Tandy 900MHz Rechargeable Wireless Stereo Headphones Owner's manual - Troubleshooting
9
TROUBLESHOOTING
We do not expect you to have any problems with your headphones system. How-
ever, if you do have a problem, the following suggestions might help. If you cannot
solve the problem, take the system to your local RadioShack store for assistance.
Problem
Solution
No sound
Be sure the headphones are turned on.
Be sure the AC adapter is plugged in and has power.
Be sure the audio source is turned on and operating.
If you connected the headphones to jacks that are controlled
by the audio source’s volume control, turn up the audio
source’s volume control until the indicator light on the head-
phone’s transmitter lights green.
If the ST. indicator on the left earpiece does not light steadily,
adjust TUNING on the left earpiece until it turns on.
Adjust the headphones’ volume control.
Change the position of the transmitter.
Charge the headphones’ batteries.
Distorted audio
If the ST. indicator on the left earpiece does not light steadily,
rotate the FREQ. ADJUST control on the transmitter and
adjust TUNING on the left earpiece until it turns on.
Change the position of the transmitter.
Other receivers or transmitters that use 900 MHz frequencies
might be interfering with your headphones. Adjust the head-
phones’ operating frequency (see “Adjusting the Frequency”
on Page 8).
33-1144.fm Page 9 Tuesday, August 10, 1999 10:16 AM