110 series subwoofers 110tb (tile bridge) 110sr (sheet rock) o w n e r ’ s m a n u a l 110 series subwoofer.
C o n t e n t s table of contents warranty / damage claim 110 seroes subwoofers & input modules cabinet options input module options passive lo pass filter passive 70 volt input module options passive 70 volt with lo pass filter active o w n e r ’ s m a n u a l 1 2 5 active 110 input module controls...
Warranty / damage claims congratulations on the purchase of your tannoy 110 series subwoofer. No regular maintenance of the subwoofer is necessary. All tannoy professional loudspeaker products are covered by a 5 year warranty for loudspeaker components and one year for electronic component from the ...
110 series subwoofers and input modules this manual is intended for the owner, operator or installer of tannoy 110 series subwoofers. It is a guide for installing, setting up and operating the 110 series in accordance with established codes and practices available at the time of publication. It does...
Input module options passive (standard) the basic connection panel supplied with any of the 110 series subwoofers is a 6 ohm speaker level input via barrier strip. It is highly recommended that the audio signal be lo pass filtered via an outboard active crossover. This input module is ideal for syst...
Input module options passive 70 volt with lo pass filter passive 110 input module spkr level input 70v 150w made in canada output crossover lo pass filter lo-pass 100hz active (active subwoofer with 2-channel feed-through) a dedicated power amplifier that really brings your 110 series subwoofer to l...
Active 110 input module controls active module with output for 2 speakers 1 2 3 4 5 6 7 8 9 active input module controls 1) input - two channel (stereo) balanced line level input. Connect via xlr male plugs from your signal source.Use high quality 2 conductor shielded audio cable ( belden 8451) for ...
Mechanical installation 110tb new / existing construction installation procedures: before you begin: please read and understand all of these instructions thoroughly before beginning any work. Note that construction work for the installation of all tannoy products must be done to local building codes...
Mechanical installation 110tb 2’ x 2’ tile grid installation procedures: 1) the 110tb was designed for quick and simple installation directly into a 2’ x 2’ t-bar ceiling grid (figs. 9 & 10). 2) remove several tiles around the installation location to gain easier access for placing the subwoofer in ...
Mechanical installation 110tb fig. 8: wire rope detailing suspension or seismic tether. Fig. 9: installed subwoofer top view, only two chains attached. Fig. 10: completed subwoofer installation. Fig. 11: installing the hanger bolt. Fig. 12: installed hanger bolt. Fig. 13: suspension points with turn...
Mechanical installation 110sr new / existing construction installation procedures: before you begin: please read and understand all of these instructions thoroughly before beginning any work. Note that construction work for the installation of all tannoy products must be done to local building codes...
Mechanical installation 110sr new / existing construction installation procedures: 6) leave some excess wire hanging through the opening in the pre-installation ring so the drywall contractors can cut a hole and drop the wires through. You may also want to consult with them on cutting the opening fo...
Mechanical installation 110sr fig. 4: pre-installation ring on steel furring channel prior to drywall being placed. Fig. 5: cutting drywall using the rotozip™. Fig. 6: completed install showing the reveal of the pre-installation ring relative to the ceiling board. Fig. 7: installing the subwoofer us...
Dimensions 110tb shipping weight with active module: 40 lbs. .................................. .................................. .................................. .................................. .................................. .................................. ................................
Technical specifications active module frequency response: power rating: maximum spl (2) 2 1 meter: driver complement: lf cutoff (-3 db): inputs: outputs: protection limiter: input level: lo pass filter: all pass: high pass filter: high pass output: high pass output bandwidth amplifier type: ac powe...
Tannoy united kingdom t: +44 (0) 1236 420199 e: enquiries@tannoy.Com tannoy north america t: 00 1 (519) 745 1158 e: inquiries@tannoyna.Com tannoy deutschland t: 00 49 (0180) 1111 881 e: info@tannoy.Com tannoy france t: 00 33 (0) 1 7036 7473 e: ventes@tannoy.Com 03.26.07 r3.0
