1. DL manuals
  2. Tannoy
  3. Speaker System
  4. Di5 DC
  5. User Manual

Tannoy Di5 DC User Manual

Other manuals for Di5 DC: User Manual
Manual is about: Ultra compact loudspeaker system

Summary of Di5 DC

  • Page 1

    Di5, di5t, di5 dc & di5 dct di6, di6t, di6 dc & di6 dct di8 dc & di8 dct the range user manual di manual aw 0311 update.Qxd:layout 1 21/3/11 17:01 page 1.

  • Page 3

    3 designed for a wide variety of sound reinforcement applications the tannoy di is an ultra compact loudspeaker system capable of delivering high sound pressure levels with extremely low distortion, resulting in outstanding clarity, definition and detail. A truly universal solution, the di offers ou...

  • Page 4

    4 yoke trim remove the yoke trims on the top and bottom panels to access the yoke bracket fixing point input connector remove the rubber grommet to access the connector. The rubber grommet ensures the rear of the product is kept water-tight safety tab grille and trim assembly di manual aw 0311 updat...

  • Page 5

    5 grille and trim assembly yoke bracket (supplied with fixings) k-ball tm bracket pole mount adaptor the user manual ra n g e di manual aw 0311 update.Qxd:layout 1 21/3/11 17:02 page 5.

  • Page 6

    6 using supplied yoke bracket 1. Fix the yoke bracket to the surface using a suitable fixing method. 2. Remove the yoke trims from the product to access the bracket fixing points. 4. Feed the speaker cable through the rubber grommet then connect the euro-type plug to the wires, observing the correct...

  • Page 7

    7 5. Offer the speaker up to the k-ball tm bracket. Push the speaker onto the bracket to engage the euro plug. 6. Fit the rubber grommet and finger- tighten the bracket bolt while supporting the speaker. If the connector has engaged properly the speaker will lock onto the bracket 7.Swivel the speake...

  • Page 8

    8 i using optional pole mount adaptor with supplied yoke bracket 2. Fix the pole mount bracket adaptor to the pole using the strapping provided. The bracket can be mounted in portrait or landscape orientations. 3. Remove the yoke trims from the product to access the bracket fixing points. 4. Remove ...

  • Page 9

    9 5. Remove the rubber grommet from the rear of the speaker then offer the speaker up to the k-ball tm bracket. 7. Connect a secondary support line to the safety tab at the rear of the cabinet. 8. The rotary transformer tapping switch is found on the top of the di5 models, and on the bottom of the d...

  • Page 10

    155.0 [6.10"] 162.0 [6.38"] 102.0 [4.02"] 7° r300.0 [r11.81"] r165.0 [r6.50"] 260.0 [10.24"] 260.3 [10.25"] 191.0 [7.52"] 8° r550.0 [r21.65"] r400.0 [r15.75"] 404.3 [15.92"] 202.2 [7.96"] 10 240.7 [9.47"] 130.4 [5.13"] 230.0 [9.05"] 223.2 [8.79"] 159.0 [6.26"] r300.0 [r11.81"] r500.0 [r19.68"] 8° 35...

  • Page 11

    65.0 [2.56"] 180.0 [7.09"] r15.0 [r0.59"] di6 yoke 11 241.0 [9.49"] 123.0 [4.84"] 54.0 [2.13"] r15.0 [r0.59"] 85.0 [3.35"] 90.0 [3.54"] 6.0 [0.24"] ?22.0 [?0.87"] 35.0 [1.38"] 358.0 [14.09"] di6 yoke 145.0 [5.71"] 150.0 [5.91"] 35.0 [1.38"] 6.0 [0.24"] ?22.0 [?0.87"] di6 yoke [2.56"] di6 yoke r15.0 ...

  • Page 12

    12 di5 di6 system frequency response (-3db) (1) 90hz - 25khz 75hz - 22khz frequency range (-10db) (1) 80hz - 30khz 55hz - 24khz system sensitivity (1w @1m) (2) 88db 90db 1w = 2.45v for 6 ohms dispersion 90 90 degrees conical -6db low frequency driver 1x 110mm (4.50”) 1x 165mm (6.50”) mineral loaded ...

  • Page 13

    Di5 dc di6 dc di8 dc system frequency response (-3db) (1) 90hz - 50khz 75hz - 30khz 65hz - 30khz frequency range (-10db) (1) 80hz - 54khz 55hz - 35khz 53hz - 35khz system sensitivity (1w @1m) (2) 88db 89db 91db 1w = 2.83v for 8 ohms dispersion 90 90 90 degrees conical -6db low frequency driver 1x 11...

  • Page 14

    14 no maintenance of the di loudspeaker is necessary. All of our products have been produced and tested with care and precision to give first-class service. All passive components are guaranteed for a period of five years from the date of purchase from an authorised tannoy dealer subject to the abse...

  • Page 15

    15 the following apparatus is manufactured in china for tannoy ltd of rosehall industrial estate, coatbridge, scotland, ml5 4tf and conform(s) to the protection requirements of the european electromagnetic compatibility standards and directives relevant to domestic electrical equipment. The apparatu...

  • Page 16

    Tannoy (direct uk) t: 00 44 (0) 1236 420199 e: enquiries@tannoy.Com tcgi (row sales) t: 00 45 8742 7000 e: info@tcgroup-international.Com tcga (americas sales) t: 00 1 (519) 745 1158 e: info@tcgroup-americas.Com tannoy middle east t: 00 971 (04) 4401208 e: enquiries@tannoy.Com tannoy adopts a policy...