1. DL manuals
  2. Targa
  3. Monitor
  4. LCD-Display 19"
  5. User Manual

Targa LCD-Display 19" User Manual

Summary of LCD-Display 19"

  • Page 1

    Lcd- display 19" user manual gb ie cy targa visionary lcd 19-6 wide 6_tft_19-6_0806.Qxd:hb_sc_nb_traveller-kit.Qxd 27.06.2008 10:01 uhr seite 1.

  • Page 2: Operating Notes

    Targa visionary lcd 19-6 wide 1 english operating notes first of all, many thanks for choosing this high-end multiscan monitor. Before starting installation, please read this manual completely. Intended use this tft monitor is an it electronic device. It may only be used for private use, not industr...

  • Page 3: Table of Contents

    Targa visionary lcd 19-6 wide 2 english table of contents operating notes............................................................................... 1 intended use ............................................................................................ 1 conformity .............................

  • Page 4: Safety Information

    Targa visionary lcd 19-6 wide 3 english safety information during the manufacturing and testing of this monitor, the safety of the future user was our main goal. However, inadequate operation or installation can cause damage to the device and harm to the user. Therefore, please first read the follow...

  • Page 5

    Targa visionary lcd 19-6 wide 4 english do not open the monitor’s housing. The high-voltage components inside the device may produce an electric shock even after the power cord has been disconnected. Do not use the device if the casing is damaged. If this happens, it must first be examined by author...

  • Page 6

    Targa visionary lcd 19-6 wide 5 english if you notice any smoke, unusual noise or strange smells, switch off the lcd display immediately and pull the plug out from the wall outlet. Contact customer service. It is very dangerous to continue using the lcd display under these conditions. To avoid elect...

  • Page 7: Getting Started

    Targa visionary lcd 19-6 wide 6 english getting started mount the supplied socket to the base of your lcd 19-6 wide as indicated on the bottom of the base. Please check that delivery contents are complete using the list below: 1 - monitor 2 - vga cable 3 - audio cable 4 - power cord 5 - user’s manua...

  • Page 8

    Targa visionary lcd 19-6 wide 7 english back panel connectors 6 7 8 9 quick guide 1. Connecting the video cable power your monitor and computer off. Use the vga cable (2) to connect the computer to the port (9) of the monitor. 2. Connecting the audio cable use the audio cable (3) to connect the comp...

  • Page 9

    Targa visionary lcd 19-6 wide 8 english setting the resolution the recommended screen resolution for your lcd 19-6 wide is 1440 x 900 (max. Refresh rate 75 hz). In the following we will explain the resolution setting for the operating systems windows ® xp and windows vista ™ . For microsoft ® window...

  • Page 10

    Targa visionary lcd 19-6 wide 9 english front panel controls 11 13 15 12 14 16 11. Display / hide the osd menu. 12. Decrease value / navigate downwards 13. Increase value / navigate upwards 14. Confirm setting 15. On/standby switch 16. Power indicator.

  • Page 11

    Targa visionary lcd 19-6 wide 10 english setting the menu language you can display the osd (on screen display) menu in your local language. Proceed as follows: 1. Press button 1 (11) on the monitor. 2. Press the button (12) to select the menu option “setup menu”. 3. Press button 2 (14). The “setup m...

  • Page 12

    Targa visionary lcd 19-6 wide 11 english 4. Press the (12) or (13) buttons to select the desired value. 5. Wait until the menu disappears or press button 1 (11) twice to exit the menu immediately. Dcr means „dynamic contrast ratio“ and offers an optimum contrast by adjusting the display backlight au...

  • Page 13: Osd Menu

    Targa visionary lcd 19-6 wide 12 english osd menu via the osd menu you can access multiple settings to customize the lcd 19-6 wide according to your and your computer’s requirements. Use the buttons 11 to 14 (as described on page 9) to navigate the menu. Start with the main menu by pressing button 1...

  • Page 14

    Targa visionary lcd 19-6 wide 13 english contrast/brightness opens the contrast and brightness menu. Press the and buttons to choose an option and press button 2 to confirm. Then press the or buttons to select the desired value. The brightness option will be disabled while dcr is on. Dcr means „dyna...

  • Page 15

    Targa visionary lcd 19-6 wide 14 english information shows information about the input signal coming from your computer’s graphics card as well as the model and serial number of your monitor. Manual image adjust: to manually adjust the picture position. Horizontal size sets the horizontal picture si...

  • Page 16

    Targa visionary lcd 19-6 wide 15 english osd time out : after the set time, the osd menu will disappear if you don’t perform any further settings. You can select values between 5, 15, 30 and 60 seconds . Osd background off : press button 2 to enable or disable the coloured background for the osd dis...

  • Page 17: Advanced

    Targa visionary lcd 19-6 wide 16 english advanced supported resolutions vesa 640 x 480 @ 75hz mac 640 x 480 @ 67hz vga 640 x 480 @ 70hz vga 720 x 400 @ 70hz vesa 800 x 600 @ 56hz vesa 800 x 600 @ 60hz vesa 800 x 600 @ 72hz vesa 800 x 600 @ 75hz vesa 848 x 480 @ 60hz vesa 1024 x 768 @ 60hz mac 1024 x...

  • Page 18

    Targa visionary lcd 19-6 wide 17 english wall-mounting you can mount your lcd 19-6 wide to the wall by using a vesa wall mount with a 100 x 100 mm receptacle. To do so, disassemble the base as follows: 1. Power the device off and unplug all cables and connectors. For the following steps you’ll need ...

  • Page 19

    Targa visionary lcd 19-6 wide 18 english technical specifications lcd display 19.0” wide tft (16:10) power management complies with energy star, vesa dpms-compatible = 1 w power on consumption: max. 45 w supported resolution max. 1440 x 900 refresh rate max. 75 hz pixel size 0.285 x 0.285 mm display...

  • Page 20

    Targa visionary lcd 19-6 wide 19 english troubleshooting no power make sure that the power cord is properly connected to the wall outlet and that the cables to the monitor are fixed properly into their respective ports. Connect a different electrical appliance to the wall outlet to verify that it is...

  • Page 21

    Targa visionary lcd 19-6 wide 20 english type 2: non-lighting pixel (a dark or black dot) even when it should light. Type 3: abnormal or defective sub-pixels of the basic colours (e.G. Steady lighting with half intensity, non-lighting of a specific colour, blinking or flickering, but not included in...

  • Page 22

    Targa gmbh lange wende 41 d-59494 soest deutschland www.Targa-online.Com ready for you: www.Targa-online.Com 6_tft_19-6_0806.Qxd:hb_sc_nb_traveller-kit.Qxd 27.06.2008 10:01 uhr seite 2.