1. DL manuals
  2. Tappan
  3. Ranges
  4. Millennia 316000181
  5. Owner's Manual

Tappan Millennia 316000181 Owner's Manual

Manual is about: SEALED SURFACE BURNERS WITH PORCELAIN ENAMEL OR CONTINUOUS CLEANING OVEN

Summary of Millennia 316000181

  • Page 1

    P/n 316000181 (9810) gas range sealed surface burners with porcelain enamel or continuous cleaning oven product registration .................................................. 2 important safety instructions ..................... 3-4 grounding instructions ..............................................

  • Page 2: Product Registration

    2 thank you for choosing this appliance. The information contained within this owner's guide will instruct you on how to properly operate and care for your range. Please read through the information contained in your literature pack to learn more about your new appliance. Record your model and seria...

  • Page 3

    3 important safety instructions read all instructions before using this appliance. Save these instructions for future reference. This guide contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. Here is a brief explanation of the ...

  • Page 4: Grounding Instructions

    4 important instructions for using your cooktop use proper flame size—adjust flame size so it does not extend beyond the edge of the utensil. The use of undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing. Proper relationship of uten...

  • Page 5: Setting The Clock and

    5 your model may be equipped with the clock shown below. Follow the instructions to set the clock and minute timer on your range. To set the clock when the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display window. 1. Push . 2. Pu...

  • Page 6: Proper Burner

    6 for most cooking, start on the highest control setting and then turn to a lower one to complete the process. Use the chart below as a guide for determining proper flame size for various types of cooking. The size and type of utensil used and the amount of food being cooked will influence the setti...

  • Page 7: Before Setting Oven

    7 before setting oven controls arranging oven racks (some models may have one rack.) always arrange oven racks when the oven is cool (prior to operating the oven). Always use oven mitts when using the oven. Removing & replacing oven racks to remove, pull the rack forward until it stops. Lift up fron...

  • Page 8: Setting Oven Controls

    8 the surface controls shown below may not look identical to the surface controls on your range. They are only representational. Bake 1. Arrange oven racks while the oven is still cool. See "arranging oven racks" under before setting oven controls. 2. Push in and turn the temperature control knob to...

  • Page 9: Oven Cleaning

    9 adhere to the following cleaning precautions: allow the oven to cool before cleaning. Wear rubber gloves when cleaning the appliance manually. Remove spillovers and heavy soiling as soon as possible. Regular cleanings will reduce the number of major cleanings later. Ammonia must be rinsed before o...

  • Page 10: Oven Cleaning

    10 oven cleaning (continued) continuous cleaning oven (some models) continuous cleaning ovens have a special coating which is a porous ceramic material. This rough coating tends to prevent grease spatters from forming little beads which run down the side walls leaving streaks that require hand clean...

  • Page 11: General Cleaning

    11 surfaces aluminum (trim pieces) & vinyl glass, painted and plastic body parts, control knobs and decorative trim pieces control panels porcelain enamel — burner grates, cooktop surface, below cooktop, broiler pan & insert, broiler drawer, door liner and oven bottom stainless steel, chrome parts, ...

  • Page 12: General Cleaning

    12 use caution when replacing the burner cap so the electrode is not damaged. This may cause a delayed ignition or prevent the burner from igniting. Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized f...

  • Page 13: General Cleaning

    13 general cleaning (continued) to remove and replace oven door to remove oven door: 1. Open the door. 2. Remove screws located on the inside of the oven door near the hinges a (one on each side.) 3. Close the door to the quarter-open position. Grasp the door firmly on both sides and lift up and off...

  • Page 14: Avoid Service Checklist

    14 occurrence range is not level. Cannot move appliance easily. Appliance must be accessible for service. Surface burners do not light. Possible cause/solution poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the rack i...

  • Page 15

    15 burner ports are clogged. With the burner off, clean the ports with a small- gauge wire or needle. Moisture is present after cleaning. Lightly fan the flame and allow burner to operate until flame is full. Dry the burners thoroughly following instructions under general cleaning. Dust particles in...

  • Page 16: Tappan Range Warranty

    Tappan, through its authorized servicers, will: pay all costs for repairing or replacing any parts of this appliance which prove to be defective in materials or workmanship. All of the provisions of the full warranty above and the exclusions listed below apply. The consumer will be responsible for: ...