Quick start guide professional loudspeakers vls series.
Safety warning do not remove any covers, loosen any fixings or allow items to enter any aperture. Safety warning objects filled with liquids should not be placed on this apparatus. Avertissement de securite ne retirez pas les couvercles, ne desserrez pas les fixations et ne laissez aucune pièce s’in...
Unpacking each tannoy vls series loudspeaker is carefully tested and inspected prior to shipment. After unpacking, please inspect for any exterior physical damage, and save the carton and any relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that ...
Switch for low-z and transformer tap selection a multi-position rotary switch on the rear input panel selects either the 8 ohm low-impedance operating mode or the high-impedance modes (70 v or 100 v) with available transformer taps. When using vls series loudspeakers in distributed line systems, the...
Flying bracket – each vls series loudspeaker is also supplied with a flying bracket. The bracket is attached to the top two inserts (see below) using the supplied m6 screws. The two bottom inserts can be used as pull back if required pan-tilt bracket (optional) – a pan-tilt bracket is available whic...
Tannoy (direct uk) t: +44 (0) 1236 420199 e: enquiries@tannoy.Com tcgi (row sales) t: +46 8742 7000 e: info@tcgroup-international.Com tcga (americas sales) t: +1 (519) 745 1158 e: info@tcgroup-americas.Com tannoy middle east t: +97 1 (04) 4401208 e: enquiries@tannoy.Com tannoy.Com 6481 0607 / 0312.
