Taoglas ZRM500 Product specification & quick start manual - page 7
SPE-16-8-081/A/DC
Step 4: Connect to ZRM500 Wi-Fi
Open your computer’s Wi-Fi Network List and connect to your ZRM500 router. It
may take about one minute for the ZRM500 to fully power up and broadcast its
Wi-Fi ID. The ZRM500 Wi-Fi ID will look similar to Figure 5.
Connect to “zrm500-xxxxxxxx”. Please note that no password is set by default.
Step 5: Connect to ZRM500 Login Page
Open your web browser and type
http://192.168.1.1
which should bring you to the ZRM500 login page.
Enter the default username and password, see below and then click the “Login” button. See Figure 6.
Username: remote
Password: zrmea7nd4
You will now see the ‘Status’ webpage. Click on the word “Cellular” then locate the APN field and enter your APN
(APN is provided by your service provider). Click on the “Save and Apply” button. See Figure 7. Your ZRM500 is
now provisioning on the cellular network. This will take about 2 minutes. Once it has fully provisioned, you will see
the State filed change to Registered. Once it is registered you have successfully established a cellular network
connection. See Figure 8.
Figure 5
Figure 6
Figure 7
Figure 8