Summary of CDP-100
Page 1
Instruction manual design and engineering cdp-100 cd player.
Page 2
This operation manual supplies all the information that you need to have about your tangent cdp-100. Please read this operation manual carefully before you start using the unit! 02.
Page 3
Contents contents safety precautions important safety instructions important information connection remote control front panel and connections contents 03 safety precautions 04 important safety instructions 05 important information 07 connection to the mains 08 installation of batteries 09 using the...
Page 4
To minimise the risk of fire or electrical shock, do not expose the unit to rain or moisture. Do not open the cabinet as it contains dangerous voltage. Only qualified technicians are allowed to carry out repair and service. If the plug of the power cord needs to be replaced, it is important that the...
Page 5
Warning: it is important that you read and observe both the instructions in this manual and the instructions on the unit. Keep this manual for future reference. This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit may cause electrica...
Page 6
Service do not attempt to carry out any service work yourself. By opening or removing the cabinet, you will be exposed to dangerous voltage or other hazards. Any service work should be carried out by qualified technicians. Spare parts if spare parts are required, make sure that the service technicia...
Page 7
Important information handling instructions - the top and back panel of the unit may become warm after prolonged use. This is not due to a defect. - turn off the power when the unit is not used. Protect the power cord - follow the instructions below to prevent abnormal operation, electrical shock, f...
Page 8
Item no.: power rating 230-240 v ac~50hz model: cdp-100 max power consumption: 30w serial no.: ~ac input 230-240v 50hz stereo output connection connection to the mains do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly before...
Page 9
Remote control installation of batteries 1 remove the cover as illustrated. 2 position two batteries of the type aaa/r03/um4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom). 3 replace the cover. - do not mix new and old batteries and do ...
Page 10
Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the selected signal input source. Some buttons on the remote control may therefore not be available if the corresponding signal input source has not been selected. Remote control...
Page 11
Front panel and connections front panel 1. Mains switch: 2. Led indicator: 3. Rewind/forward: 4. Program: 5. Random: 6. Previous: 7. Next: 8. Play/pause: 9. Stop: 10. Open/close: used to interrupt the mains voltage. Lights green when the unit is turned on. Lights red when the unit is in standby mode...
Page 12
Front panel and connections connections 1. Stereo output: 2. Ac input: analogue stereo output. For connection to stereo amplifier or receiver with analogue input. For connection of mains voltage. Make sure that the plug has been correctly inserted, and that the voltage corresponds to the text printe...
Page 13
Item no.: power rating 230-240 v ac~50hz model: cdp-100 max power consumption: 30w serial no.: ~ac input 230-240v 50hz stereo output connection audio connection layout analog amplifier/receiver this page only contains suggestions for connection of your tangent cdp-100. Note that the accessories in t...
Page 14
Power cd 20-008-04:2 operation and functions protect the environment and turn off the unit after use. On, off and standby load a disc if you want to play a disc, you must load it. You do that by pressing the eject button on the remote control or on the front panel of the cd player. When the disc has...
Page 15
Operation and functions pause press the play/pause button once more to stop playback. The counter on the left side of the display will start to blink. To continue playback, press the play/pause button again. The counter on the left side of the display will stop blinking and playback will continue. S...
Page 16
Operation and functions forward and rewind it is possible to perform a search in the track played. If you wish to search forward, depress the >> (forward) button on the remote until you get to that part of the track that you wish to hear, and then press play. You will see that the time counter in th...
Page 17
Operation and functions program repeat the cdp-100 can be programmed to play the tracks of a cd in a certain order. Press the program button when playback has been stopped. The display will show the message “program--00--000” the number to the left is the total numbers of tracks programmed. The numb...
Page 18
Troubleshooting troubleshooting problem cause/remedy 18 no power when unit is turned on. No sound. The unit will not read the disc. The unit skips some parts during playback. A buzzing can be heard. - switch on the electric current at the socket. - check that the plug has been correctly inserted int...
Page 19
Technical data technical data compatible disc types output voltage frequency characteristics signal/noise ratio cda, mp3 0.7v+/-2db (reference: 1khz 0db) 20 hz 0db -0.5 db +/- 1 db 100 1 > 90 db hz 0db 0 db +/- 1 db 0 khz 0db -0.5 db +/- 2 db 20 khz 0db -3.0 db +/- 2 db > 60 db (t h d + noise) see t...
Page 20
For further information please visit our website: www.Tangent-audio.Com item no. 40333 service hotline +45 9641 1599.