Model: bc-601fs manual instruction manual read this instruction manual carefully and keep it for future reference. Mode d’emploi a lire attentivement et à garder en cas de besoin. Manual de instrucciones lea detenidamente este manual de instrucciones y guárdelo para futura referencia..
Table of contents introduction .................................................1 features and functions .................................2 preparations before use ...............................3 getting accurate readings ............................3 automatic shut-down function .....................
1 en thank you for selecting a tanita body composition monitor. This monitor is one in a wide range of home healthcare products produced by tanita. This instruction manual will guide you through the setup procedures and outline the button features. Additional information on healthy living can be fou...
2 en features and functions measuring platform aa-size batteries visceral fat button arrow buttons past button set/result button segment button display screen electrodes personal keys weight-only key hand-electrodes memory card *sd logo is a trademark. Memory card slot.
3 en to ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not undress, always remove your socks or stockings, and be sure the soles of your feet are clean before stepping onto the measuring platform. Be sure your heels are correctly al...
4 en initial setting after batteries are installed press to turn on the unit and set the date and time. Use the / buttons to scroll through numbers. Press set to confirm. 1. Set year (applicable year: 2009 – 2050) setting (resetting) date and time 2. Set month 3. Set day 4. Set hour (24 hour format)...
5 en you will receive readings only if data has been programmed into one of the personal data memories or the guest mode. The monitor can store personal details for up to 4 people. Press set to turn on the unit. Use the / buttons to scroll through numbers. Press set to confirm. Note: • if you don’t ...
6 en 1. Select personal data number key and step on using your toe, tap your pre-programmed personal key. The unit will beep and the display will show the programmed data. The unit will beep again and the display will show “0.0”. (you can change your height setting by pressing set while “0.0” is sho...
7 en 2. Obtain your readings after the measurement, the unit will display all the readings. Step off the scale and press to see a desired reading. Note: • the unit will automatically shut off after 40 seconds of displaying result with inactivity. • if your age reaches 100 years old or more, only the...
8 en press to show the segmental body fat %, and press again to show each segmental reading. Press to show the muscle mass reading while the segmental body fat % is displayed, and press again to show each segmental reading. Press again while the segmental reading is displayed, except total body fat ...
9 en using enables you to see your visceral fat rating whenever your readings are displayed. After the measurement, step off the platform and press while your readings are displayed. Using the visceral fat button this feature indicates the rating of visceral fat in your body. Visceral fat is the fat...
10 en recall function can be used to obtain the following desired results in sequence by pressing / ; • last reading • the average of the results from 1 week ago • the average of the results from 2 weeks ago • the average of the results from 1 month ago • the average of the results from 2 months ago...
11 en guest mode allows you to program the unit for a one-time use without resetting a personal key. Press “guest/ ”, the unit will beep and the display will show “0.0” indicating it is ready to measure. Now pull out the hand-electrodes, hold with arms straight down and step onto the platform. After...
12 en if the following problems occur ...Then... • appears on the display, or all the data appears and immediately disappears. Batteries are low. When this message appears, be sure to replace the batteries immediately, since weak batteries will affect the accuracy of your measurements. Change all th...
