Tantra TS10 Instructions Manual - Installation
DO NOT
• Obstruct the driver or ports of the Tantra subwoofer, as
that will hinder its performance.
• Place the subwoofer in any position other than in horizon
tal orientation with the feet firmly on a stable surface.
• Never place on its side or resting on the back, where the
terminals are located.
• Place the subwoofer near a heat source or in an area
where it could be subject to moisture or excessive
humidity.
INSTALLATION
Connecting the LFE Audio Input
(See Diagram 2)
1.
If your surround receiver or amplifier has a single subwoof-
er (LFE) output, plug it into the LFE input
(see Diagram 2)
.
CAUTION:
Only make connections when the Tantra sub-
woofer is turned off.
2.
The LFE Input/Outputs accept the LFE Subwoofer Output
signal from your receiver/amplifier (if so equipped) but by-
pass the crossover in the Tantra subwoofer. This is appropri-
ate for use with the LFE filtered audio signal from the receiv-
er/amplifier. Signal smoothness through the critical crossover
area is maximized since the low and high pass filtering takes
place in the receiver/amplifier. This filtering is more precise
preventing overlap of crossover points that may occur if the
LPF and HPF controls are set too close together because of
inaccurate settings.
Connecting the Line Level Audio Inputs and
Outputs
(See Diagram 1)
1.
If your receiver or amplifier has a built-in preamplifier, the
left and right Pre-outputs can be connected to the line-
level inputs
(see Diagram 3)
.
CAUTION:
Only make connections when the Tantra sub-
woofer is turned off.
INTRODUCTION
Congratulations on your selection of a new Tantra Series
subwoofer from
Tantra Audio
,
a leader in quality and tech-
nology for the new era of audio entertainment. The Tantra
subs, like all our products, are designed in the USA to meet
the needs of discriminating users, with the features needed
to ensure greater convenience, utility and value over the
long term.
Each of the Tantra subwoofers offers practically any control
function one could want right on the front panel: Power
On/Off Indicator; Volume; selectable EQ with presets for
“Movie,” “Rock” and “Jazz”; selectable Phase presets; Low
Pass Frequency adjustment from 40Hz to 120Hz; and High
Pass Frequency adjustment from 60Hz to 160Hz for line-level
outputs and High Pass Frequency On Off switch.
Moreover, the Tantra subs come with their own remote
controllers for one-touch selection of primary functions like
Power On/Off, EQ, Phase, Volume and Mute. But perhaps
the greatest benefit of a Tantra sub is its ability to deliver
tight bass of amazing depth and accuracy, no matter how
demanding the audio source might be.
The Tantra 12 and 10 subwoofers provide accurate bass to
any audio system and are designed to work in conjunction
with other audio components. They can be connected to
any multichannel surround receiver that has a subwoofer
output, any receiver that has a built-in preamplifier, or any
receiver equipped with speaker-level outputs. The pass-
through feature of the Tantra subwoofers allows the left and
right line-level input signals to be fed out of the unit to other
amplifiers or system components.
PLACEMENT
The Tantra subwoofer will provide the best possible perfor-
mance when it is placed in a corner along the same wall as
the front speakers. Because the unit is magnetically shield-
ed, it’s safe to position it near a TV screen or other video
device. Keep the following points in mind when choosing a
place for the subwoofer:
DO
• Place the Tantra subwoofer with its feet resting on a flat,
solid surface.
• Place the subwoofer in a well-vented area to provide
proper cooling. If used in an area that lacks proper ven
tilation, such as a cabinet or rack, it may be necessary to
install one or more small fans to generate air movement.
Diagram 1
Line Level
Input/ Output
3