Tansun Quartzheat Rio Grande RIO 310 EU Reference Manual

Page of 4

Download

Bookmark us

©Tansun Limited 2008 Part No. 042223 Issue. 1

F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r

s t a t e s :

The use of this symbol indicates that this product may not be treated as household waste.

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about recycling

of this product, please contact your local council, your household waste disposal service or

the shop where you purchased the product.

Reference Manual

Rio Grande

UK & EUROPEAN MODEL HEATERS:

RIO 310 UK & RIO 310 EU,

RIO 315 UK & RIO 315 EU,

RIO 320 UK & RIO 320 EU.

Spectrum House, Unit 1, Ridgacre Road, West Bromwich,

West Midlands, B71 1BW, England.

Tel: +44 (0)121 580 6200 - Fax: +44 (0)121 580 6222

Email: quartzinfo@tansun.com - Website: www.tansun.com

UK & EUROPEAN MODEL HEATERS WITH LIGHTS:

RIO 310LL UK & RIO 310LL EU,

RIO 315LL UK & RIO 315LL EU,

RIO 320LL UK & RIO 320LL EU.

Page 1
©tansun limited 2008 part no. 042223 issue. 1 f o l l o w i n g i n f o r m a t i o n i s o n l y f o r e u - m e m b e r s t a t e s : the use of this symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent p...
Page 2
R i s k o f f i r e keep combustible materials such as furniture, papers, clothes and curtains at least 1.8m (6 feet) from the front of the heater and away from the sides and rear. If the lamp is to be used outside, we recommend that a waterproof or indoor socket is used. 2 i n t r o d u c t i o n t...
Page 3
6 3. Unscrew the four screws (see fig. 1) from the end cap and remove from the heater body. Repeat at opposite end if replacing both light bulbs. Fig. 1 4. Slide out the side cover(s) to reveal the bulb(s) as shown in fig. 2. 5. Remove the light bulb by rotating it anti-clockwise until it is release...
Page 4
4 4. Disconnect the lamp from the connector blocks by unscrewing the screws highlighted above in fig. 2. 5. Unscrew the four screws (see fig. 3) from the end cap and remove from the heater body. Repeat at opposite end. R e p l a c i n g t h e e m i t t e r if you are in any doubt about following the...