Tanita FitScan BC-1100F Instruction Manual - Recall Function

4

Recall Function

The previous readings of the following features can be obtained using the recall function.

 • Weight  

 • Body Fat %  • Total Body Water %   • Muscle Mass

To obtain previous readings, press the SET button while the current readings are being displayed.

The display will show the previous readings. To see other previous readings, press s

/

t

 buttons for each desired reading.

Press SET again to go back to the current result display.

Note: For children (age. 7-17), the unit will only display the previous Weight and the Body Fat %.

Programming The Guest Mode

Guest mode allows you to program the unit for a one-time use without resetting a personal data number.

Press s button to activate the unit. Then follow the steps:  Set Age, Select Female or Male, and Specify Height.

Taking Weight Measurement Only

Press the Weight-only key.

Step onto the platform while the Green Indicator Light is blinking.

After the measurement is complete, the platform will beep twice, readings will automatically show on the remote display.

Carefully step off platform after measurement is complete.

Switching The Weight Unit Mode (kg / lb)

Select your preferred weight unit mode using the weight mode switch on the bottom of the remote display.

Troubleshooting

•  Interference may occur if multiple platforms are present. Please use only one platform in any given area.

• Do not step onto the platform before the platform beeps once and the Green Indicator Light blinks.

• Do not step off until after hearing a double beep or the Green Light remains solid (stops blinking), the measurement is taken, and 

the readings are displayed on the applicable device (e.g. Tanita Remote Display, and/or PC).

• If you do not step onto the platform within 30 seconds after Green Indicator Light begins blinking, the power will shut-off 

automatically.

•  Constant Red Indicator Light

Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned on the measuring platform. 

(see p.1)

Make sure to step onto the platform only after it has beeped twice or the Green Indicator Light is blinking.

The unit cannot accurately measure your weight if it detects movement. Please stand on the platform keeping movement to a 

minimum.

If Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.

Reading cannot be obtained if the weight capacity is exceeded. Weight capacity is 440lb (200kg).

•  Blinking Red Indicator Light

Batteries are low. When the Red Indicator Light is blinking, replace the batteries immediately, since weak batteries will affect the 

accuracy of your measurements. Change all the batteries at the same time with new batteries.

 Warning

Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.  

The body fat monitor function is not intended for pregnant women, professional athlete or bodybuilders.