Ω bnc, female connector designation atm-pdh-ds3 in data-rate 44.736 mbit/s data coding...

  • Page 320

    Technical specification page b-28 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 m2/eom2atms155e stm-1 electrical module table b.46: sdh (stm-1e) copper input connector item specification safety status selv connector designation atm-sdh-stm1/e in connector type bnc, female c...

  • Page 321

    Technical specification reference guide: voyager e5784 and e5788 hd dsng encoder page b-29 st.Re.E10137.3 b.11.5 general purpose interface card (m2/eom2/gpi) table b.49: gpi connector item specification safety status selv connector designation gpi connector type d-type, 15-way, male input 1: open-ci...

  • Page 322

    Technical specification page b-30 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 323

    Reference guide: voyager e5784 and e5788 hd dsng encoder page c-1 st.Re.E10137.3 annex c c. Language abbreviations languages are shown in alphabetical order. Language abbreviation afrikaans afr albanian alb arabic ara auxiliary two basa bas basque baq bengali ben breton bre bulgarian bul burmese bur...

  • Page 324

    Language abbreviations page c-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 language abbreviation swedish swe tagalog tgl tamil tam telugu tel thai tha tibetan tib turkish tur ukranian ukr undefined und urdu urd vietnamese vie welsh cym xhosa xho yoruba yor zulu zul there...

  • Page 325: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page d-1 st.Re.E10137.3 annex d d. Creating and downloading a logo contents d.1 introduction ...............................................................D-3 d.2 summary of features ...............................................D-3 d.3 osd ...

  • Page 326

    Creating and downloading a logo page d-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 327: D.1 Introduction

    Creating and downloading a logo reference guide: voyager e5784 and e5788 hd dsng encoder page d-3 st.Re.E10137.3 d.1 introduction the encoder includes a logo overlay facility whereby an image can be overlaid onto the active video prior to encoding. This enables broadcasters to trademark or brand the...

  • Page 328

    Creating and downloading a logo page d-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 figure d.1: web browser interface the dialog box, see figure d.2, will be displayed. Figure d.2: file download dialogue box clicking on option open this file from its current location and...

  • Page 329: D.4

    Creating and downloading a logo reference guide: voyager e5784 and e5788 hd dsng encoder page d-5 st.Re.E10137.3 figure d.3: files for osd creator and loader d.4 creating a logo using osd creator osd creator (creator.Exe) is an application for creating logo files (.Osd format) for use with the osd l...

  • Page 330: D.5.2

    Creating and downloading a logo page d-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 an example of a logo is shown in figure d.4. Figure d.4: osd creator screen showing example logo d.5.2 loading a .Bmp file select file/open from the menu, and choose a file with a .Bmp ex...

  • Page 331

    Creating and downloading a logo reference guide: voyager e5784 and e5788 hd dsng encoder page d-7 st.Re.E10137.3 osd creator uses a colour palette with a maximum of 256 entries. Each pixel in the image is mapped to an entry in the palette, which holds a value for the red, green and blue and transpar...

  • Page 332: D.5.4 Downsampling

    Creating and downloading a logo page d-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 click the key file toolbar button. Select the key file. The inactive area of the image should now be transparent (background-coloured). Change the background colour to verify that the cor...

  • Page 333: D.6

    Creating and downloading a logo reference guide: voyager e5784 and e5788 hd dsng encoder page d-9 st.Re.E10137.3 d.6 downloading a logo using osd loader the osd loader application (osd.Exe) is used for downloading logo (.Osd) files to the encoder and controlling which are displayed. The application ...

  • Page 334: D.7.2

    Creating and downloading a logo page d-10 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 the resolution mode must be set to match the video resolution being used. This adjusts the preview screen to the dimensions of the active video. Table d.1: resolution modes resolution mo...

