Tangent Wave CP300 User Manual - page 16
Wave - CP300 - Control Panel - Users Manual v1.4 rev 3
15
17.
Connecting the Wave to Speedgrade / Framecycler (Iridas)
17.1 Overview
The Tangent CP300 "Wave" is supported with all IRIDAS FrameCycler and
SpeedGrade 2009 products. Depending on the feature set of the application the CP300
can be used for playback control, applying looks, color grading.
17.2 Setup
Connect Wave computer as descibed in this manual.
Open your FrameCycler or SpeedGrade application, it will automatically detect that the
CP300 is present. You don't need to make any further adjustments, the device is ready
to use.
17.3 Changing the sensitivity of trackballs, wheels and knobs
To adjust the sensitivity simply open the settings of FrameCycler or SpeedGrade, then
check for "Tangent". This area applies to both the CP200 and the CP300 series. You
can leave all fields for IP address space and unit IDs blank when using the CP300.
Scroll to the end of the page. Use the sliders to adjust the sensitivity.