Summary of TURNBURRY 85 LE
Page 1
O w n e r ’ s m a n u a l 1926 estd. L i m i t e d e d i t i o n.
Page 3
3 contents introduction 4 tannoy - a short history 4 unpacking instructions 5 initial positioning 5 the dual concentric drive unit 5 crossover network 7 cable choice 7 connection of earth or ground lead (see figs. 1, 2, 3 and 4) 7 connection in single wire mode (see fig. 2) 8 connection in bi-wire m...
Page 4
4 introduction thank you for selecting tannoy loudspeakers developed in the uk by our dedicated team of design engineers. Tannoy is the brand of choice for discriminating music lovers around the world. Musical excellence is designed into our loudspeakers from the start. Careful selection of the very...
Page 5
5 unpacking instructions unfasten the bottom of the carton. Fold the end leaves out of the way and remove the packing tray to reveal the plinth and bottom of the loudspeaker cabinet. Locate and remove the accessories pack from the carton. Turn the carton and loudspeaker over so that the cabinet now ...
Page 6
6 the low frequency section the low frequency section of the dual concentric driver has exceptional power handling and dynamic range. The low frequency cone piston is produced from selected paper pulp. This is specially treated to absorb internal resonance modes. The twin roll fabric surround is als...
Page 7
7 crossover network during the design of the crossover network the acoustic, mechanical and electrical interactions of the high and low frequency sections have been fully analysed. The crossover is therefore an integral part of the design of the system. The crossover network provides complex equalis...
Page 8
8 connection in single wire mode (see fig. 2) connect the pair of link cables supplied in the accessory kit to each loudspeaker terminal panel as shown in the diagram. Ensure that the tightening knob grips the side entry cable terminations firmly. For optimum performance in single wire mode, loudspe...
Page 9
9 loudspeaker system adjustment (see fig. 5) each loudspeaker is fitted with a treble energy control located on the baffle beneath the detachable front grille. This high current switch block control can be used to compensate for the varied acoustic characteristics of listening rooms, or personal pre...
Page 10
10 diagrams (figs. 1,2,3,4) bi-amping mode terminal panel l power amplifier + r - + - links removed 'earth' connection on amplifier (optional) to 'ground' or to right speaker bi-wire mode 3 . G i f 1 . G i f 4 . G i f - + - + l power amplifier low frequency power amplifier high frequency l + r - - +...
Page 11
11 diagrams (fig. 5) fig 5.
Page 12
12 technical specifications performance ______________________________________________ recommended amplifier power (watts rms) 225 (maximum) continuous power handling (watts rms) 112 peak power handling (watts) 450 sensitivity (2.83 volts @ 1 m) 93 db nominal impedance (ohms) 8 frequency response (-...
Page 13
13 warranty no maintenance of the loudspeaker is necessary. Please register your tannoy product online at www.Tannoy.Com. All of our products have been produced and tested with care and precision to give first-class service. All passive components are guaranteed for a period of 5 years from the date...
Page 14
14 __________________________________________________________________________________________________ __________________________________________________________________________________________________ __________________________________________________________________________________________________ ...
Page 16
6481 0625 date : 26 october 12 tannoy limited - product designed in the united kingdom. Tannoy adopts a policy of continuous improvement and product specification is subject to change. Dual concentric is a trademark of tannoy limited. All other trademarks remain the property of their respective owne...