O w n e r ’ s m a n u a l 1926 estd. 6481 0490 tannoy united kingdom t: 00 44 (0) 1236 420199 e: enquiries@tannoy.Com tannoy north america t: 00 1 (519) 745 1158 e: inquiries@tannoyna.Com tannoy deutschland t: 00 49 (0180) 1111 881 e: info@tannoy.Com tannoy france t: 00 33 (0)1 7036 7473 e: ventes@t...
In combining the best of traditional crafts with the latest production and design skills, tannoy presents the glenair 10 loudspeaker. The glenair 10 embodies the tannoy philosophy and brings a fresh modern approach to our prestige range of loudspeakers. Cabinets incorporating selected hardwoods are ...
4 5 to avoid potential damage to your loudspeaker, ensure that the amplifier is switched off prior to connecting or disconnecting any cables. Before switching on double check that all connections are secure and that polarity is correct. Connection in single wire mode • without removing the link plat...
6 7 connection in bi-wire mode please note in bi-wire mode that the link plates should first be removed. • be sure that the amplifier is switched off and then prepare the two sets of cabling for each 'side' of the system separately. Measure and cut four lengths of cable, two per speaker. Label two o...
8 9 special acoustically transparent cloth is used in the grille assembly. However for the very best performance, you may wish to remove the grilles. To do this, unscrew the brass knob from the rear of the cabinet, and screw it into the threaded insert at the bottom of the grille assembly. Pull gent...
10 care of the cabinet the cabinet is constructed from carefully selected solid hardwood and veneers that have been hand finished to exacting standards. The wood should only be cleaned with a dry cloth or with a light application of quality non-silicone furniture polish, taking care not to get polis...
