1. DL manuals
  2. Targa
  3. Monitor
  4. 22"
  5. User Manual And Service Information

Targa 22" User Manual And Service Information

Summary of 22"

  • Page 1

    Lcd- display 22" user manual and service information gb ie cy targa visionary lcd 22-1 wide hb-c_6_lcd_22-1_0809.Qxd:hb_sc_nb_traveller-kit.Qxd 30.09.2008 9:13 uhr seite 1.

  • Page 2: Operating Notes

    Targa visionary lcd 22-1 wide 1 english operating notes first of all, many thanks for choosing this high-end multiscan monitor. Before starting installation, please read this manual completely. Intended use this tft monitor is an it electronic device. It may only be used for private use, not industr...

  • Page 3: Table of Contents

    Targa visionary lcd 22-1 wide 2 english table of contents operating notes............................................................................... 1 intended use ............................................................................................ 1 conformity .............................

  • Page 4: Safety Information

    Targa visionary lcd 22-1 wide 3 english safety information during the manufacturing and testing of this monitor, the safety of the future user was our main goal. However, inadequate operation or installation can cause damage to the device and harm to the user. Therefore, please first read the follow...

  • Page 5

    Targa visionary lcd 22-1 wide 4 english do not open the monitor’s housing. The high-voltage components inside the device may produce an electric shock even after the power cord has been disconnected. Do not use the device if the casing is damaged. If this happens, it must first be examined by author...

  • Page 6

    Targa visionary lcd 22-1 wide 5 english if you notice any smoke, unusual noise or strange smells, switch off the lcd display immediately and pull the plug out from the wall outlet. Contact customer service. It is very dangerous to continue using the lcd display under these conditions. To avoid elect...

  • Page 7: Getting Started

    Targa visionary lcd 22-1 wide 6 english getting started mount the supplied socket to the base of your lcd 22-1 wide as indicated on the bottom of the base. Please check that delivery contents are complete using the list below: 1 - monitor 2 - vga cable 3 - audio cable 4 - power cord (not illustrated...

  • Page 8

    Targa visionary lcd 22-1 wide 7 english back panel connectors 6 7 8 9 quick guide 1. Connecting the video cable power your monitor and computer off. Use the vga cable (2) to connect the computer to the port (9) of the monitor. 2. Connecting the audio cable use the audio cable (3) to connect the comp...

  • Page 9

    Targa visionary lcd 22-1 wide 8 english setting the resolution the recommended screen resolution for your lcd 22-1 wide is 1680 x 1050 (max. Refresh rate 60 hz). In the following we will explain the resolution setting for the operating systems windows ® xp and windows vista ™ . For microsoft ® windo...

  • Page 10

    Targa visionary lcd 22-1 wide 9 english front panel controls 11 13 15 12 14 16 11. Display / hide the osd menu. 12. Decrease value / navigate downwards 13. Increase value / navigate upwards 14. Confirm setting 15. On/standby button 16. Power indicator.

  • Page 11

    Targa visionary lcd 22-1 wide 10 english setting the menu language you can display the osd (on screen display) menu in your local language. Proceed as follows: 1. Press button 1 (11) on the monitor. 2. Press the button (12) to select the menu option “setup menu”. 3. Press button 2 (14). The “setup m...

  • Page 12

    Targa visionary lcd 22-1 wide 11 english button function overview you can use the control buttons to access the most common settings directly. Setting brightness and contrast 1. Press the (12) or (13) buttons. The brightness and contrast menu will appear. 2. Press the (12) or (13) buttons to select ...

  • Page 13

    Targa visionary lcd 22-1 wide 12 english locking the on/standby button press and hold the 1 and buttons simultaneously until the status bar is completed to enable or disable the on/standby button lock. The lock will disable the power on/standby button (15) located on the front panel of the device. O...

  • Page 14: Osd Menu

    Targa visionary lcd 22-1 wide 13 english osd menu via the osd menu you can access multiple settings to customize the lcd 22-1 wide according to your and your computer’s requirements. Use the buttons 11 to 14 (as described on page 9) to navigate the menu. Start with the main menu by pressing button 1...

  • Page 15

    Targa visionary lcd 22-1 wide 14 english press the and buttons to choose an option and press button 2 to confirm. Then press the or buttons to select the desired value. The brightness option will be disabled while dcr is on. Dcr means „dynamic contrast ratio“ and offers an optimum contrast by adjust...

  • Page 16

    Targa visionary lcd 22-1 wide 15 english information shows information about the input signal coming from your computer’s graphics card as well as the model and serial number of your monitor. Manual image adjust: to manually adjust the picture position. Horizontal size sets the horizontal picture si...

  • Page 17

    Targa visionary lcd 22-1 wide 16 english osd time out : after the set time, the osd menu will disappear if you don’t perform any further settings. You can select values between 5, 15, 30 and 60 seconds . Osd background off : press button 2 to enable or disable the coloured background for the osd dis...

  • Page 18: Advanced

    Targa visionary lcd 22-1 wide 17 english advanced supported resolutions vga 640 x 480 @ 60hz vesa 640 x 480 @ 72hz vesa 640 x 480 @ 75hz mac 640 x 480 @ 67hz vga 720 x 400 @ 70hz vesa 800 x 600 @ 56hz vesa 800 x 600 @ 60hz vesa 800 x 600 @ 72hz vesa 800 x 600 @ 75hz mac 832 x 624 @ 75hz vesa 1024 x ...

  • Page 19

    Targa visionary lcd 22-1 wide 18 english wall-mounting you can mount your lcd 22-1 wide to the wall by using a vesa wall mount (not included in the package) with a 100 x 100 mm receptacle. To do so, disassemble the base as follows: 1. Power the device off and unplug all cables and connectors. For th...

  • Page 20

    Targa visionary lcd 22-1 wide 19 english technical specifications lcd display 22” wide tft (16:10) power management complies with energy star, vesa dpms-compatible = 1 w power on consumption: max. 55 w supported resolution max. 1680 x 1050 refresh rate max. 75 hz pixel size 0.285 x 0.285 mm display ...

  • Page 21

    Targa visionary lcd 22-1 wide 20 english troubleshooting no power make sure that the power cord is properly connected to the wall outlet and that the cables to the monitor are fixed properly into their respective ports. Connect a different electrical appliance to the wall outlet to verify that it is...

  • Page 22

    Targa visionary lcd 22-1 wide 21 english type 2: non-lighting pixel (a dark or black dot) even when it should light. Type 3: abnormal or defective sub-pixels of the basic colours (e.G. Steady lighting with half intensity, non-lighting of a specific colour, blinking or flickering, but not included in...

  • Page 23

    Targa visionary lcd 22-1 wide 22 english.

  • Page 24

    Declaration of conformity we: targa gmbh lange wende 41 59494 soest, germany declare our responsibility that the product: lcd monitor model: targa visionary lcd 22-1 wide is confirmed to comply with the requirements set out in the council directive on the approximation of the laws of the member stat...

  • Page 25

    Targa gmbh lange wende 41 d-59494 soest germany www.Targa-online.Com ready for you: www.Targa-online.Com mat.-no.: 1428348 6 hb-c_6_lcd_22-1_0809.Qxd:hb_sc_nb_traveller-kit.Qxd 30.09.2008 9:13 uhr seite 2.