1. DL manuals
  2. Tannoy
  3. Speakers
  4. CMS 3.0 series
  5. Operation Manual

Tannoy CMS 3.0 series Operation Manual - 4.3. Pre-Install Backcan

Other manuals for CMS 3.0 series: Quick Start Manual
Manual is about: in-ceiling

Summary of CMS 3.0 series

  • Page 1

    Operation manual cms 3.0 series in-ceiling loudspeakers.

  • Page 2

    2 cms 3.0 series operation manual rev 3.0.0

  • Page 3

    Table of contents cms 3.0 series operation manual rev 3.0.0 3 table of contents 1. Introduction 4 2. Unpacking 4 3. Safety notices 4 4. Product feature identification 5 4.1. Blind mount .....................................................................................................................

  • Page 4

    1. Introduction 4 cms 3.0 series operation manual rev 3.0.0 1. Introduction thank you for purchasing this tannoy ceiling monitor system product. Designed for both speech and music program material, the tannoy cms range provides exceptional sonic quality and long-term reliability in all ceiling- moun...

  • Page 5: 4.1. Blind Mount

    4. Product feature identification cms 3.0 series operation manual rev 3.0.0 5 4. Product feature identification important note: drawings for each loudspeaker below are generic and apply to the loudspeaker types specified. Some variations will be apparent in some models, but differences are not criti...

  • Page 6: 4.3. Pre-Install Backcan

    4. Product feature identification 6 cms 3.0 series operation manual rev 3.0.0 4.3. Pre-install backcan optional pre-install (pi) backcan for pi models. Note: the cms 603dc/ict and cms 803dc models have the transformer pre-attached to the inside of the backcan. The cms 503dc/ict has the transformer p...

  • Page 7: Standard Accessories

    5. Accessories cms 3.0 series operation manual rev 3.0.0 7 5. Accessories standard accessories optional accessories c-ring grille paint mask cut-out template 60 w transformer note: for use with cms 803 pi in distributed lines without backcans. Tile-bridge kit note: a tile-bridge kit must always be u...

  • Page 8

    6. Installation 8 cms 3.0 series operation manual rev 3.0.0 6. Installation 6.1. Installation guide for suspended ceilings 1. Remove the ceiling tile from its frame and place it on a flat surface. Position the cutout template (self adhesive backed) on the tile. (fig.1) 2. Cut out the hole in the cei...

  • Page 9

    6. Installation cms 3.0 series operation manual rev 3.0.0 9 6.2. Installation guide for sheetrock ceilings 1. Position the cutout template (self adhesive backed) on the ceiling. (fig.1) 2. Cut out the hole in the ceiling using a pad saw following the broken line indicated on the template then slide ...

  • Page 10

    6. Installation 10 cms 3.0 series operation manual rev 3.0.0 6. Installation 6.3. Installation guide for optional plaster ring 1. Nail or screw the plaster ring to the joists. (fig.1) 2. Lay the speaker wiring to where the speaker will be fitted and complete the plastering work on the ceiling. (fig....

  • Page 11

    6. Installation cms 3.0 series operation manual rev 3.0.0 11 6.4. Installation guide for optional pre-installation backcan (pi models only) 1. Attach the backcan to a safe and secure fixing point. This can be done in a number of ways: method 1: fix the backcan to a secure fixing point by using suita...

  • Page 12

    6. Installation 12 cms 3.0 series operation manual rev 3.0.0 6. Installation 6.4. Installation guide for optional pre-installation backcan (pi models only) 2. Attach the conduit to the installed backcan. This can be done in two ways: method 1: you can use the clamp at the back of the pre-install bac...

  • Page 13

    6. Installation cms 3.0 series operation manual rev 3.0.0 13 6.4. Installation guide for optional pre-installation backcan (pi models only) 5. Go to section 7 for instructions on wiring and setting up then return to point 6 below. 6. Slide the speaker assembly through the hole. Turn the screws (deno...

  • Page 14

    7. Wiring and setting up 14 cms 3.0 series operation manual rev 3.0.0 7. Wiring and setting up 1. Open the wiring cover (if applicable) and locate the euro-type connector plug and socket at the back of the speaker. (fig.1) 2. For connection to an amplifier, use pins 1 and 2 (fig.2): • pin 1 is posit...

  • Page 15: Cms 403Dce

    8. Cms series model dimensions cms 3.0 series operation manual rev 3.0.0 15 8. Cms series model dimensions cms 403dce hole cut-out size: 187 mm Ø205.0 [8.07"] 34.2 [1.35"] 147.6 [5.81"] Ø181.1 [7.13"] cms 403icte hole cut-out size: 187 mm Ø205.0 34.2 [1.35"] 147.6 [5.81"] Ø181.1 [7.13"].

