Vs15 hl user manual.
Contents 1. Introduction 2. Unpacking 3. Connectors/cabling 4. Amplification & power handling 5. Crossovers 6. Equalisation/positioning 7. Dimensions 8. Technical specifications 9. Rigging & suspension 9.1 general safety advice 9.2 secur et – vth pole mount 9.3 secur et – veb eyebolt 10. System conf...
1. Introduction the tannoy vs15hl is a horn-loaded subwoofer with very high output capability designed to provide maximum low frequency impact in conjunction with tannoy v series loudspeakers. The tight and “punchy” sound of the vs15hl adds depth and dramatic impact for a wide variety of sound reinf...
Cable choice consists mainly of selecting the correct cross sectional area in relation to the cable length and the load impedance. A small cross sectional area would increase the cables series resistance, inducing power loss and response variations (damping factor). Connectors should be wired with a...
5. Crossovers the vs15hl has been designed to be used in conjunction with tannoy controllers for optimum performance, these provides specific crossover and equalisation functions for the v series combinations as well as combinations of other tannoy products. Of course the vs15hl is compatible with o...
9. Rigging & suspension 9.1 general safety advice warning: as the legal requirements for flying change from country to country, please consult you local safety standards office before installing any product. We also recommend that you thoroughly check any laws and bylaws prior to commencing work. Qu...
9.3 secur et – veb eyebolt 7. The tannoy vs15hl loudspeaker can be flown with high quality veb m10 eyebolts with collar to bs4278:1984. The loudspeaker is equipped with internal steel braces, which also double as the flying points, and accept veb m10 eyebolts. To install the veb m10 eyebolts remove ...
10. System configurations & oem controllers with the vast array of digital loudspeaker management systems available it is inevitable that the user may opt to use a controller other than a tannoy controller as part of a large scale integrated system. The vs15hl has been designed to need no external e...
11. Vs15hl service parts & accessories part number description 7900 0598 driver kit - 3815 7900 0602 recone kit - 3815 8001 2860 vth – secur et – top hat (black) 8001 2870 vth – secur et – top hat (white) 8001 2820 veb – secur et – eyebolts m10 12. Warranty no maintenance of the vs15hl loudspeaker i...
13. Declaration of conformity the following apparatus is/are manufactured in the united kingdom by tannoy ltd of rosehall industrial estate, coatbridge, scotland, ml5 4tf and conform(s) to the protection requirements of the european electromagnetic compatibility standards and directives relevant to ...