  • Page 335

    Creating and downloading a logo reference guide: voyager e5784 and e5788 hd dsng encoder page d-11 st.Re.E10137.3 576 lines 1 720 720 pixels digital active picture 702 pixels analogue active picture pixel 1 2 line field 23 336 337 338 24 25 623 310 osd loader co-ordinates (858,619) osd loader co-ord...

  • Page 336: D.7.3

    Creating and downloading a logo page d-12 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 d.7.3 show and hide regions the download button defines a region in the encoder, which remains until the encoder is turned off, the remove button is clicked, or the region is downloaded ...

  • Page 337: D.8 Fault-Finding

    Creating and downloading a logo reference guide: voyager e5784 and e5788 hd dsng encoder page d-13 st.Re.E10137.3 d.8 fault-finding if there appears to be a problem creating or downloading a logo check the following: • if the communications box reads ‘error creating socket’, there may be a problem w...

  • Page 338

    Creating and downloading a logo page d-14 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 339: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page e-1 st.Re.E10137.3 annex e e. Band plans contents e.1 channels and centre frequencies ...........................E-3 list of tables table e.1: australia .......................................................................E-3 table e.2:...

  • Page 340

    Band plans page e-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 341: E.1

    Band plans reference guide: voyager e5784 and e5788 hd dsng encoder page e-3 st.Re.E10137.3 e.1 channels and centre frequencies the output menu has options called band plan and channel (see chapter 4, operating the equipment locally). Once a country has been selected in the band plan option then the...

  • Page 342

    Band plans page e-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table e.2: europe vhf uhf channel centre frequency in mhz uhf channel centre frequency in mhz e 2 50.500 e 8 198.500 e 3 57.500 e 9 205.500 e 4 64.500 e 10 212.500 e 5 177.500 e 11 219.500 e 6 184.500 e 12 22...

  • Page 343

    Band plans reference guide: voyager e5784 and e5788 hd dsng encoder page e-5 st.Re.E10137.3 table e.6: new zealand uhf channel centre frequency in mhz uhf channel centre frequency in mhz 1 47.500 6 191.500 2 57.500 7 198.500 3 64.500 8 205.500 4 177.500 9 212.500 5 184.500 10 219.500 table e.7: chin...

  • Page 344

    Band plans page e-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table e.9: ireland uhf channel centre frequency in mhz uhf channel centre frequency in mhz i a 48.500 i f 194.000 i b 56.500 i g 202.000 i c 64.500 i h 210.000 i d 178.000 i j 218.000 i e 186.000 table e.10: ...

  • Page 345

    Band plans reference guide: voyager e5784 and e5788 hd dsng encoder page e-7 st.Re.E10137.3 table e.12: france uhf channel centre frequency in mhz uhf channel centre frequency in mhz a 45.000 2 186.750 b 53.000 3 194.750 c 61.000 4 202.750 c1 57.750 5 210.750 1 178.750 6 218.750 table e.13: japan uh...

  • Page 346

    Band plans page e-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table e.14: usa uhf channel centre frequency in mhz uhf channel centre frequency in mhz uhf channel centre frequency in mhz uhf channel centre frequency in mhz a 02 57.000 23 527.000 44 653.000 65 779.000 a 0...

  • Page 347: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page f-1 st.Re.E10137.3 annex f f. Audio modes contents f.1 analogue audio.........................................................F-3 f.2 digital audio..............................................................F-3 f.3 embedded audio on the...

  • Page 348

    Audio modes page f-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 349: F.1 Analogue

    Audio modes reference guide: voyager e5784 and e5788 hd dsng encoder page f-3 st.Re.E10137.3 f.1 analogue audio figure f.1 shows the coding methods that may be used with the analogue audio input. Analogue audio code to linear pcm linear pcm internal coding musicam dolby (ac-3) independent of encoder...

  • Page 350: F.3

    Audio modes page f-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 f.3 embedded audio on the sdi figure f.3 shows the audio signal flow on the base board. While eight audio stereo pairs are available, only two stereo pairs can be processed by the base board at any one time....