  • Page 16: Cms 503Dc Bm

    8. Cms series model dimensions 16 cms 3.0 series operation manual rev 3.0.0 8. Cms series model dimensions cms 503dc bm hole cut-out size: 190 mm 205.9 [8.11"] 181.3 [7.14"] 205.3 [8.08"] 188.0 [7.40"] 4.5 [0.18"] cms 503ict bm hole cut-out size: 190 mm 205.9 [8.11"] 181.3 [7.14"] 205.8 [8.10"] 188....

  • Page 17: Cms 503Dc Lp

    8. Cms series model dimensions cms 3.0 series operation manual rev 3.0.0 17 8. Cms series model dimensions cms 503dc lp hole cut-out size: 253 mm 274.0 [10.79"] 98.6 [3.88"] 4.2 [0.17"] 244.3 [9.62"] cms 503ict lp hole cut-out size: 253 mm 274.0 [10.79"] 98.6 [3.88"] 4.2 [0.17"] 244.3 [9.62"].

  • Page 18: Cms 503Dc Pi

    8. Cms series model dimensions 18 cms 3.0 series operation manual rev 3.0.0 8. Cms series model dimensions cms 503dc pi hole cut-out size: 190 mm 205.9 [8.11"] 133.3 [5.25"] 4.2 [0.17"] cms 503ict pi hole cut-out size: 190 mm 205.9 [8.11"] 131.7 [5.19"] 4.2 [0.17"] 181.3 [7.14"].

  • Page 19: Cms 503Dc Pi Backcan

    8. Cms series model dimensions cms 3.0 series operation manual rev 3.0.0 19 8. Cms series model dimensions cms 503dc pi backcan hole cut-out size: 190 mm Ø288.0 [11.34"] Ø256.0 [10.08"] 8.8 [0.35"] 136.2 [5.36"] 153.5 [6.04"] Ø186.4 [7.34"] cms 503ict pi backcan hole cut-out size: 190 mm Ø288.0 [11....

  • Page 20: Cms 603Dc Bm

    8. Cms series model dimensions 20 cms 3.0 series operation manual rev 3.0.0 8. Cms series model dimensions cms 603dc bm hole cut-out size: 253 mm 273.3 [10.76"] 4.2 [0.17"] 255.8 [10.07"] 244.3 [9.62"] 274.0 [10.79"] cms 603ict bm hole cut-out size: 253 mm 273.8 [10.78"] 4.1 [0.16"] 256.5 [10.10"] 2...

  • Page 21: Cms 603Dc Pi

    8. Cms series model dimensions cms 3.0 series operation manual rev 3.0.0 21 8. Cms series model dimensions cms 603dc pi hole cut-out size: 253 mm 274.0 [10.79"] 4.1 [0.16"] 244.3 [9.62"] 100.0 [3.94"] cms 603ict pi hole cut-out size: 253 mm 100.0 [3.94"] 4.1 [0.16"] 244.3 [9.62"] 273.5 [10.77"].

  • Page 22: Cms 603Dc Pi Backcan

    8. Cms series model dimensions 22 cms 3.0 series operation manual rev 3.0.0 8. Cms series model dimensions cms 603dc pi backcan hole cut-out size: 253 mm Ø351.0 [13.82"] Ø249.4 [9.82"] 168.5 [6.63"] 8.8 [0.35"] 151.2 [5.95"] Ø319.0 [12.56"] cms 603ict pi backcan hole cut-out size: 253 mm Ø351.0 [13....

  • Page 23: Cms 603Ict Ls

    8. Cms series model dimensions cms 3.0 series operation manual rev 3.0.0 23 8. Cms series model dimensions cms 603ict ls hole cut-out size: 253 mm 273.8 [10.78"] 4.1 [0.16"] 256.5 [10.10"] 244.3 [9.62"] 274.0 [10.79"] cms 803dc bm hole cut-out size: 295 mm 319.0 [12.56"] 327.7 [12.90"] 5.2 [0.20"] 3...

  • Page 24: Cms 803Dc Pi

    8. Cms series model dimensions 24 cms 3.0 series operation manual rev 3.0.0 8. Cms series model dimensions cms 803dc pi hole cut-out size: 295 mm 319.0 [12.56"] 286.4 [11.27"] 125.6 [4.94"] 5.2 [0.20"] cms 803dc pi backcan hole cut-out size: 295 mm Ø397.0 [15.63"] Ø291.4 [11.47"] Ø365.0 [14.37"] 8.8...

  • Page 25: Cms 803Dcq

    8. Cms series model dimensions cms 3.0 series operation manual rev 3.0.0 25 8. Cms series model dimensions cms 803dcq hole cut-out size: 295 mm 319.0 [12.56"] 327.7 [12.90"] 5.2 [0.20"] 310.5 [12.22"] 286.4 [11.27"].

  • Page 26: Cms 403Dce Model

    9. Technical specifications 26 cms 3.0 series operation manual rev 3.0.0 9. Technical specifications cms 403dce model performance frequency response (-3 db) (1) bm backcan 110 hz - 50 khz frequency range (-10 db) (1) bm backcan 80 hz - 54 khz system sensitivity (1 w @ 1 m) (2) 88 db (1 w = 4 v for 1...

