Tannoy PRESTIGE TurnberrySE Owner's Manual

Summary of PRESTIGE TurnberrySE

  • Page 1

    6481 0492 o w n e r ’ s m a n u a l 1926 estd. Tannoy united kingdom t: 00 44 (0) 1236 420199 e: enquiries@tannoy.Com tannoy north america t: 00 1 (519) 745 1158 e: inquiries@tannoyna.Com tannoy deutschland t: 00 49 (0180) 1111 881 e: info@tannoy.Com tannoy france t: 00 33 (0)1 7036 7473 e: ventes@t...

  • Page 2

    Tannoy - a short history in the early days of broadcasting radio sets needed both low and high voltage dc power that had to be supplied by batteries. The lead acid batteries used in the radio sets of the time needed regular recharging. In london, in 1926, guy r. Fountain perfected a new type of elec...

  • Page 3

    Tannoy - a short history in the early days of broadcasting radio sets needed both low and high voltage dc power that had to be supplied by batteries. The lead acid batteries used in the radio sets of the time needed regular recharging. In london, in 1926, guy r. Fountain perfected a new type of elec...

  • Page 4

    4 5 loudspeakers need power signals to produce acoustic energy when reproducing music. The range of electrical currents passing down the cable from the amplifier to the loudspeaker is very wide. In decibel terms this is called the dynamic range. Modern loudspeakers are capable of resolving a dynamic...

  • Page 5

    4 5 loudspeakers need power signals to produce acoustic energy when reproducing music. The range of electrical currents passing down the cable from the amplifier to the loudspeaker is very wide. In decibel terms this is called the dynamic range. Modern loudspeakers are capable of resolving a dynamic...

  • Page 6

    High quality audio signals passing from power amplifier to loudspeaker are unusual in their demands on cable. Frequencies from 20hz to 20khz (10 octaves or a ratio of 10,000:1) and currents of 80db dynamic range (again a ratio of 10,000:1) have to coexist. The cable also has to be capable of transmi...

  • Page 7

    High quality audio signals passing from power amplifier to loudspeaker are unusual in their demands on cable. Frequencies from 20hz to 20khz (10 octaves or a ratio of 10,000:1) and currents of 80db dynamic range (again a ratio of 10,000:1) have to coexist. The cable also has to be capable of transmi...

  • Page 8

    8 9 technical specifications 30 - 180 watts per channel 110 watts rms 275 watts peak 113.5 db (110 watts rms / 1m) 117.5 db (275 watts peak / 1m) 93db (2.83 volts @ 1m) 8 ohm 34hz - 25khz 90 degree conical less than 1.5% at 110 watts rms (50hz - 20khz) 254mm (10”) dual concentric™ utilising paper pu...

  • Page 9

    8 9 technical specifications 30 - 180 watts per channel 110 watts rms 275 watts peak 113.5 db (110 watts rms / 1m) 117.5 db (275 watts peak / 1m) 93db (2.83 volts @ 1m) 8 ohm 34hz - 25khz 90 degree conical less than 1.5% at 110 watts rms (50hz - 20khz) 254mm (10”) dual concentric™ utilising paper pu...

  • Page 10

    10 11 notes notes.

  • Page 11

    10 11 notes notes.

  • Page 12

    6481 0492 o w n e r ’ s m a n u a l 1926 estd. Tannoy united kingdom t: 00 44 (0) 1236 420199 e: enquiries@tannoy.Com tannoy north america t: 00 1 (519) 745 1158 e: inquiries@tannoyna.Com tannoy deutschland t: 00 49 (0180) 1111 881 e: info@tannoy.Com tannoy france t: 00 33 (0)1 7036 7473 e: ventes@t...