Summary of CDP-200
Page 1
Instruction manual design and engineering cdp-200 cd player.
Page 2
This operation manual supplies all the information that you need to have about your tangent cdp-200. Please read this operation manual carefully before you start using the unit! 02 the objective of every tangent product is that fundamentally correct design can produce a product capable of achieving ...
Page 3
Contents contents safety precautions important safety instructions important information connection remote control front panel and connections contents 03 safety precautions 04 important safety instructions 05 important information 07 connection to the mains 08 installation of batteries 09 using the...
Page 4
To minimise the risk of fire or electrical shock, do not expose the unit to rain or moisture. Do not open the cabinet as it contains dangerous voltage. Only qualified technicians are allowed to carry out repair and service. If the plug of the power cord needs to be replaced, it is important that the...
Page 5
Warning: it is important that you read and observe both the instructions in this manual and the instructions on the unit. Keep this manual for future reference. This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit may cause electrica...
Page 6
Service do not attempt to carry out any service work yourself. By opening or removing the cabinet, you will be exposed to dangerous voltage or other hazards. Any service work should be carried out by qualified technicians. Spare parts if spare parts are required, make sure that the service technicia...
Page 7
Important information handling instructions - the top and back panel of the unit may become warm after prolonged use. This is not due to a defect. - turn off the power when the unit is not used. Protect the power cord - follow the instructions below to prevent abnormal operation, electrical shock, f...
Page 8
Connection connection to the mains 08 model: cdp-200 power rating: ac 220v - 240v~50hz max power consumption:10w stereo output l r on power off ac 220v - 240v~50hz optical do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly be...
Page 9
Remote control installation of batteries 1 remove the cover as illustrated. 2 position two batteries of the type aaa/r03/um4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom). 3 replace the cover. - do not mix new and old batteries and do ...
Page 10
Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the selected signal input source. Some buttons on the remote control may therefore not be available if the corresponding signal input source has not been selected. Remote control...
Page 11
Front panel and connections front panel 1. Standby/on: 2. Led indicator: 3. Prev/next: 4. Repeat: 5. Random: 6. Rewind: 8. Play/pause: 9. Stop: 10. Open/close: used to set the unit into standby, and turning it back on. Lights green when the unit is turned on. Lights red when the unit is in standby. ...
Page 12
Front panel and connections connections 1. Optical output: 2. Stereo output: 3. Ac input: 4. Main power switch: for connecting to an amplifier or receiver digitally. Analogue stereo output. For connection to stereo amplifier or receiver with analogue input. For connection of mains voltage. Make sure...
Page 13
Connection audio connection layout this page only contains suggestions for connection of your tangent cdp-200. Note that the accessories in the pictures on this page are not included in the supply. 13 model: cdp-200 power rating: ac 220v - 240v~50hz max power consumption:10w stereo output l r on pow...
Page 14
Operation and functions protect the environment and turn off the unit after use. On, off and standby load a disc if you want to play a disc, you must load it. You do that by pressing the eject button on the remote control or on the front panel of the cd player. When the disc has been read, the displ...
Page 15
Operation and functions pause press the play/pause button once more to stop playback. The counter on the left side of the display will start to blink. To continue playback, press the play/pause button again. The counter on the left side of the display will stop blinking and playback will continue. S...
Page 16
Operation and functions forward and rewind it is possible to perform a search in the track played. If you wish to search forward, press and hold the >>i (next) button on the remote until you get to that part of the track that you wish to hear, and then let go of the button again. You will see that t...
Page 17
Operation and functions program repeat the cdp-200 can be programmed to play the tracks of a cd in a certain order. Press the memory button when playback has been stopped. The display will show the message “mem01 = 01” the number to the left is the total numbers of tracks programmed. The number to t...
Page 18
Troubleshooting troubleshooting problem cause/remedy 18 no power when unit is turned on. No sound. The unit will not read the disc. The unit skips some parts during playback. A buzzing can be heard. - switch on the electric current at the socket. - check that the plug has been correctly inserted int...
Page 19
Technical data technical data compatible disc types output voltage frequency characteristics signal/noise ratio cda 2.0v +/-0.2v (reference: 1khz 0db) 20 hz 0db -0.5 db +/- 1 db 100 1 > 90 db hz 0db 0 db +/- 1 db 0 khz 0db -0.5 db +/- 2 db 20 khz 0db -3.0 db +/- 2 db > 60 db (t h d + noise) see the ...
Page 20
For further information please visit our website: www.Tangent-audio.Com item no. 40554 service hotline +45 9641 1599.