Summary of EXEO AMP
Page 1
Exeo amp.
Page 2
Contents safety information 1 important safety instructions 2 accessories 4 connections 5 remote control information 7 front panel information 9 rear panel information 10 operation and functions 11 troubleshooting guide 13 specifications 14.
Page 3
1 safety information caution: - to reduce the risk of electric shock, do not remove cover (or back) - no user-serviceable parts inside. - refer servicing to qualified service personnel. This lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the pr...
Page 4
2 important safety instructions caution: read this before operating your unit. 1. Read and follow instructions: all the safety and operation instructions should be read before the product is operated. Follow all operation instructions within this manual. 2. Retain instructions: the safety and operat...
Page 5
3 important safety instructions 12. Conditions requiring service: unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A) if the unit exhibits sudden unusual operation or unusual display characteristics. B) if liquid has been spi...
Page 6
4 accessories you should find the following accessories included: 1. Mains cord 2. Rca cord 3. Remote control + batteries aaa x 2 4. Operator’s manual. 1 2 3 4.
Page 7
5 connections connection precautions when connecting, either disconnect the power plug from the power outlet or turn off the unit’s power using the power switch (if any). Check the left and right channels and connect properly (left to l and right to r). Insert the plugs securely. Improper connection...
Page 8
6 connections phono connect the turntable’s output cord l (white) plug to the l phono terminal and the r (red) plug to the r phono terminal. If your turntable is equipped with a grounding cable, connect it to the unit’s gnd terminal. But disconnect it if you notice increased humming. Audi o aux1 ter...
Page 9
7 remote control information by using the provided remote control unit, the receiver can be controlled from your listening position. To use the remote control unit, point it at the remote sensor window of the receiver. Notes: - even if the remote control unit is operated within the effective range, ...
Page 10
8 remote control information 1 2 3 4 5 6 7 9 8 11 10 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 17 1. System off press this key to turn off the exeo amp and any other exeo product. 2. Does not apply. 3. Autotune does not apply. 4. Info does not apply. 5. St/mono does not apply. 6. Memory does not ...
Page 11
9 front panel information 7 5 1 2 3 4 1. Standby/on press it to turn on the unit and press it again to turn it off. 2. Led indicator is off when the amplifier is turned on. It is red when the amplifier is in standby mode. 3. Input rotate this knob clockwise or counterclockwise to choose the input so...
Page 12
10 rear panel information 1 2 3 4 6 7 8 9 1. Phono: for connection of a turn table (note: additional ground terminal available above inputs) 2. Cdp: for connection of a cd player e.G. Exeo cdp 3. Net: for connection of a net tuner e.G. Exeo net 4. Dab: for connection of e.G. A dab tuner 5. Aux1 : fo...
Page 13
11 operation and function on, off and standby 1. Turn on the unit by pressing the standby/on button on the front panel or the amp button on the remote control. 2. If you wish to turn off the unit to avoid any power consumption, you must remove the power cord. Selecting an input source you can choose...
Page 14
12 operation and function hp filter a highpass filter can be set on and off, to match the system with a active subwoofer. The corner frequency is 80hz and it has a 12db slope. Phono the phono input can be set for mm and mc cartridges, the gain is 40 and 60db respectively. Factory reset the function ...
Page 15
13 troubleshooting problem cause/remedy no power when the unit is turn on - switch on the current at the mains outlet socket - check that the plug has been correctly inserted in the socket - the internal fuse has blown and must be replaced by a qualified service technician - the power cord has been ...
Page 16
14 specifications parameter value note power standby power consumption 0.73wrms power supply rating 300wrms audio - connectors line level inputs connectors rca (phono), gold plated case = gnd, tip = signal (cdp, net, dab, aux1) 3.5mm line level inputs connector 3.5mm mini-jack, tin-plated case = gnd...