Tannoy TS10 User Manual

Manual is about: Tannoy User Manual Subwoofer TS8, TS10

Summary of TS10

  • Page 2: Warnings and Precautions

    Operational overview 1 introduction 2 electrical connection 3 installation ® fitting of feet ® connecting to your system ® positioning ® auto power / sleep function ® overload protection ® cleaning 4 equipment overview ® ts8 ® ts10 5 technical specifications 1 introduction owner’s manual- ts8 & ts10...

  • Page 3

    Operational overview 2 electrical requirements important a mains cable is supplied with an iec moulded socket at one end and a moulded mains plug at the other end. Where the moulded plug is fitted with a mains fuse, always replace with the same 5a rated fuse. If the fitted plug is unsuitable for you...

  • Page 4

    Operational overview 2 electrical requirements fuse protection an additional mains fuse is provided in the iec power inlet on the back of the loudspeaker, which can only be removed with the power cord unplugged. This must be replaced by a fuse of the same type and rating (see specifications or refer...

  • Page 5

    Operational overview 3 installation fitting of feet screw the four cones into the inserts on the base of the cabinet. Spikes and lock nuts are provided to provide stability when used on a carpet. For use on a wooden floor, the spikes should be inverted. Connecting to your system for 2 channel stereo...

  • Page 6

    Operational overview 3 installation 2 channel stereo operation is basically the same as above, except the lfe switch should be set to off, and the xover freq. Control must be set to suit your main speakers. If you know the lower roll-off frequency of your speakers (as given in the manual), set the c...

  • Page 7

    Operational overview 255 292 280 255 4 ts8 equipment overview 8.

  • Page 8

    Operational overview 286 323 286 288 4 ts10 equipment overview 9.

  • Page 9

    Operational overview 5 technical specification ts8 ts10 output power 200w rms 300w rms low frequency response (-6db) 32hz 29hz limit for usable output 18hz 16hz inputs 2 x line level phono 2 x line level phono 2 x xlr balanced 2 x xlr balanced outputs 2 x xlr balanced 2 x xlr balanced (direct or 80h...

  • Page 10

    Tannoy loudspeakers are designed and manufactured in great britain by: tannoy ltd, rosehall industrial estate, coatbridge, north lanarkshire, ml5 4tf, scotland telephone: +44 (0)1236 420199 fax: +44 (0)1236 428230 tannoy north america inc, suite 1. 335 gage avenue, kitchener, ontario, canada, n2m 5e...