  • Page 27: Cms 403Icte Model

    9. Technical specifications cms 3.0 series operation manual rev 3.0.0 27 9. Technical specifications cms 403icte model performance frequency response (-3 db) (1) 110 hz - 22 khz frequency range (-10 db) (1) 80 hz - 24 khz system sensitivity (1 w @ 1 m) (2) 88 db (1 w = 4 v for 16 ohms) nominal cover...

  • Page 28: Cms 503Dc Models

    9. Technical specifications 28 cms 3.0 series operation manual rev 3.0.0 9. Technical specifications cms 503dc models performance frequency response (-3 db) (1) bm backcan 85 hz - 50 khz frequency range (-10 db) (1) bm backcan 74 hz - 54 khz frequency range (-10 db) (1) pi backcan 70 hz - 54 khz sys...

  • Page 29: Cms 503Dc Lp Model

    9. Technical specifications cms 3.0 series operation manual rev 3.0.0 29 9. Technical specifications cms 503dc lp model performance frequency response (-3 db) (1) 88 hz - 22 khz frequency range (-10 db) (1) 77 hz - 24 khz system sensitivity (1 w @ 1 m) (2) 89 db (1 w = 4 v for 16 ohms) nominal cover...

  • Page 30: Cms 503Ict Models

    9. Technical specifications 30 cms 3.0 series operation manual rev 3.0.0 9. Technical specifications cms 503ict models performance frequency response (-3 db) (1) bm backcan 85 hz - 22 khz frequency range (-10 db) (1) bm backcan 74 hz - 24 khz frequency range (-10 db) (1) pi backcan 71 hz - 24 khz sy...

  • Page 31: Cms 503Ict Lp Model

    9. Technical specifications cms 3.0 series operation manual rev 3.0.0 31 9. Technical specifications cms 503ict lp model performance frequency response (-3 db) (1) 88 hz - 50 khz frequency range (-10 db) (1) 77 hz - 54 khz system sensitivity (1 w @ 1 m) (2) 89 db (1 w = 4 v for 16 ohms) nominal cove...

  • Page 32: Cms 603Dc Models

    9. Technical specifications 32 cms 3.0 series operation manual rev 3.0.0 9. Technical specifications cms 603dc models performance frequency response (-3 db) (1) bm backcan 75 hz - 30 khz frequency range (-10 db) (1) bm backcan 50 hz - 30 khz frequency range (-10 db) (1) pi backcan 46 hz - 30 khz sys...

  • Page 33: Cms 603Ict Models

    9. Technical specifications cms 3.0 series operation manual rev 3.0.0 33 9. Technical specifications cms 603ict models performance frequency response (-3 db) (1) bm backcan 78 hz - 22 khz frequency range (-10 db) (1) bm backcan 51 hz - 24 khz frequency range (-10 db) (1) pi backcan 46 hz - 24 khz sy...

  • Page 34: Cms 803Dc Models

    9. Technical specifications 34 cms 3.0 series operation manual rev 3.0.0 9. Technical specifications cms 803dc models performance frequency response (-3 db) (1) bm backcan 47 hz - 30 khz frequency range (-10 db) (1) bm backcan 40 hz - 35 khz frequency range (-10 db) (1) pi backcan 41 hz - 35 khz sys...

  • Page 35: Cms 803Dcq Model

    9. Technical specifications cms 3.0 series operation manual rev 3.0.0 35 9. Technical specifications cms 803dcq model performance frequency response (-3 db) (1) 47 hz - 30 khz frequency range (-10 db) (1) 40 hz - 35 khz bm backcan frequency range (-10 db) (1) 41 hz - 35 khz pi backcan system sensiti...

  • Page 36

    10. Painting 36 cms 3.0 series operation manual rev 3.0.0 10. Painting if desired, the grille and baffle panel may be painted to match the surrounding décor. Painting the baffle: • carefully mask off the driver assembly using the paint mask provided to ensure that the paint does not come into contac...

  • Page 37

    11. Warranty cms 3.0 series operation manual rev 3.0.0 37 11. Warranty no maintenance of the cms series loudspeaker is necessary. As part of the music group, tannoy is committed to providing the highest quality products, service and user experience for our customers. One element of this commitment i...

  • Page 38

    12. Declaration of conformity 38 cms 3.0 series operation manual rev 3.0.0 12. Declaration of conformity (in accordance with iso/iec 1750-1) document no: ce-cms3-1 we: music group innovation sc ltd rosehall industrial estate, coatbridge, ml5 4tf, united kingdom in accordance with the following direc...

  • Page 39

    Cms 3.0 series operation manual rev 3.0.0 39 notes notes.

  • Page 40

    Tannoypro.Com 6481 0632/231115 tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications. All specifications are subject to change without notice. Copyright (c) 2015 music group...