Tango x3s multifunctional vacuum cleaner user manual model no.: tango x3s.
1 thank you for purchasing our new robotic vacuum cleaner. Please read this manual carefully before using the product..
2 table of contents safety tips ................................................................................ 4 components of the cleaner ..................................................... 5 function introduction ............................................................. 5 applicability ......
3 technical specifications of remote control .............................................................................................................. 21 technical specifications of docking station ....................................................................................................
4 safety tips warnings no one else can disassemble, maintain or transform the product except the maintenance technicians designated by the company, or it may cause fire, electric shock or personal injury. Don’t use other charger but the equipped one of the robot, or it may cause product damage, elec...
5 components of the cleaner cleaner remote control auto charging docking station adaptor user manual virtual wall mopping part mop dust brush side bruch filter function introduction it is the robotic vacuum cleaner with rechargeable battery, controlled by microcomputer intelligent and integrated wit...
6 main body top of main body bottom of main body control panel of the main body display interface lcd directive sign menu display: 1. Date/week set display 2. Wheel rotation/speed display 3. Uv lamp display 4. Automatic cleaning display 5. Timing cleaning display 6. Current week display 7. Breakdown...
7 usage of control panel 1. Check the batteries are installed correctly with enough power, and then turn on the power switch, the buzzer will ring once and icons will show as follows: 2. Indicates the current date per week. 3. Indicates malfunction, “88:88” displays the failure code from e001 to 034...
8 assembly & disassembly and cleaning of dustbin assembly & disassembly of dustbin: 1. Extract the dustbin by pressing the key on it. (refer to figure 1 and figure 2. Press the red button on it, and then the blower will pop up automatically. (refer to figure 3) 3. Reverse the blower, release 2 faste...
9 cleaning of dustbin and blower: 1. First dump the dust, and then clean it with dust brush. (refer to figure 1) 2. Pop up the blower, and then clean the air inlet/outlet with brush cleaner. (refer to figure 2 and figure 3) 3. Don’t clean the blower in water! 4. Pop up the blower, take out the filte...
10 in assembly. Assembly & disassembly of side brush: 1. Release the screw in the main shaft of the side brush before changing the side brush. 2. Press the side brush against the main shaft and then fasten the screw. (refer to the figure) cleaning of brush and floor brush: 1. Clear the hair or big d...
11 assembly & disassembly and cleaning of front wheel: 1. Pull out the front wheel with your finger and tools and then clean it. (refer to the figure) 2. Insert and press the front wheel into the right position while assembling. Cleaning of sensor and infrared transparent window 1. Clean the sensor ...
12 3. The right place of battery. (refer to figure 3) 4. Please take out the battery if it was unused for remote control overall appearance key description 1. Automatic cleaning key/thursday 2. Spot cleaning key/friday 3. Time set key/tuesday 4. Reservation key/monday 5. Uv sterilizing key/wednesday...
13 function guide function information automatic cleaning press the key, the cleaner will clean in the automatic mode as per the pre-set speed. Press the key again, the cleaner will stop running. The function cannot be memorized. Spot cleaning press the key, the cleaner will clean in the timing mode...
14 4 . press the key for more than 5s, you can delete all set and memory and return to the initial state before the robot leaves the factory. Ok key 1 . you should press “ok” to save the set and exit reservation date set after finishing the reservation date setting. 2 . you should press “ok” to save...
15 1 led decorative light turn on the decorative light to activate the atmosphere, and place in the glowing center of the light a little essence, which will give off charming aroma after heating. 2 decorative light switch press the switch to turn on/off while the decorative light is on. 3 power led ...
16 4. Press docking in the remote control if you want to charge for the main body, the cleaner will search the docking station for charging within available scope automatically. 5. Press any key in host panel or power off and docking keys in the remote control while the cleaner is searching for the ...
17 (refer to figure 5) figure 5 automatic charging: the cleaner will search the docking station for charging automatically in case of low battery during cleaning. : 1. The cleaner may fail to find the docking station due to the obstacle, decreased battery and complex condition, so the docking statio...
18 3 near-infrared transmitting head the near-infrared transmitting signal makes the cleaner run outside the virtual wall scope of 50-100cm without any impact to it. 4 power led the power led will flicker once every 8s until the low battery after you slide to low, middle and high, and the cleaner wo...
19 storage the robot should be stored in dry place with good ventilation. Trouble shooting the cleaner doesn’t work or clean poorly 1. Check whether turning on the switch. 2. Check whether the dust box, filter and intake are clean, and whether the side brush works. 3. Check whether the battery volta...
20 e004 right ground detection the sensing head was blocked or the cleaner was jammed on the step. E005 left collision the left of front housing was jammed and cannot return. E006 right collision the right of front housing was jammed and cannot return. E007 left wall detection the cleaner was jammed...
21 technical specifications model kl-xxx 1 rated voltage 14.4v 2 battery rechargeable battery (the charge time is about 3-4h) 3 working hours about 60 ~ 90min 4 rated power 5 operating temperature range -10 ~ 45 6 operating humidity range ≤ 85rh 7 input voltage/current 24v 1a 8 wireless remote ism f...
22 technical specifications of virtual wall no. Models parameters remark 1 specification l × w × h: 102 × 71 × 106mm 2 weight 0.14kg 3 rated voltage 3v 4 operating temperature range -10 ~ 45 5 operating humidity range ≤ 85rh.