01 contents -------------------------------------------------------------------------------------------------------------------------- 1 production introduction ----------------------------------------------------------------------------------------- 2 about tt-bs017 wireless barcode scanner -------...
02/03 • with long range wireless connection (up to 500m in open space), you can work within a large area without limitation of cables or even computers. • large internal storage can save up to 32,000 barcodes in inventory mode • designed for team work with supports for multiple scanner with a single...
4. Once the driver installed successfully, scan the “match add” scanner within 5 seconds. Now the pairing is done 04/05 charging the scanner scanner steup.
3. Scan “set receiver’s add” barcode within 5 seconds. 4. This will connect the 2nd receiver to the same scanner 5. Repeat step 2 to 3 for the remaining unpaired scanners. Set receiver’s add 4 - you can connect maximum of 16 scanners with one receiver simultaneously. Set scanner id to avoid confusio...
1. Scan “set auto-off time” bar code set auto-off time set auto-off time 2. Scan the time barcode from the following list 08/09 3.Now the scanner will be automatically powered off in the time you set. 4. Now your scanner will automatically adds the scanner id as prefix to all scan results. To disabl...
10/11 1.Scan “hide starting characters” setting code hide the starting characters “hide starting characters” setting code.
Inventory mode setting steps to use the scanner in inventory mode you must first pair the scanner with at least one receiver. To do that, please follow the previous instructions on pairing a single scanner with a single receiver. Once the scanner is successfully paired with a receiver, there are 2 w...
3. The receiver is now set to the frequency channel you have scanned 4. If you have more than 1 scanner paired to this receiver, please use each scanner (exclude the one you have just used) to scan the match add barcode 5. Repeat step 1 – 4 for every receiver in use in the same area once you have fi...
Deep sleep mode • press and hold the trigger for 11 seconds or more will cause the scanner to enter deep sleep mode. During deep sleep mode, scanner will not respond to single trigger press • to exit deep sleep mode, press and hold the trigger for 3 seconds to wake up the scanner 16/17 reset appendi...
18/19 turkey.
20/21.
22/23.
24/25.
