E n g electronic physician scale wb-3000 plus instruction manual please keep this manual in a safe place, and make sure it is readily available whenever necessary. Please use this product only after carefully reading this manual and fully understanding its contents..
Warning • inserting and removing the ac adapter to reduce the risk of electric shock or product damage, never insert or remove the ac adapter with wet hands. • do not under any circumstances dismantle or alter the device, as this could result in electric shock or injury as well as adversely affectin...
4. Part names & accessories e n g 3 3. Based on nih/who bmi guidelines under weight normal range pre obese obese obese obese class l class ll class lll bmi ⬍ 18.5 18.5 ⬉ bmi ⬍ 25 25 ⬉ bm ⬍ 30 30 ⬉ bmi ⬍ 35 35 ⬉ bmi ⬍ 40 bmi ⭌ 40 battery compartment platform height rod arm adjustable feet ac adapter ...
E n g 4 5. Assembly instructions 1. List of components base (fully assembled and pre-wired to display assembly) cable (base side) lower pillar assembly screw cable (top head display assembly side) top head display assembly (fully assembled and pre-wired to base) back cover front cover top height rod...
E n g 5 1-1) 1-2) * insert new batteries such that the negative terminals of the batteries are pushed up against the coils within the battery housing. Image 6. Set up use the scale in a firm, flat and stable location. To obtain the highest level of accuracy, please make sure that all four (4) feet a...
E n g 6 (or ) d d d d d d 2. Bmi weighing 1) turn on the power by pressing the key. 2) after all the segments flash, [0.0lb/0.0kg] is displayed. 3) the person to be weighed should still in the middle of the platform. 4) the weight will be locked-in and displayed on the display. “ (hold)” sign will a...
E n g 7 3. Step on function the scale will turn on automatically when the user steps onto the platform. Note: • if the weight is less than 22lb/10kg, the “step-on” function will not work. • if person less than 22lb/10kg, press the key manually to turn on the scale. • if an item is placed on the scal...
E n g 8 10. Measuring height procedure the user should step on the platform without wearing shoes for accurate measurement. Always have someone assist the user for accurate measurement. 1) adjust the height rod arm position before the user steps on the platform. Place hand on the height rod arm. If ...
E n g 9 11. Output data format this section covers the exporting of data from the scale to an external device (e.G. Pc) using a rs-232c and usb compliant signal. • rs-232c and usb interface are for data output only! • this scale is not capable of receiving instructions from an external device. Note:...
E n g 10 height hm hf xx.X xxx.X xx { 0 ˜0 ˜1 output data name of item header weight bmi checksum output data (ascii code) pattern bmi mode 2 – 6 bytes 3 – 5 bytes control data control data control data model control data fix to 16 fix to 1 fix to 1 fix to 1 2 bytes fixed 1 byte fixed 1 byte fixed 1...
E n g 11 12. Specifications 13. Troubleshooting model wb-3000 plus strain gauge load cell 660lb / 0.2lb 0 - 660lb 0 - 300kg 22 - 660lb 10 - 300kg mechanical height rod 2ft 1in – 7ft 2ft – 8ft 2in 0.5in increment 660lb / 0.2lb 2ft – 8ft 2in 0.5in increment 0.1 increments 20.8 x 15.0 x 54.4 in 15.0 x ...
© 2008-2013 tanita corporation. All rights reserved. E n g aug.2013 wb3007651(0)-1306ca usa and canada federal communications commission and canadian ices notice this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules and ...
