Tannoy REVOLUTION Owner's Manual - page 5

STAND MOUNTING MODELS

Stand mounting or bookshelf speakers should be located securely on stands or a shelf in an appropriate position

to place the Dual Concentric™ driver high frequency unit roughly at ear height when seated in the chosen

listening position. Positioning recommendations for stand-mounted speakers can be found under the section

entitled Positioning and fine-tuning.

These models may also be wall mounted with a suitable bracket, using two inserts on the rear of the loudspeaker,

with standard 60mm spacing. The thread in the inserts is M5. It is the responsibility of the customer to ensure the

chosen bracket is used within its load rating, and the bracket is securely mounted to the wall with suitable

hardware.

INSTALLATION

To avoid potential damage to your loudspeaker, ensure that the amplifier is switched OFF prior to connecting or

disconnecting any cables. Before switching on double check that all connections are secure and that polarity 

is correct.

REVOLUTION MANUAL

_05

Revolution manual Eng.qxd:Layout 1  15/3/10  11:53  Page 5