Tannoy VX 12 Operation Manual - page 19
12. Technical Specifications
VX Series Operation Manual rev 1.1.2
19
Model
VX 8.2
VX 12
Performance
Frequency Response (-3 dB)
1)
80 Hz – 35 Hz
70 Hz – 25 Hz
Frequency Range (-10 dB) 1
60 Hz – 45 kHz
55 Hz – 38 kHz
System Sensitivity (1 W @1 m)
2)
93 dB (1 W = 2.83 V for 8 ohms)
97 dB (1 W = 2.83 V for 8 ohms)
Dispersion (degrees conical)
90 degrees conical
90 degrees conical
Driver Complement
1 x 200 mm (8.00”) constant
1 x 305 mm (12.00”) constant
directivity Dual Concentric
directivity Dual Concentric
1 x 200mm (8.00”) bass driver
Crossover
Passive 360 Hz and 1.5 kHz
Passive 1 kHz with HF protection
with dynamic HF protection
Directivity Factor (Q)
8.1 (averaged 1 kHz to 8 kHz)
9.6 (averaged 1 kHz to 8 kHz)
Directivity Index (DI)
9.2 (averaged 1 kHz to 8 kHz)
9.8 (averaged 1 kHz to 8 kHz)
Rated Maximum SPL (2)
Average: 116 dB
Average: 120 dB
Peak: 122 dB
Peak: 126 dB
Power Handling
Average: 200 W
Average: 200 W
Programme: 400 W
Programme: 400 W
Peak: 800 W
Peak: 800 W
Recommended Amplifier Power
400 W @ 8 ohms
400 W @ 8 ohms
Nominal Impedance
8 ohms
8 ohms
Distortion
10% Full Power (10.2 V)
2nd Harmonic 3rd Harmonic
2nd Harmonic 3rd Harmonic
250 Hz
0.58% 0.34%
0.52% 0.58%
1 kHz
0.34% 0.69%
2.98% 0.63%
10 kHz
1.73% 0.15%
3.58% 0.19%
Distortion
10% Full Power (10.2 V)
2nd Harmonic 3rd Harmonic
2nd Harmonic 3rd Harmonic
250 Hz
0.15% 0.15%
0.10% 0.26%
1 kHz
0.11% 0.37%
0.81% 0.58%
10 kHz
0.74% 0.22%
1.18% 0.03%
Construction
Enclosure
24.97 litre, 15 mm (0.62”) birch plywood,
36.07 litre, 15 mm (enclosure)
vented and internally braced.
and 18 mm (front) birch plywood
vented and internally braced
Finish
Textured black or white paint,
Textured black or white paint,
with custom colours on request.
with custom colours on request.
Powder coated perforated steel grille
Powder coated perforated steel grille
Airnet cloth behind
Airnet cloth behind
Connectors
2 x speakON NL4MP
2 x speakON NL4MP
and Barrier strip
and Barrier strip
Fittings
4 x M10 yoke bracket inserts
2 x Integrip carrying handles
Blanking plate for optional VTH pole
mount
8 x M10 Flying inserts (portrait or
landscape mounting), 8 x M10 yoke
bracket inserts
2 x Integrip carrying handles
Blanking plate for optional VTH pole
mount
Fixings compatible with Omnimount
TM
and Powerdrive
TM
style brackets
Dimensions (H x W x D)
W: 280 mm (11.0”),
W: 370 mm ( 14.6”),
H: 590 mm (23.2”),
H: 486 mm (19.1”),
D: 275 mm (10.8”)
D: 360 mm (14.1”)
Net Weight
15.5 kg (34.2 lbs)
17.0 kg (37.5 lbs)
Shipped Weight
17.5 kg (38.6 lbs)
19.5 kg (43.0 lbs
Packed Quantity
1
1
(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber.
A full range of measurements, performance data, and EaseTM Data can be downloaded from www.tannoy.com.
Tannoy operates with a policy of continuous research and development. Product performance always will equal or exceed published specifications. However, following introduction of new
materials or manufacturing methods, Tannoy reserves the right to alter specifications without prior notice.