Tanita DC-360 Instruction Manual - Before Use
Before Use
13
13
Settings
1
2
Press the
key to change the mode.
The setting screen is displayed.
Select the setting item from the list below.
Enter numerical values and Press the
key.
Setting item List
→Save changes and return
→Correct input number or cancel
0
Check the software version
1
Date and time
* Date and time → *See
Note
below
2
Number to be printed automatically
(0-3 sheet(s)) (Default: 1)
4
Cutting automatically
(0: off 1: on) (Default: 1)
5
Beep sound
(0: off 1: on) (Default: 1)
7
ID number (Automatic count up)
(0: off 1: on) (Default: 0)
8
Measurement fl ow
(0: off Two step fl ow / Measure body weight fi rst
1: on One step fl ow / Enter personal info fi rst)
(Default: 0)
*
Measurement
fl ow → See P.15
9
Body type selection (Athletic mode)
(0: off 1: on) (Default: 1)
*
Athletic
mode
→ See P.15&P.30
10
Height input unit
(0: off 0.1cm increments
1: on 1cm increments) (Default: 0)
11
Automatic determination time of input information
(0-9 second(s)) (Default: 0)
* 0: Disables this function
18
Target body fat ratio input
(0: off 1: on) (Default: 0)
19
Printout language
(1: English, 2: French, 3: German, 4: Spanish,
5: Italy, 6: Turkey) (Default: 1)
20
Printout contents
(1: full 2: short) (Default: 1)
21
Timeout function of result display
(0: disable 1: enable) (Default: 0)
23
BMR kJ unit displayON/OFF
(0: off 1: on) (Default: 1)
45–67 Printing item settings
(0: off 1: on) → See P.26
80
SD Card mode
(0: off 1: on) → See P.29
• The
key cannot be used when the scale is measuring weight or results are displayed
while standing on the platform after measurment.
Enter the year, month, day, hour and minute.
The date format is “yyyy mm dd hh:mm”
(Date input range: 2015 01 01 00:00 to 2099 12 31 23:59)
To enter a number with 1 digit (0 to 9), press “0” fi rst.
3:45 pm, 10th April, 2015
“2015” “04 10” “15:45”
Example
Note
Note