  • Page 351

    Audio modes reference guide: voyager e5784 and e5788 hd dsng encoder page f-5 st.Re.E10137.3 4:1 4:1 group 1 group 2 group 3 group 4 group 1 group 2 group 3 group 4 sdi embedded 1 sdi embedded 2 audio router stereo pair a sdi embedded 4 de-embedder 1 de-embedder 2 interface and conversion stereo pai...

  • Page 352

    Audio modes page f-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 353

    Reference guide: voyager e5784 and e5788 hd dsng encoder page g-1 st.Re.E10137.3 annex g g. Accuracy of frequency sources this equipment is based around iso/iec 13818 specifications (commonly known as mpeg-2) and within these specifications all timing is derived from a 27 mhz system clock. The syste...

  • Page 354

    Accuracy of frequency sources page g-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 355: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page h-1 st.Re.E10137.3 annex h h. Use of remux card in atsc contents h.1 remux card in atsc with internal psip.................H-3 h.2 remux card in atsc with external psip................H-3.

  • Page 356

    Use of remux card in atsc page h-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 357: H.1

    Use of remux card in atsc reference guide: voyager e5784 and e5788 hd dsng encoder page h-3 st.Re.E10137.3 h.1 remux card in atsc with internal psip the encoder automatically remuxes atsc streams arriving at its inputs, as in dvb. The encoder uses the pat (program association table) and pmt (program...

  • Page 358

    Use of remux card in atsc page h-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 in this configuration the encoder generates the pat, cat and pmt for all programs but it is the responsibility of the user to provide all the psip for the associated programs. Any programs pres...

  • Page 359: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page i-1 st.Re.E10137.3 annex i i. Edh capability for e57xx encoders (sd only) contents i.1 edh capability for e57xx encoders .......................... I-3 list of tables table i.1: edh capability matrix for e57xx encoders.......................

  • Page 360

    Edh capability for e57xx encoders (sd only) page i-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 361: I.1

    Edh capability for e57xx encoders (sd only) reference guide: voyager e5784 and e5788 hd dsng encoder page i-3 st.Re.E10137.3 i.1 edh capability for e57xx encoders table i.1 contains edh capability for different mux firmware versions. To find the mux firmware version for a particular encoder refer to...

  • Page 362

    Edh capability for e57xx encoders (sd only) page i-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 363: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page j-1 st.Re.E10137.3 annex j j. Setting of the remux card for data/psip and dvb-subtitles input contents j.1 setting the remux card inputs................................. J-3 j.2 the dvb-subtitles input mode...................................

  • Page 364

    Setting of the remux card for data/psip and dvb-subtitles input page j-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 365: J.1

    Setting of the remux card for data/psip and dvb-subtitles input reference guide: voyager e5784 and e5788 hd dsng encoder page j-3 st.Re.E10137.3 j.1 setting the remux card inputs all the required settings are applied from a single menu, the service info sub-menu on the system menu. Each input mode o...

  • Page 366: J.2.2 The

    Setting of the remux card for data/psip and dvb-subtitles input page j-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 notes… 1. The ‘dvb-subtitles’ input mode will be available only when the syntax is: dvb. 2. Only one remux card input can be in ‘dvb-subtitles’ mode at any...

  • Page 367: J.3.2

    Setting of the remux card for data/psip and dvb-subtitles input reference guide: voyager e5784 and e5788 hd dsng encoder page j-5 st.Re.E10137.3 j.3.2 the setting sequence 1. Identify the remux card input that will be used to supply the data elementary streams. 2. For the selected input, change: rem...

  • Page 368: J.4.2 The

    Setting of the remux card for data/psip and dvb-subtitles input page j-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 j.4.2 the setting sequence 1. Identify which remux card input will supply the psip elementary streams. 2. For the selected input, change remux input # in m...

  • Page 369: J.5

    Setting of the remux card for data/psip and dvb-subtitles input reference guide: voyager e5784 and e5788 hd dsng encoder page j-7 st.Re.E10137.3 j.5 examples of complex setups j.5.1 example 1 - everything on one asi input in this example, an external generator provides both psip, psi tables and othe...

