Tapco MIX.FX MIX10FXP User Manual - page 10

10

Rear Panel Features

2.  POWER SWITCH

Press the top of this rocker switch to turn 

on the mixer. The front panel power LED (22) 

will glow with happiness, or at least it will if 

you have the mixer plugged into a suitable 

live AC mains supply.

Press the bottom of this switch to turn off 

the mixer, whenever you feel that this would 

be a safe thing to do. Half-way through a 

guitar solo by RagnaKX, self-proclaimed 

Rock-Master-General from the Metal Planet 

Tarquin-5 might not be such a good time. 

As a general guide, you should turn on 

your mixer fi rst, before any external power 

amplifi ers or powered speakers, and turn it 

off last. This will reduce the possibility of any 

turn-on, or turn-off thumps in your speakers. 

1. POWER CONNECTION

This jack accepts the supplied  3-prong IEC 

AC power cord.

Before you plug the AC power 

cord into the powered mixer, make 

sure that the voltage of your unit 

is the same voltage as your local 

AC mains supply. Use only the power cord 

supplied. Also, disconnecting the plug’s 

ground pin is dangerous. Please don’t do it.

1

2

3

4