Tanita RD-953 Instruction Manual - Programming The Guest Mode
Follow these instructions if the monitor continues to mis-recognize your number.
14
Note:
・
When the monitor is connected to the smartphone and measurement data is saved in the monitor,
lights in the personal data display screen and the measurement result display screen.
・
If there are more than 6 sets of data stored, the number of saved sets of data is displayed after the personal data display lights.
・
Up to 10 sets of measurement data can be stored in the monitor.
・
If you step onto the monitor before 0.00kg (0.0lb, 0.0stlb) is displayed, "Err,-OL" is displayed and the power turns off during
measurement.
Specifying the Personal Data Number for Measurement
1.
When the power is off, press the
button to start measuring.
Select your personal number using the
buttons and then press the
button.
Step onto the monitor when “0.00kg” (0.0lb, 0.0stlb) appears in the display.
The monitor turns off automatically after displaying the measurement results.
2.
en
Guest mode allows you to program the monitor for one-time use without using a personal data number.
Note:
The age range is from 5 to 99.
Who should use Athlete Mode?
Adults aged 18 years and over who either:
・
Train or exercise for 12 hours or more a week and have been doing so for at least six months.
・
Are body builders.
・
Are professional athletes who want to monitor their progress at home.
・
Have a lifetime history of fitness and who used to do more than 12 hours a week but do less now.
・
Do not step off until " " disappears.
Press the
button to select "GUEST", then press the
button.
Next, follow the steps below:
Set the age, gender (male/ female/ male athlete/ female athlete) and height.
Step onto the monitor after “0.00kg” (0.0lb, 0.0stlb) is displayed.
The readings are displayed for 40 seconds.
15
Programming the Guest Mode
Press the
button. After 2 or 3 seconds, “0.00kg”(0.0lb, 0.0stlb) is displayed.
When "0.00kg" (0.0lb, 0.0stlb) is displayed, step onto the monitor.
The body weight measurement is displayed, and the monitor power turns
off automatically after approximately 20 seconds.
Measuring Weight Only
en