  • Page 370

    Setting of the remux card for data/psip and dvb-subtitles input page j-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 table j.4: example 2 - psi on one asi input, data on other inputs pmt pid = 0x10 (program number 2 is being used) video pid = 0x11 audio 1 pid = 0x14 port ...

  • Page 371: Contents

    Reference guide: voyager e5784 and e5788 hd dsng encoder page k-1 st.Re.E10137.3 annex k k. Pro-mpeg fec support for ip streaming in e57xx encoders contents k.1 introduction ...............................................................K-3 k.2 pro-mpeg fec .............................................

  • Page 372

    Pro-mpeg fec support for ip streaming in e57xx encoders page k-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 373: K.1 Introduction

    Pro-mpeg fec support for ip streaming in e57xx encoders reference guide: voyager e5784 and e5788 hd dsng encoder page k-3 st.Re.E10137.3 k.1 introduction with the v3.8.1 software release of the e57xx encoder, ip streaming corresponding to the pro-mpeg fec protocol is possible. This annex provides su...

  • Page 374: K.2.2

    Pro-mpeg fec support for ip streaming in e57xx encoders page k-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 k.2.2 configuring pro-mpeg fec protocol/pro-mpeg fec option when pro-mpeg fec is enabled this setting allows the ip output of the e57xx to be configured to work in...

  • Page 375: K.2.4

    Pro-mpeg fec support for ip streaming in e57xx encoders reference guide: voyager e5784 and e5788 hd dsng encoder page k-5 st.Re.E10137.3 best case is 10x10 = (10+10+100) / 100 = 5% k.2.4 recommendations for use of pro-mpeg fec overview there are no official recommendations within the pro-mpeg code o...

  • Page 376

    Pro-mpeg fec support for ip streaming in e57xx encoders page k-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 blank.

  • Page 377

    Reference guide: voyager e5784 and e5788 hd dsng encoder page l-1 st.Re.E10137.3 annex l l. Alarm list the following table lists the alarm and failure identifiers generated within the encoder. Alarm id alarm name alarm description level source module 00000000 lcd not found failed to initialise the l...

  • Page 378

    Alarm list page l-2 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 alarm id alarm name alarm description level source module 00000028 invalid pcr pid the selected pid value is out of range. Alarm general 00000029 system clock not locked input clock not locked to the external...

  • Page 379

    Alarm list reference guide: voyager e5784 and e5788 hd dsng encoder page l-3 st.Re.E10137.3 alarm id alarm name alarm description level source module error already 00000127 edh full field error already error on the video (sdi) input. Alarm video source 00000128 edh picture error error on the video (...

  • Page 380

    Alarm list page l-4 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 alarm id alarm name alarm description level source module 00000177 too many monochrome 4:2:2 lines a maximum of 2 lines per frame are permitted. Alarm vbi/userdata 00000178 video index/wss- afd not set in vbi...

  • Page 381

    Alarm list reference guide: voyager e5784 and e5788 hd dsng encoder page l-5 st.Re.E10137.3 alarm id alarm name alarm description level source module 00000285 pcr error unable to read the internal pcr count. Alarm audio a 00000286 silence timeout left the audio level of the left channel was below th...

  • Page 382

    Alarm list page l-6 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3 alarm id alarm name alarm description level source module 00000337 duplicate pid the selected pid value clashes with another. Alarm audio b 00000338 invalid pid the selected pid value is out of range. Alarm a...

  • Page 383

    Alarm list reference guide: voyager e5784 and e5788 hd dsng encoder page l-7 st.Re.E10137.3 alarm id alarm name alarm description level source module a new config download as a result of an error." 01000401 config update the data module is not responding correctly to the requested config. Alarm data...

  • Page 384

    Alarm list page l-8 reference guide: voyager e5784 and e5788 hd dsng encoder st.Re.E10137.3.