Tansun Quartzheat CARN4 1X1000H Reference manual

Summary of CARN4 1X1000H

  • Page 1

    ©tansun limited 2012 part no. 043082 issue. 1b reference manual carnival mk. 4 sk15 models for uk & europe: carn4 1x1000h, carn4 1x1300h - horizontal mounted models carn4 1x1000u, carn4 1x1300u - angled mounted models spectrum house, unit 1, ridgacre road, west bromwich, west midlands, b71 1bw, engl...

  • Page 2

    R i s k o f f i r e keep combustible materials such as furniture, papers, clothes and curtains at least 1.8m (6 feet) from the front of the heater and away from the sides and rear. If the heater is to be used outside (under an appropriate canopy), we recommend that an indoor socket is used. I n t r ...

  • Page 3

    6 fig. 9 fig. 10b 9. Pull the lamp wires through the two access holes so it is ready to be unclipped and removed from the heater (fig. 9). 10. The lamp is held in at each end by spring clips that hold the lamps ceramic caps in the lamp holders. Pull the clips back (fig. 10a) far enough to allow the ...

  • Page 4

    Fig. 3a fig. 3b 3. The heater will now be free to slide off the back plate (fig. 3a). Gently slide the heater body away from the open end as shown in fig. 3b to it from its mounting. R e p l a c i n g t h e l a m p if you are in any doubt about following the procedure below, please contact us for te...